Lines Matching +full:system +full:- +full:on +full:- +full:module
1 # SPDX-License-Identifier: GPL-2.0
5 # PARIDE doesn't need PARPORT, but if PARPORT is configured as a module,
6 # PARIDE must also be a module.
9 comment "Parallel IDE high-level drivers"
10 depends on PARIDE
14 depends on PARIDE
16 This option enables the high-level driver for IDE-type disk devices
20 it as a loadable module. The module will be called pd. You
22 system. Among the devices supported by this driver are the SyQuest
23 EZ-135, EZ-230 and SparQ drives, the Avatar Shark and the backpack
27 tristate "Parallel port ATAPI CD-ROMs"
28 depends on PARIDE
32 This option enables the high-level driver for ATAPI CD-ROM devices
35 parallel port ATAPI CD-ROM driver, otherwise you should answer M to
36 build it as a loadable module. The module will be called pcd. You
38 system. Among the devices supported by this driver are the
39 MicroSolutions backpack CD-ROM drives and the Freecom Power CD. If
40 you have such a CD-ROM drive, you should also say Y or M to "ISO
41 9660 CD-ROM file system support" below, because that's the file
42 system used on CD-ROMs.
46 depends on PARIDE
48 This option enables the high-level driver for ATAPI disk devices
52 to build it as a loadable module. The module will be called pf.
54 your system. Among the devices supported by this driver are the
56 LS-120 drive.
60 depends on PARIDE
62 This option enables the high-level driver for ATAPI tape devices
66 to build it as a loadable module. The module will be called pt.
68 your system. Among the devices supported by this driver is the
73 depends on PARIDE
75 This option enables a special high-level driver for generic ATAPI
82 otherwise you should answer M to build it as a loadable module. The
83 module will be called pg.
86 your system.
96 depends on PARIDE
99 tristate "ATEN EH-100 protocol"
100 depends on PARIDE
102 This option enables support for the ATEN EH-100 parallel port IDE
107 loadable module. The module will be called aten. You must also
108 have a high-level driver for the type of device that you want to
113 depends on PARIDE
118 Series noted on the bottom of the drive. Series 6 drivers will.
120 In other words, if your BACKPACK drive doesn't say "Series 6" on the
125 answer M to build it as a loadable module. The module will be
126 called bpck. You must also have a high-level driver for the type
131 depends on PARIDE && !64BIT
136 on the bottom of the drive. Series 5 drivers don't always have it
139 In other words, if your BACKPACK drive says "Series 6" on the
144 answer M to build it as a loadable module. The module will be
145 called bpck6. You must also have a high-level driver for the type
150 depends on PARIDE
156 module. The module will be called comm. You must also have
157 a high-level driver for the type of device that you want to support.
160 tristate "DataStor EP-2000 protocol"
161 depends on PARIDE
163 This option enables support for the EP-2000 parallel port IDE
167 module. The module will be called dstr. You must also have
168 a high-level driver for the type of device that you want to support.
171 tristate "FIT TD-2000 protocol"
172 depends on PARIDE
174 This option enables support for the TD-2000 parallel port IDE
179 to build it as a loadable module. The module will be called ktti.
180 You must also have a high-level driver for the type of device that
184 tristate "FIT TD-3000 protocol"
185 depends on PARIDE
187 This option enables support for the TD-3000 parallel port IDE
189 used in newer models of their portable disk, CD-ROM and PD/CD
192 should answer M to build it as a loadable module. The module will be
193 called fit3. You must also have a high-level driver for the type
198 depends on PARIDE
203 Hewlett-Packard, SyQuest, Imation and Avatar. If you chose to build
206 loadable module. The module will be called epat. You must also
207 have a high-level driver for the type of device that you want to
212 depends on PARIDE_EPAT
216 (LS-120) drive.
220 depends on PARIDE
224 found in some no-name kits. If you chose to build PARIDE support
227 module. The module will be called epia. You must also have a
228 high-level driver for the type of device that you want to support.
231 tristate "Freecom IQ ASIC-2 protocol"
232 depends on PARIDE
238 should answer M to build it as a loadable module. The module will be
239 called friq. You must also have a high-level driver for the type
244 depends on PARIDE
249 should answer M to build it as a loadable module. The module will be
250 called frpw. You must also have a high-level driver for the type
254 tristate "KingByte KBIC-951A/971A protocols"
255 depends on PARIDE
257 This option enables support for the KBIC-951A and KBIC-971A parallel
259 adapters appear in many no-name portable disk and CD-ROM products,
262 otherwise you should answer M to build it as a loadable module. The
263 module will be called kbic. You must also have a high-level driver
268 depends on PARIDE
275 loadable module. The module will be called ktti. You must also
276 have a high-level driver for the type of device that you want to
281 depends on PARIDE
287 should answer M to build it as a loadable module. The module will
288 be called on20. You must also have a high-level driver for the
293 depends on PARIDE
299 should answer M to build it as a loadable module. The module will be
300 called on26. You must also have a high-level driver for the type