981 	              (rpd->atm_header.vpi << ATM_HDR_VPI_SHIFT) |  in fore200e_push_rpd()
1038 		vcc->itf, vcc->vpi, vcc->vci);  in fore200e_push_rpd()
1102 	vc_map = FORE200E_VC_MAP(fore200e, entry->rpd->atm_header.vpi, entry->rpd->atm_header.vci);  in fore200e_rx_irq()
1109 		    entry->rpd->atm_header.vpi, entry->rpd->atm_header.vci);  in fore200e_rx_irq()
1122 			entry->rpd->atm_header.vpi, entry->rpd->atm_header.vci);  in fore200e_rx_irq()
1218 	    vcc->itf, vcc->vpi, vcc->vci, scheme);  in fore200e_select_scheme()
1251     vpvc.vpi = vcc->vpi;  in fore200e_activate_vcin()
1276 	       activate ? "open" : "close", vcc->itf, vcc->vpi, vcc->vci);  in fore200e_activate_vcin()
1280     DPRINTK(1, "VC %d.%d.%d %sed\n", vcc->itf, vcc->vpi, vcc->vci,   in fore200e_activate_vcin()
1313     short		    vpi = vcc->vpi;  in fore200e_open()  local
1315     ASSERT((vpi >= 0) && (vpi < 1<<FORE200E_VPI_BITS));  in fore200e_open()
1320     vc_map = FORE200E_VC_MAP(fore200e, vpi, vci);  in fore200e_open()
1326 	       fore200e->atm_dev->number, vpi, vci);  in fore200e_open()
1343 	    vcc->itf, vcc->vpi, vcc->vci, fore200e_atm2fore_aal(vcc->qos.aal),  in fore200e_open()
1395 		vcc->itf, vcc->vpi, vcc->vci, fore200e_atm2fore_aal(vcc->qos.aal),  in fore200e_open()
1425     ASSERT((vcc->vpi >= 0) && (vcc->vpi < 1<<FORE200E_VPI_BITS));  in fore200e_close()
1428 …DPRINTK(2, "closing %d.%d.%d:%d\n", vcc->itf, vcc->vpi, vcc->vci, fore200e_atm2fore_aal(vcc->qos.a…  in fore200e_close()
1436     vc_map = FORE200E_VC_MAP(fore200e, vcc->vpi, vcc->vci);  in fore200e_close()
1441     vcc->itf = vcc->vci = vcc->vpi = 0;  in fore200e_close()
1499 	DPRINTK(1, "VC %d.%d.%d not ready for tx\n", vcc->itf, vcc->vpi, vcc->vpi);  in fore200e_send()
1554     vc_map = FORE200E_VC_MAP(fore200e, vcc->vpi, vcc->vci);  in fore200e_send()
1621 	    vcc->itf, vcc->vpi, vcc->vci, fore200e_atm2fore_aal(vcc->qos.aal),  in fore200e_send()
1638 	tpd->atm_header.vpi = (*cell_header & ATM_HDR_VPI_MASK) >> ATM_HDR_VPI_SHIFT;  in fore200e_send()
1646 	tpd->atm_header.vpi = vcc->vpi;  in fore200e_send()
1891 	DPRINTK(1, "VC %d.%d.%d not ready for QoS change\n", vcc->itf, vcc->vpi, vcc->vpi);  in fore200e_change_qos()
1899 	    vcc->itf, vcc->vpi, vcc->vci,  in fore200e_change_qos()
2978 			  vcc->vpi, vcc->vci, fore200e_atm2fore_aal(vcc->qos.aal),  in fore200e_proc_read()