boot/dts/ste-dbx5x0-pinctrl.dtsi

1 // SPDX-License-Identifier: GPL-2.0-or-later
6 #include "ste-nomadik-pinctrl.dtsi"
132 				pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
139 				pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
152 				pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
159 				pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
172 				pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
179 				pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
192 				pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
199 				pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
206 	 * Activating I2C4 will conflict with UART1 about the same pins so do not
207 	 * enable I2C4 and UART1 at the same time.
209 	i2c4 {
212 				function = "i2c4";
216 				pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
223 				pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
466 		/* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */
518 	 * Multi-rate serial ports (MSPs) - MSP3 output is internal and