boot/dts/rv1126-bat-ipc-v10.dts

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include "rv1126-bat-ipc.dtsi"
9 #include "rv1126-thunder-boot-emmc.dtsi"
10 #include <dt-bindings/input/input.h>
14 	compatible = "rockchip,rv1126-bat-ipc-v10", "rockchip,rv1126";
16 	adc-keys {
17 		compatible = "adc-keys";
18 		io-channels = <&saradc 0>;
19 		io-channel-names = "buttons";
20 		poll-interval = <100>;
21 		keyup-threshold-microvolt = <1800000>;
26 			press-threshold-microvolt = <0>;
33 		pinctrl-names = "default";
34 		pinctrl-0 = <&ir_cut_en>;
35 		ircut-open-gpios = <&gpio2 RK_PD5 GPIO_ACTIVE_HIGH>;
36 		led-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>;
37 		rockchip,camera-module-index = <1>;
38 		rockchip,camera-module-facing = "front";
42 		compatible = "gpio-charger";
43 		pinctrl-names = "default";
44 		pinctrl-0 = <&charger_io>;
46 		charger-type = "usb-dcp";
47 		charge-status-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_LOW>;
48 		charge-current-limit-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>,
50 		charge-current-limit-mapping = <2000000 0x03>, <500000 0x00>;
54 	gpio-poweroff {
55 		compatible = "gpio-poweroff";
57 		pinctrl-names = "default";
58 		pinctrl-0 = <&power_hold>;
61 	i2s0_sound: i2s0-sound {
63 		compatible = "simple-audio-card";
64 		simple-audio-card,format = "i2s";
65 		simple-audio-card,mclk-fs = <256>;
66 		simple-audio-card,name = "rockchip,i2s0-sound";
67 		simple-audio-card,cpu {
68 			sound-dai = <&i2s0_8ch>;
70 		simple-audio-card,codec {
71 			sound-dai = <&es8311>;
76 		compatible = "pwm-leds";
80 			max-brightness = <255>;
86 			max-brightness = <255>;
87 			linux,default-trigger = "heartbeat";
93 		pulse-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_LOW>;
96 	vcc1v2_dvdd: vcc1v8_dovdd: vcc2v8_avdd: vcc-camera {
97 		compatible = "regulator-fixed";
98 		regulator-name = "vcc_camera";
99 		regulator-boot-on;
101 		enable-active-high;
104 	vcc_1v8: vcc-1v8 {
105 		compatible = "regulator-fixed";
106 		regulator-name = "vcc_1v8";
107 		regulator-always-on;
108 		regulator-boot-on;
109 		regulator-min-microvolt = <1800000>;
110 		regulator-max-microvolt = <1800000>;
113 	vccio_flash: vccio-flash {
114 		compatible = "regulator-fixed";
115 		regulator-name = "vccio_flash";
116 		regulator-always-on;
117 		regulator-boot-on;
118 		regulator-min-microvolt = <1800000>;
119 		regulator-max-microvolt = <1800000>;
120 		vin-supply = <&vcc_1v8>;
123 	vccio_sd: vccio-sd {
124 		compatible = "regulator-gpio";
125 		regulator-name = "vccio_sd";
126 		regulator-min-microvolt = <1800000>;
127 		regulator-max-microvolt = <3300000>;
133 	vdd_npu_vepu: vdd-npu-vepu {
134 		compatible = "pwm-regulator";
136 		regulator-name = "vdd_npu_vepu";
137 		regulator-min-microvolt = <720000>;
138 		regulator-max-microvolt = <1000000>;
139 		regulator-init-microvolt = <824000>;
140 		regulator-always-on;
141 		regulator-boot-on;
142 		regulator-settling-time-up-us = <250>;
143 		pwm-supply = <&vcc_3v3>;
146 	wireless-wlan {
147 		compatible = "wlan-platdata";
149 		pinctrl-names = "default";
150 		pinctrl-0 = <&wifi_wake_host>;
162 		#address-cells = <1>;
163 		#size-cells = <0>;
166 			#address-cells = <1>;
167 			#size-cells = <0>;
171 				remote-endpoint = <&ucam_out0>;
172 				data-lanes = <1 2>;
177 			#address-cells = <1>;
178 			#size-cells = <0>;
182 				remote-endpoint = <&isp_in>;
189 	bus-width = <8>;
190 	cap-mmc-highspeed;
191 	non-removable;
192 	mmc-hs200-1_8v;
193 	rockchip,default-sample-phase = <90>;
194 	no-sdio;
195 	no-sd;
196 	/delete-property/ pinctrl-names;
197 	/delete-property/ pinctrl-0;
203 	clock-frequency = <100000>;
222 		interrupt-parent = <&gpio0>;
224 		pinctrl-names = "default";
225 		pinctrl-0 = <&rtc_int>;
226 		#clock-cells = <0>;
227 		clock-frequency = <32768>;
228 		clock-output-names = "xin32k";
239 		clock-names = "xvclk";
240 		power-domains = <&power RV1126_PD_VI>;
241 		avdd-supply = <&vcc2v8_avdd>;
242 		dovdd-supply = <&vcc1v8_dovdd>;
243 		dvdd-supply = <&vcc1v2_dvdd>;
244 		pwdn-gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
245 		reset-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
246 		rockchip,camera-module-index = <1>;
247 		rockchip,camera-module-facing = "front";
248 		rockchip,camera-module-name = "YT-SC210-V2";
249 		rockchip,camera-module-lens-name = "M12-30IRC-2MP-F18";
250 		ir-cut = <&cam_ircut0>;
254 				remote-endpoint = <&mipi_in_ucam0>;
255 				data-lanes = <1 2>;
263 	clock-frequency = <400000>;
264 	pinctrl-0 = <&i2c4m1_xfer>;
270 		clock-names = "mclk";
271 		adc-pga-gain = <6>;  /* 18dB */
272 		adc-volume = <0xbf>;  /* 0dB */
273 		dac-volume = <0xbf>;  /* 0dB */
274 		aec-mode = "dac left, adc right";
275 		pinctrl-names = "default";
276 		pinctrl-0 = <&i2s0m0_mclk &spk_ctl>;
277 		assigned-clocks = <&cru MCLK_I2S0_TX_OUT2IO>;
278 		assigned-clock-parents = <&cru MCLK_I2S0_TX>;
279 		spk-ctl-gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_HIGH>;
280 		#sound-dai-cells = <0>;
286 	#sound-dai-cells = <0>;
287 	rockchip,clk-trcm = <1>;
288 	rockchip,i2s-rx-route = <3 0 1 2>;
289 	pinctrl-0 = <&i2s0m0_sclk_tx
300 	npu-supply = <&vdd_npu_vepu>;
305 		/omit-if-no-ref/
306 		charger_io: charger-io {
312 		spk_ctl: spk-ctl {
316 	ir-cut {
317 		/omit-if-no-ref/
318 		ir_cut_en: ir-cut-en {
323 		/omit-if-no-ref/
324 		power_hold: power-hold {
330 		/omit-if-no-ref/
331 		rtc_int: rtc-int {
335 	wireless-wlan {
336 		/omit-if-no-ref/
337 		wifi_wake_host: wifi-wake-host {
346 	pmuio0-supply = <&vcc_1v8>;
347 	pmuio1-supply = <&vcc_3v3>;
348 	vccio2-supply = <&vccio_sd>;
349 	vccio3-supply = <&vcc_1v8>;
350 	vccio4-supply = <&vcc_1v8>;
351 	vccio5-supply = <&vcc_3v3>;
352 	vccio7-supply = <&vcc_3v3>;
357 	pinctrl-names = "active";
358 	pinctrl-0 = <&pwm1m0_pins_pull_down>;
363 	pinctrl-names = "active";
364 	pinctrl-0 = <&pwm2m1_pins_pull_down>;
369 	pinctrl-names = "active";
370 	pinctrl-0 = <&pwm3m1_pins_pull_down>;
381 			#address-cells = <1>;
382 			#size-cells = <0>;
386 				remote-endpoint = <&csidphy0_out>;
393 	venc-supply = <&vdd_npu_vepu>;
406 	rockchip,sleep-debug-en = <1>;
407 	rockchip,sleep-mode-config = <
418 	vref-supply = <&vcc_1v8>;
422 	max-frequency = <50000000>;
423 	bus-width = <4>;
424 	cap-sd-highspeed;
425 	cap-sdio-irq;
426 	keep-power-in-suspend;
427 	rockchip,default-sample-phase = <90>;
428 	no-sd;
429 	no-mmc;
430 	supports-chip-alive;
431 	logic-remove-card;
436 	bus-width = <4>;
437 	cap-mmc-highspeed;
438 	cap-sd-highspeed;
439 	card-detect-delay = <200>;
440 	rockchip,default-sample-phase = <90>;
441 	no-sdio;
442 	no-mmc;
443 	sd-uhs-sdr12;
444 	sd-uhs-sdr25;
445 	sd-uhs-sdr104;
446 	vqmmc-supply = <&vccio_sd>;
451 	vup-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_LOW>;