Lines Matching +full:rk3288 +full:- +full:mali
4 * This file is dual-licensed: you can use it either under the terms
43 /dts-v1/;
44 #include "rk3288-evb.dtsi"
45 #include "rk3288-android.dtsi"
48 compatible = "rockchip,rk3288-evb-android-rk818", "rockchip,rk3288";
50 sdio_pwrseq: sdio-pwrseq {
51 compatible = "mmc-pwrseq-simple";
53 clock-names = "ext_clock";
58 * - SDIO_RESET_L_WL_REG_ON
59 * - PDN (power down when low)
61 reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
64 wireless-bluetooth {
66 clock-names = "ext_clock";
69 /delete-node/ sdmmc-regulator;
71 vcc_lcd: vcc-lcd {
72 compatible = "regulator-fixed";
73 enable-active-high;
74 regulator-boot-on;
76 pinctrl-names = "default";
77 pinctrl-0 = <&lcd_en>;
78 regulator-name = "vcc_lcd";
79 vin-supply = <&vcc_io>;
83 compatible = "fixed-clock";
84 clock-frequency = <32768>;
85 clock-output-names = "xin32k";
86 #clock-cells = <0>;
91 cpu-supply = <&vdd_cpu>;
96 mali-supply = <&vdd_gpu>;
104 clock-frequency = <400000>;
109 vin-supply = <&vcc_sys>;
110 regulator-compatible = "fan53555-reg";
111 pinctrl-0 = <&vsel1_gpio>;
112 vsel-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
113 regulator-name = "vdd_cpu";
114 regulator-min-microvolt = <712500>;
115 regulator-max-microvolt = <1500000>;
116 regulator-ramp-delay = <1000>;
117 fcs,suspend-voltage-selector = <1>;
118 regulator-always-on;
119 regulator-boot-on;
120 regulator-initial-state = <3>;
121 regulator-state-mem {
122 regulator-off-in-suspend;
131 clock-output-names = "rk818-clkout1", "wifibt_32kin";
132 interrupt-parent = <&gpio0>;
134 pinctrl-names = "default";
135 pinctrl-0 = <&pmic_int>;
136 rockchip,system-power-controller;
137 wakeup-source;
138 #clock-cells = <1>;
140 vcc1-supply = <&vcc_sys>;
141 vcc2-supply = <&vcc_sys>;
142 vcc3-supply = <&vcc_sys>;
143 vcc4-supply = <&vcc_sys>;
144 vcc6-supply = <&vcc_sys>;
145 vcc7-supply = <&vcc_sys>;
146 vcc8-supply = <&vcc_sys>;
147 vcc9-supply = <&vcc_io>;
151 regulator-name = "vdd_logic";
152 regulator-always-on;
153 regulator-boot-on;
154 regulator-min-microvolt = <800000>;
155 regulator-max-microvolt = <1250000>;
156 regulator-ramp-delay = <6001>;
157 regulator-state-mem {
158 regulator-on-in-suspend;
159 regulator-suspend-microvolt = <1000000>;
164 regulator-name = "vdd_gpu";
165 regulator-always-on;
166 regulator-boot-on;
167 regulator-min-microvolt = <800000>;
168 regulator-max-microvolt = <1250000>;
169 regulator-ramp-delay = <6001>;
170 regulator-state-mem {
171 regulator-on-in-suspend;
172 regulator-suspend-microvolt = <1000000>;
177 regulator-always-on;
178 regulator-boot-on;
179 regulator-name = "vcc_ddr";
180 regulator-state-mem {
181 regulator-on-in-suspend;
186 regulator-always-on;
187 regulator-boot-on;
188 regulator-min-microvolt = <3300000>;
189 regulator-max-microvolt = <3300000>;
190 regulator-name = "vcc_io";
191 regulator-state-mem {
192 regulator-off-in-suspend;
197 regulator-always-on;
198 regulator-boot-on;
199 regulator-min-microvolt = <3300000>;
200 regulator-max-microvolt = <3300000>;
201 regulator-name = "vcca_codec";
202 regulator-state-mem {
203 regulator-off-in-suspend;
208 regulator-always-on;
209 regulator-boot-on;
210 regulator-min-microvolt = <3300000>;
211 regulator-max-microvolt = <3300000>;
212 regulator-name = "vcc_tp";
213 regulator-state-mem {
214 regulator-off-in-suspend;
219 regulator-always-on;
220 regulator-boot-on;
221 regulator-min-microvolt = <1000000>;
222 regulator-max-microvolt = <1000000>;
223 regulator-name = "vdd_10";
224 regulator-state-mem {
225 regulator-on-in-suspend;
226 regulator-suspend-microvolt = <1000000>;
231 regulator-always-on;
232 regulator-boot-on;
233 regulator-min-microvolt = <1800000>;
234 regulator-max-microvolt = <1800000>;
235 regulator-name = "vcc18_lcd";
236 regulator-state-mem {
237 regulator-off-in-suspend;
242 regulator-always-on;
243 regulator-boot-on;
244 regulator-min-microvolt = <3300000>;
245 regulator-max-microvolt = <3300000>;
246 regulator-name = "vccio_pmu";
247 regulator-state-mem {
248 regulator-on-in-suspend;
249 regulator-suspend-microvolt = <3300000>;
254 regulator-always-on;
255 regulator-boot-on;
256 regulator-min-microvolt = <1000000>;
257 regulator-max-microvolt = <1000000>;
258 regulator-name = "vdd10_lcd";
259 regulator-state-mem {
260 regulator-off-in-suspend;
265 regulator-always-on;
266 regulator-boot-on;
267 regulator-min-microvolt = <1800000>;
268 regulator-max-microvolt = <1800000>;
269 regulator-name = "vcc_18";
270 regulator-state-mem {
271 regulator-on-in-suspend;
272 regulator-suspend-microvolt = <1800000>;
277 regulator-always-on;
278 regulator-boot-on;
279 regulator-min-microvolt = <1800000>;
280 regulator-max-microvolt = <3300000>;
281 regulator-name = "vccio_wl";
282 regulator-state-mem {
283 regulator-on-in-suspend;
284 regulator-suspend-microvolt = <3300000>;
289 regulator-always-on;
290 regulator-boot-on;
291 regulator-min-microvolt = <1800000>;
292 regulator-max-microvolt = <3300000>;
293 regulator-name = "vccio_sd";
294 regulator-state-mem {
295 regulator-on-in-suspend;
296 regulator-suspend-microvolt = <3300000>;
301 regulator-always-on;
302 regulator-boot-on;
303 regulator-name = "vcc_sd";
304 regulator-state-mem {
305 regulator-on-in-suspend;
314 clock-frequency = <400000>;
319 pinctrl-names = "default";
320 pinctrl-0 = <&mpu6050_irq_gpio>;
322 irq-gpio = <&gpio8 0 IRQ_TYPE_EDGE_RISING>;
323 mpu-int_config = <0x10>;
324 mpu-level_shifter = <0>;
325 mpu-orientation = <0 1 0 1 0 0 0 0 1>;
326 orientation-x= <0>;
327 orientation-y= <1>;
328 orientation-z= <0>;
329 support-hw-poweroff = <1>;
330 mpu-debug = <1>;
335 power-supply = <&vcc_lcd>;
340 rockchip,lane-rate = <1000>;
343 compatible = "simple-panel-dsi";
345 power-supply = <&vcc_lcd>;
349 reset-delay-ms = <20>;
350 init-delay-ms = <20>;
351 enable-delay-ms = <120>;
352 prepare-delay-ms = <120>;
355 disp_timings: display-timings {
356 native-mode = <&timing0>;
359 clock-frequency = <150000000>;
362 hback-porch = <80>;
363 hfront-porch = <81>;
364 vback-porch = <21>;
365 vfront-porch = <21>;
366 hsync-len = <10>;
367 vsync-len = <3>;
368 hsync-active = <0>;
369 vsync-active = <0>;
370 de-active = <0>;
371 pixelclk-active = <0>;
395 compatible ="lg,lp079qx1-sp0v", "simple-panel";
397 enable-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
398 enable-delay-ms = <120>;
399 pinctrl-0 = <&lcd_cs>;
400 power-supply = <&vcc_lcd>;
403 display-timings {
404 native-mode = <&F402>;
407 clock-frequency = <200000000>;
410 hfront-porch = <12>;
411 hsync-len = <16>;
412 hback-porch = <48>;
413 vfront-porch = <8>;
414 vsync-len = <4>;
415 vback-porch = <8>;
416 hsync-active = <0>;
417 vsync-active = <0>;
418 de-active = <0>;
419 pixelclk-active = <0>;
438 rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
443 lcd_en: lcd-en {
449 mpu6050_irq_gpio: mpu6050-irq-gpio {
455 pmic_int: pmic-int {
458 vsel1_gpio: vsel1-gpio {