boot/dts/rk3288-evb-android-act8846-edp.dts

2  * This file is dual-licensed: you can use it either under the terms
41 /dts-v1/;
42 #include "rk3288-evb.dtsi"
43 #include "rk3288-android.dtsi"
46 	compatible = "rockchip,rk3288-evb-act8846", "rockchip,rk3288";
49 		compatible = "pwm-backlight";
50 		brightness-levels = <
83 		default-brightness-level = <128>;
84 		enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
85 		pinctrl-names = "default";
86 		pinctrl-0 = <&bl_en>;
90 	sdio_pwrseq: sdio-pwrseq {
91 		compatible = "mmc-pwrseq-simple";
93 		clock-names = "ext_clock";
94 		pinctrl-names = "default";
95 		pinctrl-0 = <&wifi_enable_h>;
100 		 * - SDIO_RESET_L_WL_REG_ON
101 		 * - PDN (power down when low)
103 		reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
106 	vcc_lcd: vcc-lcd {
107 		compatible = "regulator-fixed";
108 		enable-active-high;
110 		pinctrl-names = "default";
111 		pinctrl-0 = <&lcd_en>;
112 		regulator-name = "vcc_lcd";
113 		vin-supply = <&vcc_io>;
116 	vcc_wl: vcc-wl {
117 		compatible = "regulator-fixed";
118 		enable-active-high;
120 		pinctrl-names = "default";
121 		pinctrl-0 = <&wifi_pwr>;
122 		regulator-name = "vcc_wl";
123 		vin-supply = <&vcc_18>;
128 	rockchip,camera-modules-attached = <&camera0>;
133 	cpu-supply = <&vdd_cpu>;
141 	center-supply = <&vdd_log>;
146 	vcc-supply = <&vdd10_lcd>;
147 	vccio-supply = <&vcc18_lcd>;
152 	compatible ="lg,lp079qx1-sp0v", "simple-panel";
154 	enable-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
155 	enable-delay-ms = <120>;
156 	pinctrl-0 = <&lcd_cs>;
157 	power-supply = <&vcc_lcd>;
160 	disp_timings: display-timings {
161 		native-mode = <&timing0>;
164 			clock-frequency = <200000000>;
167 			hfront-porch = <12>;
168 			hsync-len = <16>;
169 			hback-porch = <48>;
170 			vfront-porch = <8>;
171 			vsync-len = <4>;
172 			vback-porch = <8>;
173 			hsync-active = <0>;
174 			vsync-active = <0>;
175 			de-active = <0>;
176 			pixelclk-active = <0>;
183 	mali-supply = <&vdd_gpu>;
187 	clock-frequency = <400000>;
191 		fcs,suspend-voltage-selector = <1>;
193 		regulator-name = "vdd_cpu";
194 		regulator-min-microvolt = <850000>;
195 		regulator-max-microvolt = <1350000>;
196 		regulator-always-on;
197 		regulator-boot-on;
198 		regulator-enable-ramp-delay = <300>;
199 		regulator-ramp-delay = <8000>;
200 		vin-supply = <&vcc_sys>;
201 		regulator-state-mem {
202 			regulator-off-in-suspend;
208 		fcs,suspend-voltage-selector = <1>;
210 		regulator-name = "vdd_gpu";
211 		regulator-min-microvolt = <850000>;
212 		regulator-max-microvolt = <1350000>;
213 		regulator-always-on;
214 		regulator-ramp-delay = <6000>;
215 		vin-supply = <&vcc_sys>;
216 		regulator-state-mem {
217 			regulator-off-in-suspend;
225 		interrupt-parent = <&gpio0>;
228 		pinctrl-names = "default";
229 		pinctrl-0 = <&pmic_int>;
231 		#clock-cells = <0>;
232 		clock-output-names = "xin32k";
236 		compatible = "active-semi,act8846";
240 		vp1-supply = <&vcc_sys>;
241 		vp2-supply = <&vcc_sys>;
242 		vp3-supply = <&vcc_sys>;
243 		vp4-supply = <&vcc_sys>;
244 		inl1-supply = <&vcc_io>;
245 		inl2-supply = <&vcc_sys>;
246 		inl3-supply = <&vcc_20>;
250 				regulator-name = "VCC_DDR";
251 				regulator-min-microvolt = <1200000>;
252 				regulator-max-microvolt = <1200000>;
253 				regulator-always-on;
257 				regulator-name = "VCC_IO";
258 				regulator-min-microvolt = <3300000>;
259 				regulator-max-microvolt = <3300000>;
260 				regulator-always-on;
264 				regulator-name = "VDD_LOG";
265 				regulator-min-microvolt = <1150000>;
266 				regulator-max-microvolt = <1150000>;
267 				regulator-always-on;
271 				regulator-name = "VCC_20";
272 				regulator-min-microvolt = <2000000>;
273 				regulator-max-microvolt = <2000000>;
274 				regulator-always-on;
278 				regulator-name = "VCCIO_SD";
279 				regulator-min-microvolt = <1800000>;
280 				regulator-max-microvolt = <3300000>;
281 				regulator-always-on;
285 				regulator-name = "VDD10_LCD";
286 				regulator-min-microvolt = <1000000>;
287 				regulator-max-microvolt = <1000000>;
288 				regulator-always-on;
292 				regulator-name = "VCCA_CODEC";
293 				regulator-min-microvolt = <3300000>;
294 				regulator-max-microvolt = <3300000>;
295 				regulator-always-on;
299 				regulator-name = "VCCA_TP";
300 				regulator-min-microvolt = <3300000>;
301 				regulator-max-microvolt = <3300000>;
302 				regulator-always-on;
306 				regulator-name = "VCCIO_PMU";
307 				regulator-min-microvolt = <3300000>;
308 				regulator-max-microvolt = <3300000>;
309 				regulator-always-on;
313 				regulator-name = "VDD_10";
314 				regulator-min-microvolt = <1000000>;
315 				regulator-max-microvolt = <1000000>;
316 				regulator-always-on;
320 				regulator-name = "VCC_18";
321 				regulator-min-microvolt = <1800000>;
322 				regulator-max-microvolt = <1800000>;
323 				regulator-always-on;
327 				regulator-name = "VCC18_LCD";
328 				regulator-min-microvolt = <1800000>;
329 				regulator-max-microvolt = <1800000>;
330 				regulator-always-on;
338 	clock-frequency = <400000>;
343 		pinctrl-names = "default";
344 		pinctrl-0 = <&mpu6050_irq_gpio>;
346 		irq-gpio = <&gpio8 0 IRQ_TYPE_EDGE_RISING>;
347 		mpu-int_config = <0x10>;
348 		mpu-level_shifter = <0>;
349 		mpu-orientation = <0 1 0 1 0 0 0 0 1>;
350 		orientation-x= <0>;
351 		orientation-y= <1>;
352 		orientation-z= <0>;
353 		support-hw-poweroff = <1>;
354 		mpu-debug = <1>;
361 	camera0: camera-module@10 {
364 		compatible = "omnivision,ov8858-v4l2-i2c-subdev";
366 		device_type = "v4l2-i2c-subdev";
369 		clock-names = "clk_cif_out";
371 		pinctrl-names = "rockchip,camera_default",
373 		pinctrl-0 = <&cam0_default_pins>;
374 		pinctrl-1 = <&cam0_sleep_pins>;
376 		rockchip,pd-gpio = <&gpio2 15 GPIO_ACTIVE_LOW>;
377 		rockchip,pwr-gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
379 		rockchip,camera-module-mclk-name = "clk_cif_out";
380 		rockchip,camera-module-dovdd = "1.8v";
381 		rockchip,camera-module-facing = "back";
382 		rockchip,camera-module-name = "cmk-cb0695-fv1";
383 		rockchip,camera-module-len-name = "lg9569a2";
384 		rockchip,camera-module-fov-h = "66.0";
385 		rockchip,camera-module-fov-v = "50.1";
386 		rockchip,camera-module-orientation = <0>;
387 		rockchip,camera-module-iq-flip = <0>;
388 		rockchip,camera-module-iq-mirror = <0>;
389 		rockchip,camera-module-flip = <0>;
390 		rockchip,camera-module-mirror = <0>;
393 		rockchip,camera-module-defrect0 = <3264 2448 0 0 3264 2448>;
394 		rockchip,camera-module-flash-support = <0>;
395 		rockchip,camera-module-mipi-dphy-index = <0>;
419 	power-supply = <&vcc_lcd>;
444 		bl_en: bl-en {
456 		cam0_default_pins: cam0-default-pins {
461 		cam0_sleep_pins: cam0-sleep-pins {
469 		lcd_en: lcd-en  {
475 		wifi_pwr: wifi-pwr {
481 		mpu6050_irq_gpio: mpu6050-irq-gpio {