boot/dts/r7s9210-rza2mevb.dts

1 // SPDX-License-Identifier: GPL-2.0
9 /dts-v1/;
10 #include "r7s9210.dtsi"
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/input/input.h>
13 #include <dt-bindings/pinctrl/r7s9210-pinctrl.h>
17 	compatible = "renesas,rza2mevb", "renesas,r7s9210";
27 		stdout-path = "serial0:115200n8";
31 		compatible = "gpio-keys";
33 		pinctrl-names = "default";
34 		pinctrl-0 = <&keyboard_pins>;
36 		key-3 {
37 			interrupt-parent = <&irqc>;
41 			wakeup-source;
46 		#address-cells = <1>;
47 		#size-cells = <1>;
51 		compatible = "gpio-leds";
54 			gpios = <&pinctrl RZA2_PIN(PORT6, 0) GPIO_ACTIVE_HIGH>;
57 			gpios = <&pinctrl RZA2_PIN(PORTC, 1) GPIO_ACTIVE_HIGH>;
76 	pinctrl-names = "default";
77 	pinctrl-0 = <&eth0_pins>;
79 	renesas,no-ether-link;
80 	phy-handle = <&phy0>;
81 	phy0: ethernet-phy@0 {
87 	pinctrl-names = "default";
88 	pinctrl-0 = <&eth1_pins>;
90 	renesas,no-ether-link;
91 	phy-handle = <&phy1>;
92 	phy1: ethernet-phy@1 {
99 	clock-frequency = <24000000>;	/* 24MHz */
111 &pinctrl {
175 	clock-frequency = <32768>;
180 	pinctrl-names = "default";
181 	pinctrl-0 = <&scif4_pins>;
187 	pinctrl-names = "default";
188 	pinctrl-0 = <&sdhi0_pins>;
189 	bus-width = <4>;
194 	pinctrl-names = "default";
195 	pinctrl-0 = <&sdhi1_pins>;
196 	bus-width = <4>;
200 /* USB-0 as Host */
202 	pinctrl-names = "default";
203 	pinctrl-0 = <&usb0_pins>;
208 /* USB-1 as Host */
210 	pinctrl-names = "default";
211 	pinctrl-0 = <&usb1_pins>;
218 	clock-frequency = <48000000>;