Lines Matching +full:pinctrl +full:- +full:single
1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2014-2017 Phytec Messtechnik GmbH
8 #include <dt-bindings/input/input.h>
11 model = "Phytec AM335x PCM-953";
12 compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx";
16 compatible = "regulator-fixed";
17 regulator-name = "vcc3v3";
18 regulator-min-microvolt = <3300000>;
19 regulator-max-microvolt = <3300000>;
20 regulator-boot-on;
24 compatible = "regulator-fixed";
25 regulator-name = "vcc1v8";
26 regulator-min-microvolt = <1800000>;
27 regulator-max-microvolt = <1800000>;
28 regulator-boot-on;
33 compatible = "gpio-leds";
34 pinctrl-names = "default";
35 pinctrl-0 = <&user_leds_pins>;
37 user-led0 {
39 linux,default-trigger = "gpio";
40 default-state = "on";
43 user-led1 {
45 linux,default-trigger = "gpio";
46 default-state = "on";
51 compatible = "gpio-keys";
52 pinctrl-names = "default";
53 pinctrl-0 = <&user_buttons_pins>;
59 wakeup-source;
66 wakeup-source;
74 pinctrl-single,pins = <
81 pinctrl-single,pins = <
91 pinctrl-single,pins = <
99 pinctrl-names = "default";
100 pinctrl-0 = <&dcan1_pins>;
107 pinctrl-single,pins = <
125 phy-handle = <&phy1>;
126 phy-mode = "rgmii-id";
132 phy1: ethernet-phy@2 {
139 pinctrl-names = "default";
140 pinctrl-0 = <ðernet0_pins ðernet1_pins>;
146 pinctrl-names = "default";
147 pinctrl-0 = <&cb_gpio_pins>;
150 pinctrl-single,pins = <
160 pinctrl-single,pins = <
173 vmmc-supply = <&vcc3v3>;
174 bus-width = <4>;
175 pinctrl-names = "default";
176 pinctrl-0 = <&mmc1_pins>;
177 cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
184 pinctrl-single,pins = <
191 pinctrl-single,pins = <
200 pinctrl-single,pins = <
207 pinctrl-single,pins = <
215 pinctrl-names = "default";
216 pinctrl-0 = <&uart0_pins>;
221 pinctrl-names = "default";
222 pinctrl-0 = <&uart1_pins>;
226 pinctrl-names = "default";
227 pinctrl-0 = <&uart2_pins>;
232 pinctrl-names = "default";
233 pinctrl-0 = <&uart3_pins>;