sound/cards/audigy-mixer.rst

5 This is based on sb-live-mixer.rst.
20 functionality. Only the default build-in code in the ALSA driver is described
22 neutral position leaving the signal unchanged. Note that if the  same destination
34 	one-way three wire serial bus for digital sound by Philips Semiconductors
42 FX-bus
48 ----------------------------------------
49 This control is used to attenuate samples for left and right front PCM FX-bus
55 -------------------------------------------
56 This control is used to attenuate samples for left and right surround PCM FX-bus
62 -----------------------------------------
63 This control is used to attenuate samples for center PCM FX-bus accumulator.
68 --------------------------------------
69 This control is used to attenuate sample for LFE PCM FX-bus accumulator.
74 ----------------------------------
75 This control is used to attenuate samples for left and right PCM FX-bus
81 ---------------------------------
82 This control is used to attenuate samples for left and right PCM FX-bus
88 ------------------------------------
89 This control is used to attenuate samples for left and right MIDI FX-bus
94 -----------------------------------
95 These controls are used to attenuate samples for left and right MIDI FX-bus
101 ----------------------------------
105 capture FIFO (device 1 - 16bit/8KHz mono) too without volume control.
108 ---------------------------------
114 ----------------------------------------
120 ---------------------------------------
126 ---------------------------------------------
132 --------------------------------------------
138 ------------------------------------
144 -----------------------------------
150 -----------------------------------------
157 ----------------------------------------
163 -----------------------------------
169 ----------------------------------
175 ------------------------------------
181 ---------------------------------------
187 -------------------------------------
192 ----------------------------------
196 name='Tone Control - Switch',index=0
197 ------------------------------------
201 name='Tone Control - Bass',index=0
202 ----------------------------------
207 name='Tone Control - Treble',index=0
208 ------------------------------------
214 -------------------------------------
219 -------------------------------------------------
228 name='EMU10K1 PCM Volume',index 0-31
229 ------------------------------------
230 Channel volume attenuation in range 0-0xffff. The maximum value (no
234 * 0 - mono, default 0xffff (no attenuation)
235 * 1 - left, default 0xffff (no attenuation)
236 * 2 - right, default 0xffff (no attenuation)
238 name='EMU10K1 PCM Send Routing',index 0-31
239 ------------------------------------------
240 This control specifies the destination - FX-bus accumulators. There 24
243 * 0 -  mono, A destination (FX-bus 0-63), default 0
244 * 1 -  mono, B destination (FX-bus 0-63), default 1
245 * 2 -  mono, C destination (FX-bus 0-63), default 2
246 * 3 -  mono, D destination (FX-bus 0-63), default 3
247 * 4 -  mono, E destination (FX-bus 0-63), default 0
248 * 5 -  mono, F destination (FX-bus 0-63), default 0
249 * 6 -  mono, G destination (FX-bus 0-63), default 0
250 * 7 -  mono, H destination (FX-bus 0-63), default 0
251 * 8 -  left, A destination (FX-bus 0-63), default 0
252 * 9 -  left, B destination (FX-bus 0-63), default 1
253 * 10 -  left, C destination (FX-bus 0-63), default 2
254 * 11 -  left, D destination (FX-bus 0-63), default 3
255 * 12 -  left, E destination (FX-bus 0-63), default 0
256 * 13 -  left, F destination (FX-bus 0-63), default 0
257 * 14 -  left, G destination (FX-bus 0-63), default 0
258 * 15 -  left, H destination (FX-bus 0-63), default 0
259 * 16 - right, A destination (FX-bus 0-63), default 0
260 * 17 - right, B destination (FX-bus 0-63), default 1
261 * 18 - right, C destination (FX-bus 0-63), default 2
262 * 19 - right, D destination (FX-bus 0-63), default 3
263 * 20 - right, E destination (FX-bus 0-63), default 0
264 * 21 - right, F destination (FX-bus 0-63), default 0
265 * 22 - right, G destination (FX-bus 0-63), default 0
266 * 23 - right, H destination (FX-bus 0-63), default 0
268 Don't forget that it's illegal to assign a channel to the same FX-bus accumulator
271 name='EMU10K1 PCM Send Volume',index 0-31
272 -----------------------------------------
273 It specifies the attenuation (amount) for given destination in range 0-255.
276 *  0 -  mono, A destination attn, default 255 (no attenuation)
277 *  1 -  mono, B destination attn, default 255 (no attenuation)
278 *  2 -  mono, C destination attn, default 0 (mute)
279 *  3 -  mono, D destination attn, default 0 (mute)
280 *  4 -  mono, E destination attn, default 0 (mute)
281 *  5 -  mono, F destination attn, default 0 (mute)
282 *  6 -  mono, G destination attn, default 0 (mute)
283 *  7 -  mono, H destination attn, default 0 (mute)
284 *  8 -  left, A destination attn, default 255 (no attenuation)
285 *  9 -  left, B destination attn, default 0 (mute)
286 * 10 -  left, C destination attn, default 0 (mute)
287 * 11 -  left, D destination attn, default 0 (mute)
288 * 12 -  left, E destination attn, default 0 (mute)
289 * 13 -  left, F destination attn, default 0 (mute)
290 * 14 -  left, G destination attn, default 0 (mute)
291 * 15 -  left, H destination attn, default 0 (mute)
292 * 16 - right, A destination attn, default 0 (mute)
293 * 17 - right, B destination attn, default 255 (no attenuation)
294 * 18 - right, C destination attn, default 0 (mute)
295 * 19 - right, D destination attn, default 0 (mute)
296 * 20 - right, E destination attn, default 0 (mute)
297 * 21 - right, F destination attn, default 0 (mute)
298 * 22 - right, G destination attn, default 0 (mute)
299 * 23 - right, H destination attn, default 0 (mute)
307 -------------------------------------
316 	FX8010 - A DSP Chip Architecture for Audio Effects
320 ------------
335 -----------------------------------