Documentation/scsi/BusLogic.rst

107   reported for each target device, as well as the status of Tagged Queuing.
140     The status of Wide Negotiation, Disconnect/Reconnect, and Tagged Queuing
146   BusLogic SCSI Host Adapters directly implement SCSI-2 Tagged Queuing, and so
147   support has been included in the driver to utilize tagged queuing with any
148   target devices that report having the tagged queuing capability.  Tagged
149   queuing allows for multiple outstanding commands to be issued to each target
154   tagged queuing for each target device as well as individual selection of the
159   addition, tagged queuing is automatically disabled whenever the host adapter
161   queue depth of 1 is selected.  Tagged queuing is also disabled for individual
181   Finally, if tagged queuing is active and more than one command reset occurs
183   minutes of operation, then tagged queuing will be disabled for that target
450 The BusLogic Driver Tagged Queuing Options allow for explicitly specifying
451 the Queue Depth and whether Tagged Queuing is permitted for each Target
452 Device (assuming that the Target Device supports Tagged Queuing).  The Queue
455 that explicitly enabling Tagged Queuing may lead to problems; the option to
456 enable or disable Tagged Queuing is provided primarily to allow disabling
457 Tagged Queuing on Target Devices that do not implement it correctly.  The
463   Target Devices that support Tagged Queuing, as well as the maximum Queue
464   Depth for devices that do not support Tagged Queuing.  If no Queue Depth
471   do not support Tagged Queuing always have their Queue Depth set to
474   disables Tagged Queuing.
484   The "TaggedQueuing:Default" or "TQ:Default" option permits Tagged Queuing
486   whether the Queue Depth allows queuing multiple commands.
490   The "TaggedQueuing:Enable" or "TQ:Enable" option enables Tagged Queuing for
496   The "TaggedQueuing:Disable" or "TQ:Disable" option disables Tagged Queuing
502   Tagged Queuing individually for each Target Device.  <Target-Spec> is a
503   sequence of "Y", "N", and "X" characters.  "Y" enables Tagged Queuing, "N"
504   disables Tagged Queuing, and "X" accepts the default based on the firmware