Lines Matching full:eth0
751 A string (eth0, eth2, etc) specifying which slave is the
1089 BONDING_SLAVE0="eth0"
1125 "slave device" is either an interface name, e.g., "eth0", or a device
1205 for eth0 would be named /etc/sysconfig/network-scripts/ifcfg-eth0.
1208 DEVICE=eth0
1319 devices (presumed to be eth0 and eth1), and have it persist across
1326 ip link set eth0 master bond0
1466 To enslave interface eth0 to bond bond0::
1469 # echo +eth0 > /sys/class/net/bond0/bonding/slaves
1471 To free slave eth0 from bond bond0::
1473 # echo -eth0 > /sys/class/net/bond0/bonding/slaves
1477 /sys/class/net/bond0/slave_eth0 pointing to /sys/class/net/eth0, and
1478 /sys/class/net/eth0/master pointing to /sys/class/net/bond0.
1482 # echo -eth0 > /sys/class/net/eth0/master/bonding/slaves
1483 will free eth0 from whatever bond it is enslaved to, regardless of
1548 To make a simple bond of two e100 devices (presumed to be eth0
1558 echo +eth0 > /sys/class/net/bond0/bonding/slaves
1593 active-backup mode, with eth0 and eth1 as slaves::
1597 bond-slaves eth0 eth1
1600 bond-primary eth0 eth1
1613 auto eth0
1614 iface eth0 inet manual
1616 bond-primary eth0 eth1
1621 bond-primary eth0 eth1
1636 bonded interface in which eth0 connects to a private network, while eth1
1638 traffic over eth0 first, using eth1 only as a fall back, while all other traffic
1653 Currently Active Slave: eth0
1659 Slave Interface: eth0
1771 Currently Active Slave: eth0
1781 Slave Interface: eth0
1797 (MASTER) while eth0 and eth1 are slaves (SLAVE). Notice all slaves of
1809 eth0 Link encap:Ethernet HWaddr 00:C0:F0:1F:37:B4
1994 device bond0 has two slaves, eth0 and eth1, and the routing table is
1999 10.0.0.0 0.0.0.0 255.255.0.0 U 40 0 0 eth0
2007 case, another host on network 10 would use eth0 or eth1 before bond0).
2012 will arrive on a different interface (eth0). This reply looks to ARP
2036 alias eth0 tg3
2041 If neither eth0 and eth1 are slaves to bond0, then when the
2045 when the e1000 driver loads, it will receive eth0 and eth1 for its
2102 only one ipAdEntIfIndex for each IP address. For example, if eth0 and
2103 eth1 are slaves of bond0 and the driver for eth0 is loaded before the
2105 with the eth0 interface. This configuration is shown below, the IP
2106 address 192.168.1.1 has an interface index of 2 which indexes to eth0
2112 interfaces.ifTable.ifEntry.ifDescr.2 = eth0
2129 interfaces.ifTable.ifEntry.ifDescr.3 = eth0
2214 eth0 +-------+ eth1
2296 | |eth0 port1| | to other networks
2323 | |eth0 port1| +-------+ Host B |
2652 BladeCenter chassis, the eth0 port of all JS20 blades is hard wired to
2677 modules 1 and 2. In this configuration, the eth0 and eth1 ports of a
2683 switch. By using PMs in I/O module #1 and #2, the eth0 and eth1
2730 ethernet (eth0) only, therefore, any loss of link to eth0 will result
2851 from the bond (``ifenslave -d bond0 eth0``). The bonding driver will