Documentation/networking/arcnet-hardware.rst

263 Setting the Jumpers
488 	(IRQ Setting)		      IRQ2  IRQ3 IRQ4 IRQ5 IRQ7
507 				Setting		Value
515 				Setting		Value
531 				Setting		Value
550 				Setting		Value
634 Setting one of the switches to Off/Open means "1", On/Closed means "0".
637 Setting the Node ID
645 Setting the I/O Base Address
665 Setting the Base Memory (RAM) buffer Address
723 Setting the Timeouts and Interrupt
842 Setting one of the switches to Off/Open means "1", On/Closed means "0".
845 Setting the Node ID
886 Setting the I/O Base Address
929 Setting the Interrupt
952 Setting the Timeouts
1371 Setting one of the switches to Off means "1", On means "0".
1374 Setting the Node ID
1416 Setting the I/O Base Address
1436 Setting the Base Memory (RAM) buffer Address
1468 Setting the Interrupt Line
1483 Setting the Internal Terminator on CN120AB/TP/SBT
1516 Setting the Timeout Parameters
1582 Setting one of the switches to Off means "1", On means "0".
1585 Setting the Node ID
1625 Setting the I/O Base Address
1647 Setting the Base Memory (RAM) buffer Address
1666 Setting the Interrupt Line
1694 Setting the Timeout Parameters
1862 Setting the Node ID
1869 Setting one of the switches to OFF means "1", ON means "0".
1888 Setting the I/O Base Address
1909 Setting the Base Memory (RAM) buffer Address
1929 Setting the Interrupt Line
2005 Setting the Node ID
2012 Setting one of the switches to Off means "1", On means "0".
2029 Setting the I/O Base Address
2049 Setting the Base Memory (RAM) buffer Address
2077 Setting the Interrupt Line
2092 Setting the Timeout Parameters
2152 Setting the Node ID
2159 Setting one of the switches to Off means "1", On means "0".
2175 Setting the I/O Base Address
2195 Setting the Base Memory (RAM) buffer Address
2223 Setting the Interrupt Line
2239 Setting the Timeout Parameters
2504 Setting one of the switches to Off means "1", On means "0".
2507 Setting the Node ID
2548 Setting the I/O Base Address
2567 Setting the Base Memory (RAM) buffer Address
2625 Setting Interrupt Request Lines (IRQ)
2632 Setting the Timeouts
2700 Setting one of the switches to Off means "1", On means "0".
2703 Setting the Node ID
2744 Setting the I/O Base Address
2763 Setting the Base Memory (RAM) buffer Address
2816 Setting Interrupt Request Lines (IRQ)
2822 Setting the Timeouts
2879 Setting the jumpers to ON means connecting the upper two pins, off the bottom
2882 Setting the Node ID
2889 Setting one of the switches to Off means "1", On means "0".
2924 Setting the I/O Base Address
2944 Setting the Base Memory (RAM) buffer Address
2971 Setting the Interrupt Line
2986 Setting the Timeout Parameters
3062 Setting the I/O Base Address
3082 Setting the Base Memory Address (RAM & ROM)
3107 Setting the Node ID