Documentation/networking/arcnet-hardware.rst

390 	ON              OFF             Never happens (maybe when wrong ID)
624   S2	1-8:	Node ID Select
637 Setting the Node ID
640 The eight switches in group S2 are used to set the node ID.
754 	| node ID is zero               | I/O address
832   SW3	1-8:	Node ID Select
845 Setting the Node ID
848 The eight switches in group SW3 are used to set the node ID. Each node
849 attached to the network must have an unique node ID which must be
853 The node ID is the sum of the values of all switches set to "1"
870    8 7 6 5 4 3 2 1 | Node ID | Node ID
981 	| node ID is zero               | I/O address
1358   S2  1-8:    Node ID Select (ID0-ID7)
1374 Setting the Node ID
1377 The eight switches in SW2 are used to set the node ID. Each node attached
1378 to the network must have an unique node ID which must be different from 0.
1381 The node ID is the sum of the values of all switches set to "1"
1400    8 7 6 5 4 3 2 1 | Node ID | Node ID
1575   SW2 1-8:    Node ID Select (ID0-ID7)
1585 Setting the Node ID
1588 The eight switches in SW2 are used to set the node ID. Each node attached
1589 to the network must have an unique node ID which must be different from 0.
1592 The node ID is the sum of the values of all switches set to "1"
1609    8 7 6 5 4 3 2 1 | Node ID | Node ID
1775   SW 2  : Node ID (binary coded)
1852   SW2 1-8     Node ID Select (ID0-ID7)
1862 Setting the Node ID
1865 The eight switches in SW2 are used to set the node ID. Each node attached
1866 to the network must have an unique node ID which must not be 0.
1871 The node ID is the sum of the values of all switches set to "1"
1997   SW2 1-8:    Node ID Select
2005 Setting the Node ID
2008 The eight switches in SW3 are used to set the node ID. Each node attached
2009 to the network must have an unique node ID which must not be 0.
2014 The node ID is the sum of the values of all switches set to "1"
2114   | |SW2 NODE ID|  |                         |           | XTAL |       |
2143   SW2 1-8     Node ID Select (ID0-ID7)
2152 Setting the Node ID
2155 The eight switches in SW2 are used to set the node ID. Each node attached to
2156 the network must have an unique node ID which must not be 0.  Switch 1 (ID0)
2161 The node ID is the sum of the values of all switches set to "1"
2487    |___         2 3 4 5 7 E E R        Node ID       IOB__|__MEM____|
2494   S1  1-8:    Node ID Select
2507 Setting the Node ID
2510 The eight switches in group SW1 are used to set the node ID.
2511 Each node attached to the network must have an unique node ID which
2515 The node ID is the sum of the values of all switches set to "1"
2532    1 2 3 4 5 6 7 8 | Node ID | Node ID
2703 Setting the Node ID
2706 The eight switches in group SW2 are used to set the node ID.
2707 Each node attached to the network must have an unique node ID which
2711 The node ID is the sum of the values of all switches set to "1"
2728    1 2 3 4 5 6 7 8 | Node ID | Node ID
2869   SW2 1-8:    Node ID Select (ID0-ID7)
2882 Setting the Node ID
2885 The eight switches in SW2 are used to set the node ID. Each node attached
2886 to the network must have an unique node ID which must not be 0.
2891 The node ID is the sum of the values of all switches set to "1"
2908    8 7 6 5 4 3 2 1 | Node ID | Node ID
3042   SW3	1-8:	Node ID Select
3107 Setting the Node ID
3110 The eight switches in group SW3 are used to set the node ID.
3111 Each node attached to the network must have an unique node ID which
3116 The node ID is the sum of the values of all switches set to "1"
3133   8 7 6 5 4 3 2 1 | Node ID | Node ID