Lines Matching full:speed
100 There are 4 to 5 fan rotation speed sensors, 8 to 15 analog voltage sensors,
114 triggered if the rotation speed has dropped below a programmable limit. On
117 do not have a fan speed divider. The driver sets the most suitable fan divisor
118 itself; specifically, it increases the divider value each time a fan speed
119 reading returns an invalid value, and it reduces it if the fan speed reading
138 - this file stores PWM duty cycle or DC value (fan speed) in range:
140 0 (lowest speed) to 255 (full)
145 * 0 Fan control disabled (fans set to maximum speed)
148 * 3 "Fan Speed Cruise" mode
200 There are no changes to fan speed. Once the temperature leaves the interval, fan
201 speed increases (if temperature is higher that desired) or decreases (if
215 milliseconds before fan speed is increased
218 milliseconds before fan speed is decreased
225 Speed Cruise mode (3)
228 This modes tries to keep the fan speed constant.
231 Target fan speed
234 Target speed tolerance
242 This mode offers multiple slopes to control the fan speed. The slopes can be
248 critical temperature mode, in which the fans should run at full speed.
265 milliseconds before fan speed is increased
268 milliseconds before fan speed is decreased