Lines Matching full:temperature

27 inputs from thermal zone attributes (the current temperature and trip point
28 temperature) and throttle appropriate devices.
68 		get the current temperature of the thermal zone.
70 		    set the trip points window. Whenever the current temperature
72 		    current temperature are found.
86 			get the temperature above which the certain trip point
89 			set the emulation temperature which helps in debugging
90 			different threshold temperature points.
118 	pointed by dev->of_node as temperature providers. For the zone
132 			passed back, when a temperature reading is needed.
138 					sensor temperature. This is mandatory
141 					temperature window. When this window is
145 					sensor temperature trend.
147 					sensor emulated temperature.
150 	The thermal zone temperature is provided by the get_temp() function
207 	drivers for temperature calculations.
215 	drivers for temperature calculations.
382     |---temp:			Current temperature
386     |---trip_point_[0-*]_temp:	Trip point temperature
389     |---emul_temp:		Emulated temperature set node
391     |---k_po:                   Proportional term during temperature overshoot
392     |---k_pu:                   Proportional term during temperature undershoot
435     |---temp[1-*]_input:	The current temperature of thermal zone [1-*]
452 	Current temperature as reported by thermal zone (sensor).
482 	The temperature above which trip point will be fired.
526 	and can be set to a temperature (in millidegrees) to enable a
537 	Interface to set the emulated temperature method in thermal zone
538 	(sensor). After setting this temperature, the thermal zone may pass
539 	this temperature to platform emulation function if registered or
540 	cache it locally. This is useful in debugging different temperature
550 	    flooding this sysfs node with low temperature values.
563 	controller during temperature overshoot. Temperature overshoot
564 	is when the current temperature is above the "desired
565 	temperature" trip point. For more information see
572 	controller during temperature undershoot. Temperature undershoot
573 	is when the current temperature is below the "desired
574 	temperature" trip point. For more information see
595 	Temperature offset from the desired temperature trip point
599 	accumulates error when temperature is above the desired
600 	temperature trip point. For more information see
609 	to determine a hotspot temperature based off the sensor's
617 	to determine a hotspot temperature based off the sensor's
735 of temperature of the thermal zone. Ideally, the thermal sensor drivers
738 temperature values.
767 On an event of critical trip temperature crossing. Thermal framework