bindings/thermal/zx2967-thermal.txt

1 * ZTE zx2967 family Thermal
4 - compatible: should be one of the following.
5     * zte,zx296718-thermal
6 - reg: physical base address of the controller and length of memory mapped
8 - clocks : Pairs of phandle and specifier referencing the controller's clocks.
9 - clock-names: "topcrm" for the topcrm clock.
11 - #thermal-sensor-cells: must be 0.
13 Please note: slope coefficient defined in thermal-zones section need to be
19 		compatible = "zte,zx296718-thermal";
22 		clock-names = "topcrm", "apb";
23 		#thermal-sensor-cells = <0>;
29 		cluster0_cooling_dev: cluster0-cooling-dev {
30 			#cooling-cells = <2>;
35 	cluster1_cooling_dev: cluster1-cooling-dev {
36 			#cooling-cells = <2>;
42 Example for thermal zones:
44 	thermal-zones {
46 			polling-delay-passive = <500>;
47 			polling-delay = <1000>;
48 			sustainable-power = <6500>;
50 			thermal-sensors = <&tempsensor 0>;
54 			coefficients = <1951 (-922)>;
76 			cooling-maps {
79 					cooling-device = <&gpu 2 5>;
84 					cooling-device = <&cluster0_cooling_dev 1 2>;
89 					cooling-device = <&cluster0_cooling_dev 1 2>;
94 					cooling-device = <&cluster0_cooling_dev 1 2>;
99 					cooling-device = <&cluster1_cooling_dev 1 2>;
105 					cooling-device = <&cluster1_cooling_dev 1 2>;
111 					cooling-device = <&cluster1_cooling_dev 1 2>;