Lines Matching full:r5f

4 $id: http://devicetree.org/schemas/remoteproc/ti,k3-r5f-rproc.yaml#
7 title: TI K3 R5F processor subsystems
13   The TI K3 family of SoCs usually have one or more dual-core Arm Cortex R5F
20   Each Dual-Core R5F sub-system is represented as a single DTS node
22   the individual R5F cores. Each node has a number of required or optional
51       local R5F TCM address spaces to bus addresses.
60       Configuration Mode for the Dual R5F cores within the R5F cluster.
64 # R5F Processor Child Nodes:
68   "^r5f@[a-f0-9]+$":
71       The R5F Sub-System device node should define two R5F child nodes, each
72       node representing a TI instantiation of the Arm Cortex R5F core. There
77       Each R5F core has an associated 64 KB of Tightly-Coupled Memory (TCM)
82       either of them can be configured to appear at that R5F's address 0x0.
96           - ti,am654-r5f
97           - ti,j721e-r5f
120 # The following properties are mandatory for R5F Core0 in both LockStep and Split
121 # modes, and are mandatory for R5F Core1 _only_ in Split mode. They are unused for
122 # R5F Core1 in LockStep mode:
149 # The following properties are optional properties for each of the R5F cores:
155           R5F core configuration mode dictating if ATCM should be enabled. The
156           R5F address of ATCM is dictated by ti,loczrama property. Should be
164           R5F core configuration mode dictating if BTCM should be enabled. The
165           R5F address of BTCM is dictated by ti,loczrama property. Should be
173           R5F core configuration mode dictating which TCM should appear at
230                          <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
231                          <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
244                     mcu_r5f0: r5f@41000000 {
245                         compatible = "ti,am654-r5f";
263                     mcu_r5f1: r5f@41400000 {
264                         compatible = "ti,am654-r5f";