bindings/pinctrl/qcom%2Cipq6018-pinctrl.yaml

1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/pinctrl/qcom,ipq6018-pinctrl.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10   - Sricharan R <sricharan@codeaurora.org>
18     const: qcom,ipq6018-pinctrl
27   interrupt-controller: true
29   '#interrupt-cells':
32       include/dt-bindings/interrupt-controller/irq.h
35   gpio-controller: true
37   '#gpio-cells':
39       include/dt-bindings/gpio/gpio.h
42   gpio-ranges:
47   '-pinmux$':
52     $ref: "/schemas/pinctrl/pincfg-node.yaml"
61             - pattern: "^gpio([1-9]|[1-7][0-9]|80)$"
62             - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd,
99       drive-strength:
105       bias-pull-down: true
107       bias-pull-up: true
109       bias-disable: true
111       output-high: true
113       output-low: true
116       - pins
117       - function
122   - compatible
123   - reg
124   - interrupts
125   - interrupt-controller
126   - '#interrupt-cells'
127   - gpio-controller
128   - '#gpio-cells'
129   - gpio-ranges
134   - |
135         #include <dt-bindings/interrupt-controller/arm-gic.h>
137               compatible = "qcom,ipq6018-pinctrl";
140               interrupt-controller;
141               #interrupt-cells = <2>;
142               gpio-controller;
143               #gpio-cells = <2>;
144               gpio-ranges = <&tlmm 0 80>;
146               serial3-pinmux {
149                       drive-strength = <8>;
150                       bias-pull-down;