Lines Matching full:utmi

13    - The register set of the PHY containing the UTMI pad control registers.
14      Present if-and-only-if phy_type == utmi.
15  - phy_type : Should be one of "utmi", "ulpi" or "hsic".
21    - timer: The timeout clock (clk_m). Present if phy_type == utmi.
22    - utmi-pads: The clock needed to access the UTMI pad control registers.
23      Present if phy_type == utmi.
32    - utmi-pads: The reset of the PHY containing the chip-wide UTMI pad control
38 Required PHY timing params for utmi phy, for all chips:
53 Required PHY timing params for utmi phy, only on Tegra30 and above:
70   - nvidia,has-utmi-pad-registers : boolean indicates whether this controller
71     contains the UTMI pad control registers common to all USB controllers.