bindings/net/ftgmac100.txt

4 - compatible: "faraday,ftgmac100"
10      - "aspeed,ast2400-mac"
11      - "aspeed,ast2500-mac"
12      - "aspeed,ast2600-mac"
14 - reg: Address and length of the register set for the device
15 - interrupts: Should contain ethernet controller interrupt
18 - phy-mode: See ethernet.txt file in the same directory. If the property is
21 - use-ncsi: Use the NC-SI stack instead of an MDIO PHY. Currently assumes
22   rmii (100bT) but kept as a separate property in case NC-SI grows support
24 - no-hw-checksum: Used to disable HW checksum support. Here for backward
27 - clocks: In accordance with the generic clock bindings. Must describe the MAC
28   IP clock, and optionally an RMII RCLK gate for the AST2500/AST2600. The
30 - clock-names:
32       - "MACCLK": The MAC IP clock
33       - "RCLK": Clock gate for the RMII RCLK
38 		compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
41 		use-ncsi;