Lines Matching +full:led +full:- +full:8
6 ------ ---------------------------------
9 LM3633 Backlight, LED and fault monitor
14 - compatible: Should be one of:
20 - reg: I2C slave address.
28 - enable-gpios: A GPIO specifier for hardware enable pin.
29 - ramp-up-us: Current ramping from one brightness level to
31 Range from 2048 us - 117.44 s
32 - ramp-down-us: Current ramping from one brightness level to
34 Range from 2048 us - 117.44 s
35 - ti,brightness-resolution - This determines whether to use 8 bit brightness
38 8bit brightness mode per 7.3.4.1 of the data
40 node or as part of the LED child nodes. This
44 The values are 255 (8bit) or 2047 (11bit).
47 - backlight: All LMU devices have backlight child nodes.
51 - fault-monitor: Hardware fault monitoring driver for LM3633 and LM3697.
53 - compatible: Should be one of:
54 "ti,lm3633-fault-monitor"
55 - leds: LED properties for LM3633. Please refer to [2].
56 LED properties for LM36274. Please refer to [4].
57 - regulators: Regulator properties for LM3631 and LM3632.
60 [1] ../leds/backlight/ti-lmu-backlight.txt
61 [2] ../leds/leds-lm3633.txt
62 [3] ../regulator/lm363x-regulator.txt
63 [4] ../leds/leds-lm36274.txt
70 compatible = "ti,lm363x-regulator";
73 regulator-name = "lcd_boost";
74 regulator-min-microvolt = <4500000>;
75 regulator-max-microvolt = <6350000>;
76 regulator-always-on;
80 regulator-name = "lcd_vcont";
81 regulator-min-microvolt = <1800000>;
82 regulator-max-microvolt = <3300000>;
86 regulator-name = "lcd_voref";
87 regulator-min-microvolt = <4000000>;
88 regulator-max-microvolt = <6000000>;
92 regulator-name = "lcd_vpos";
93 regulator-min-microvolt = <4000000>;
94 regulator-max-microvolt = <6000000>;
95 regulator-boot-on;
99 regulator-name = "lcd_vneg";
100 regulator-min-microvolt = <4000000>;
101 regulator-max-microvolt = <6000000>;
102 regulator-boot-on;
107 compatible = "ti,lm3631-backlight";
110 led-sources = <0 1>;
111 ramp-up-us = <300000>;
120 enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>; /* PC2 */
123 compatible = "ti,lm363x-regulator";
125 enable-gpios = <&pioC 0 GPIO_ACTIVE_HIGH>,
129 regulator-name = "lcd_boost";
130 regulator-min-microvolt = <4500000>;
131 regulator-max-microvolt = <6400000>;
132 regulator-always-on;
136 regulator-name = "lcd_vpos";
137 regulator-min-microvolt = <4000000>;
138 regulator-max-microvolt = <6000000>;
142 regulator-name = "lcd_vneg";
143 regulator-min-microvolt = <4000000>;
144 regulator-max-microvolt = <6000000>;
149 compatible = "ti,lm3632-backlight";
152 pwm-names = "lmu-backlight";
155 led-sources = <0 1>;
156 pwm-period = <10000>;
165 enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
168 compatible = "ti,lm3633-backlight";
172 led-sources = <1 2>;
173 ramp-up-us = <500000>;
174 ramp-down-us = <500000>;
179 led-sources = <0>;
180 ramp-up-us = <1000000>;
181 ramp-down-us = <0>;
186 compatible = "ti,lm3633-leds";
190 led-sources = <1>;
191 led-max-microamp = <6000>;
196 led-sources = <3 4 5>;
197 led-max-microamp = <10000>;
201 fault-monitor {
202 compatible = "ti,lm3633-fault-monitor";
210 enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
213 compatible = "ti,lm3695-backlight";
217 led-sources = <0 1>;
224 #address-cells = <1>;
225 #size-cells = <0>;
228 enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
230 #address-cells = <1>;
231 #size-cells = <0>;
232 compatible = "ti,lm363x-regulator";
234 enable-gpios = <&pioC 0 GPIO_ACTIVE_HIGH>,
238 regulator-name = "lcd_boost";
239 regulator-min-microvolt = <4000000>;
240 regulator-max-microvolt = <7150000>;
241 regulator-always-on;
245 regulator-name = "lcd_vpos";
246 regulator-min-microvolt = <4000000>;
247 regulator-max-microvolt = <6500000>;
251 regulator-name = "lcd_vneg";
252 regulator-min-microvolt = <4000000>;
253 regulator-max-microvolt = <6500000>;
258 #address-cells = <1>;
259 #size-cells = <0>;
260 compatible = "ti,lm36274-backlight";
262 led@0 {
264 led-sources = <0 2>;
266 linux,default-trigger = "backlight";