bindings/mfd/rk816.txt

4 - compatible: "rockchip,rk816"
5 - reg: I2C slave address
6 - interrupt-parent: The parent interrupt controller.
7 - interrupts: the interrupt outputs of the controller.
8 - #clock-cells: from common clock binding; shall be set to 1 (multiple clock
12 - clock-output-names: From common clock binding to override the
14 - rockchip,system-power-controller: Telling whether or not this pmic is controlling
16 - gpio-controller: Specifies that the node is a gpio controller when you attempt to
18 - #gpio-cells: Should be two. The first cell is the GPIO number and the second cell
20 - wakeup-source: Flag to indicate this device can wake system (suspend/resume)
21 - vcc1-supply:  The input supply for DCDC_REG1
22 - vcc2-supply:  The input supply for DCDC_REG2
23 - vcc3-supply:  The input supply for DCDC_REG3
24 - vcc4-supply:  The input supply for DCDC_REG4
25 - vcc5-supply:  The input supply for LDO_REG1, LDO_REG2, LDO_REG3
26 - vcc6-supply:  The input supply for LDO_REG4, LDO_REG5, LDO_REG6
28 - regulator-initial-mode: default mode to set on startup
29 - regulator-initial-mode is set as:
36 	regulator-name {
44 	- DCDC_REGn
45 		- valid values for n are 1 to 4.
46 	- LDO_REGn
47 		- valid values for n are 1 to 6.
73 		clock-output-names = "xin32k", "wifibt_32kin";
74 		interrupt-parent = <&gpio0>;
76 		pinctrl-names = "default";
77 		pinctrl-0 = <&pmic_int>;
78 		rockchip,system-power-controller;
79 		wakeup-source;
80 		#clock-cells = <1>;
81 		gpio-controller;
82 		#gpio-cells = <2>;
84 		vcc1-supply = <&vcc_sys>;
85 		vcc2-supply = <&vcc_sys>;
86 		vcc3-supply = <&vcc_sys>;
87 		vcc4-supply = <&vcc_sys>;
88 		vcc5-supply = <&vcc_sys>;
89 		vcc6-supply = <&vcc_sys>;
105 				regulator-name = "vdd_logic";
106 				regulator-always-on;
107 				regulator-boot-on;
108 				regulator-min-microvolt = <750000>;
109 				regulator-max-microvolt = <1450000>;
110 				regulator-ramp-delay = <6001>;
111 				regulator-initial-mode = <1>;
112 				regulator-state-mem {
113 					regulator-off-in-suspend;
117 				regulator-name = "vdd_gpu";
118 				regulator-always-on;
119 				regulator-boot-on;
120 				regulator-min-microvolt = <800000>;
121 				regulator-max-microvolt = <1250000>;
122 				regulator-ramp-delay = <6001>;
123 				regulator-initial-mode = <1>;
124 				regulator-state-mem {
125 					regulator-on-in-suspend;
126 					regulator-suspend-microvolt = <1000000>;
131 				regulator-always-on;
132 				regulator-boot-on;
133 				regulator-name = "vcc_ddr";
134 				regulator-initial-mode = <1>;
135 				regulator-state-mem {
136 					regulator-on-in-suspend;
141 				regulator-always-on;
142 				regulator-boot-on;
143 				regulator-min-microvolt = <3300000>;
144 				regulator-max-microvolt = <3300000>;
145 				regulator-name = "vcc33_io";
146 				regulator-initial-mode = <1>;
147 				regulator-state-mem {
148 					regulator-on-in-suspend;
149 					regulator-suspend-microvolt = <3300000>;
154 				regulator-always-on;
155 				regulator-boot-on;
156 				regulator-min-microvolt = <3300000>;
157 				regulator-max-microvolt = <3300000>;
158 				regulator-name = "vccio_pmu";
159 				regulator-state-mem {
160 					regulator-on-in-suspend;
161 					regulator-suspend-microvolt = <3300000>;
166 				regulator-always-on;
167 				regulator-boot-on;
168 				regulator-min-microvolt = <3300000>;
169 				regulator-max-microvolt = <3300000>;
170 				regulator-name = "vcc_tp";
171 				regulator-state-mem {
172 					regulator-off-in-suspend;
177 				regulator-always-on;
178 				regulator-boot-on;
179 				regulator-min-microvolt = <1000000>;
180 				regulator-max-microvolt = <1000000>;
181 				regulator-name = "vdd_10";
182 				regulator-state-mem {
183 					regulator-on-in-suspend;
184 					regulator-suspend-microvolt = <1000000>;
189 				regulator-always-on;
190 				regulator-boot-on;
191 				regulator-min-microvolt = <1800000>;
192 				regulator-max-microvolt = <1800000>;
193 				regulator-name = "vcc18_lcd";
194 				regulator-state-mem {
195 					regulator-on-in-suspend;
196 					regulator-suspend-microvolt = <1800000>;
201 				regulator-always-on;
202 				regulator-boot-on;
203 				regulator-min-microvolt = <1800000>;
204 				regulator-max-microvolt = <3300000>;
205 				regulator-name = "vccio_sd";
206 				regulator-state-mem {
207 					regulator-on-in-suspend;
208 					regulator-suspend-microvolt = <3300000>;
213 				regulator-always-on;
214 				regulator-boot-on;
215 				regulator-min-microvolt = <1000000>;
216 				regulator-max-microvolt = <1000000>;
217 				regulator-name = "vdd10_lcd";
218 				regulator-state-mem {
219 					regulator-on-in-suspend;
220 					regulator-suspend-microvolt = <1000000>;