bindings/mfd/rk808.txt

19   outputs). See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
28 - vcc1-supply:  The input supply for DCDC_REG1
29 - vcc2-supply:  The input supply for DCDC_REG2
30 - vcc3-supply:  The input supply for DCDC_REG3
31 - vcc4-supply:  The input supply for DCDC_REG4
32 - vcc5-supply:  The input supply for LDO_REG1 and LDO_REG2
33 - vcc6-supply:  The input supply for LDO_REG3
36 - vcc1-supply:  The input supply for DCDC_REG1
37 - vcc2-supply:  The input supply for DCDC_REG2
38 - vcc3-supply:  The input supply for DCDC_REG3
39 - vcc4-supply:  The input supply for DCDC_REG4
40 - vcc6-supply:  The input supply for LDO_REG1 and LDO_REG2
41 - vcc7-supply:  The input supply for LDO_REG3 and LDO_REG7
42 - vcc8-supply:  The input supply for SWITCH_REG1
43 - vcc9-supply:  The input supply for LDO_REG4 and LDO_REG5
44 - vcc10-supply: The input supply for LDO_REG6
45 - vcc11-supply: The input supply for LDO_REG8
46 - vcc12-supply: The input supply for SWITCH_REG2
48   for 2 host gpio's used for dvs. The format of the gpio specifier depends in
53 - vcc1-supply:  The input supply for DCDC_REG1
54 - vcc2-supply:  The input supply for DCDC_REG2
55 - vcc3-supply:  The input supply for DCDC_REG3
56 - vcc4-supply:  The input supply for DCDC_REG4
57 - vcc5-supply:  The input supply for LDO_REG1, LDO_REG2, LDO_REG3
58 - vcc6-supply:  The input supply for LDO_REG4, LDO_REG5, LDO_REG6
59 - vcc7-supply:  The input supply for LDO_REG7, LDO_REG8, LDO_REG9
62 - vcc8-supply:  The input supply for SWITCH_REG1
63 - vcc9-supply:  The input supply for DCDC_REG5, SWITCH_REG2
66 - vcc8-supply:  The input supply for BOOST
67 - vcc9-supply:  The input supply for OTG_SWITCH
70 - vcc1-supply:  The input supply for DCDC_REG1
71 - vcc2-supply:  The input supply for DCDC_REG2
72 - vcc3-supply:  The input supply for DCDC_REG3
73 - vcc4-supply:  The input supply for DCDC_REG4
74 - boost-supply: The input supply for DCDC_BOOST
75 - vcc6-supply:  The input supply for LDO_REG1 and LDO_REG2
76 - vcc7-supply:  The input supply for LDO_REG3, LDO_REG5 and LDO_REG7
77 - vcc8-supply:  The input supply for LDO_REG4, LDO_REG6 and LDO_REG8
78 - vcc9-supply:  The input supply for LDO_REG9 and SWITCH_REG
79 - h_5v-supply:  The input supply for HDMI_SWITCH
80 - usb-supply:   The input supply for OTG_SWITCH
95 		- valid values for n are 1 to 4.
97 		- valid values for n are 1 to 3
104 		- valid values for n are 1 to 4.
106 		- valid values for n are 1 to 8.
108 		- valid values for n are 1 to 2
115 		- valid values for n are 1 to 5 for RK809.
116 		- valid values for n are 1 to 4 for RK817.
118 		- valid values for n are 1 to 9 for RK809.
119 		- valid values for n are 1 to 9 for RK817.
121 		- valid values for n are 1 to 2 for RK809.
122 	- BOOST for RK817
123 	- OTG_SWITCH for RK817
130 		- valid values for n are 1 to 4.
132 		- valid values for n are 1 to 9.
137 It is necessary to configure three pins for both the RK809 and RK817, the three
140 	The gpio_slp pin is for controlling the pmic states, as below:
147 for more details