bindings/i3c/i3c.txt

27 - i2c-scl-hz: frequency of the SCL signal used for I2C transfers.
29 	      values of I2C devices described in the device tree to determine
30 	      the maximum I2C frequency.
32 I2C devices
35 Each I2C device connected to the bus should be described in a subnode. All
42   + first cell : still encoding the I2C address. 10 bit addressing is not
50 	bit[7:5]: I2C device index. Possible values
51 	* 0: I2C device has a 50 ns spike filter
52 	* 1: I2C device does not have a 50 ns spike filter but supports high
54 	* 2: I2C device does not have a 50 ns spike filter and is not tolerant
65 The I2C node unit-address should always match the first cell of the reg
79 I3C device has a static I2C address and we want to assign it a specific I3C
90   + first cell : encodes the static I2C address. Should be 0 if the device does
91 		 not have one (0 is not a valid I2C address).
120 		/* I2C device. */
126 		/* I3C device with a static I2C address. */
133 		 * I3C device without a static I2C address but requiring