bindings/clock/samsung%2Cs3c64xx-clock.txt

9 - compatible: should be one of the following.
10   - "samsung,s3c6400-clock" - controller compatible with S3C6400 SoC.
11   - "samsung,s3c6410-clock" - controller compatible with S3C6410 SoC.
13 - reg: physical base address of the controller and length of memory mapped
16 - #clock-cells: should be 1.
23 dt-bindings/clock/samsung,s3c64xx-clock.h header and can be used in device
30 clock-output-names:
31  - "fin_pll" - PLL input clock (xtal/extclk) - required,
32  - "xusbxti" - USB xtal - required,
33  - "iiscdclk0" - I2S0 codec clock - optional,
34  - "iiscdclk1" - I2S1 codec clock - optional,
35  - "iiscdclk2" - I2S2 codec clock - optional,
36  - "pcmcdclk0" - PCM0 codec clock - optional,
37  - "pcmcdclk1" - PCM1 codec clock - optional, only S3C6410.
41 	clock: clock-controller@7e00f000 {
42 		compatible = "samsung,s3c6410-clock";
44 		#clock-cells = <1>;
49 	fin_pll: clock-fin-pll {
50 		compatible = "fixed-clock";
51 		clock-output-names = "fin_pll";
52 		clock-frequency = <12000000>;
53 		#clock-cells = <0>;
56 	xusbxti: clock-xusbxti {
57 		compatible = "fixed-clock";
58 		clock-output-names = "xusbxti";
59 		clock-frequency = <48000000>;
60 		#clock-cells = <0>;
63 Example: UART controller node that consumes the clock generated by the clock
65   "clocks" and "clock-names" properties):
68 			compatible = "samsung,s3c6400-uart";
70 			interrupt-parent = <&vic1>;
72 			clock-names = "uart", "clk_uart_baud2",