Lines Matching full:scu
19 The scu node with the following properties shall be under the /firmware/ node.
23 - compatible: should be "fsl,imx-scu".
60 i.MX SCU Client Device Node:
63 Client nodes are maintained as children of the relevant IMX-SCU device node.
65 Power domain bindings based on SCU Message Protocol
68 This binding for the SCU power domain providers uses the generic power
73 "fsl,imx8qm-scu-pd",
74 "fsl,imx8qxp-scu-pd"
75 followed by "fsl,scu-pd"
78 SCU commands.
82 Clock bindings based on SCU Message Protocol
91 followed by "fsl,scu-clk"
103 Pinctrl bindings based on SCU Message Protocol
132 RTC bindings based on SCU Message Protocol
138 OCOTP bindings based on SCU Message Protocol
142 "fsl,imx8qm-scu-ocotp",
143 "fsl,imx8qxp-scu-ocotp".
152 Watchdog bindings based on SCU Message Protocol
162 SCU key bindings based on SCU Message Protocol
171 Thermal bindings based on SCU Message Protocol
194 scu {
195 compatible = "fsl,imx-scu";
210 compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
227 compatible = "fsl,imx8qxp-scu-ocotp";
237 compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd";
245 scu_key: scu-key {