Lines Matching +full:clock +full:- +full:mode

7 Contact:	linux-iio@vger.kernel.org
16 Contact:	linux-iio@vger.kernel.org
20 		Count mode for channel Y. Four count modes are available:
21 		normal, range limit, non-recycle, and modulo-n. The preset value
22 		for channel Y is used by the count mode where required.
36 		Non-recycle:
37 			Counter is disabled whenever a 24-bit count overflow or
38 			underflow takes place. The counter is re-enabled when a
42 		Modulo-N:
52 Contact:	linux-iio@vger.kernel.org
56 		Read-only attribute that indicates whether excessive noise is
57 		present at the channel Y count inputs in quadrature clock mode;
58 		irrelevant in non-quadrature clock mode.
62 Contact:	linux-iio@vger.kernel.org
71 Contact:	linux-iio@vger.kernel.org
75 		Configure channel Y counter for non-quadrature or quadrature
76 		clock mode. Selecting non-quadrature clock mode will disable
77 		synchronous load mode. In quadrature clock mode, the channel Y
79 		selects full-cycle, scale of 0.5 selects half-cycle, scale of
80 		0.25 selects quarter-cycle) processed by the channel Y counter.
82 		Non-quadrature:
86 			mode and B = 0 selecting Down Count mode.
90 			decoded for UP/DN clock.
94 Contact:	linux-iio@vger.kernel.org
104 Contact:	linux-iio@vger.kernel.org
109 		non-synchronous load mode.
113 Contact:	linux-iio@vger.kernel.org
117 		Configure channel Y counter for non-synchronous or synchronous
118 		load mode. Synchronous load mode cannot be selected in
119 		non-quadrature clock mode.
121 		Non-synchronous:
129 			quadrature clock mode. The active level is configured
132 			the quadrature clock on the active level of the index