Lines Matching full:hardware

3   This file describes how to add hardware cursor support to a chipset
24    The driver informs the ramdac module of it's hardware cursor capablities by
55     LoadCursorImage is how the hardware cursor bits computed by the
67     provide this function if the hardware cursor format is not one of
73     If the driver is unable to use a hardware cursor for reasons
78     mode changes.  This is useful for when the hardware cursor cannot
87     These indicate the largest sized cursor that can be a hardware
118    the LoadCursorImage entry is to be called to load a new hardware cursor
124    Hardware cursor data consists of two pieces, a source and a mask.
134    and clear bits indicate the transparent part.  If your hardware
140    the mask.  If the hardware needs this order reversed then this
147    aren't set.  Some hardware will not care if source bits are set where
148    there are supposed to be transparent areas, but some hardware will
150    hardware will need this flag set.
155    corresponds to the leftmost pixel on the screen.  If your hardware
160    If your hardware requires byte swapping of the hardware cursor, enable
167    the HARDWARE_CURSOR_SWAP_SOURCE_AND_MASK flag is set).  Some hardware
185    And once again, if your hardware requires something different than