Lines Matching full:160

224 /* pass a 160MHz center channel to get 20MHz subband channel numbers */
255  * (works with 20, 40, 80, 160, 80p80)
265  * (works with 20, 40, 80, 160, 80p80)
284  * (works with 20, 40, 80, 160, 80p80)
324  * (works with 20, 40, 80, 160, 80p80)
332  * (works with 20, 40, 80, 160, 80p80)
363 #define IS_CTL_IN_L80(chspec) !((chspec) & WL_CHANSPEC_CTL_SB_ULL)	/* in low 80 of 80p80/160 */
403 * as simple numeric comparisons, with the exception that 160 is the same BW as 80+80,
406 * The LT/LE/GT/GE macros check first checks whether both chspec bandwidth and bw are 160 wide.
407 * If both chspec bandwidth and bw is not 160 wide, then the comparison is made.
514  * Bandwidth of 160 MHz will be returned for 80+80MHz chanspecs.
613  *         "5", "10", "20", "40", "80", "160", "80+80"
771  * Returns the chanspec for the primary 80MHz sub-band of an 160MHz or 80+80 channel
782  * Returns the chanspec for the secondary 80MHz sub-band of an 160MHz or 80+80 channel
794  * For 160MHz or 80P80 chanspec, set ch[0]/ch[1] to be the low/high 80 Mhz channels
815  * Works with 20, 40, 80, 80p80 and 160MHz chspec