355 	sd_info(("%s:sd->mem_space = %p\n", __FUNCTION__, sd->mem_space));  in sdioh_attach()
374 		sd_info(("driver_init failed - Reset RCA and try again\n"));  in sdioh_attach()
747 			sd_info(("SD Clock turned ON.\n"));  in sdioh_iovar_op()
757 			sd_info(("SD Clock turned OFF.\n"));  in sdioh_iovar_op()
1369 	sd_info(("%s: CMD14 OK: cmd_resp:0x%x\n", __FUNCTION__, rsp1));  in sdioh_sleep()
1664 	sd_info(("%s: ErrorIntrStatus 0x%04x (clearing), IntrStatus 0x%04x PresentState 0x%08x\n",  in sdstd_check_errs()
1856 		sd_info(("%s: Found Arasan Standard SDIO Host Controller\n", __FUNCTION__));  in sdstd_host_init()
1862 		sd_info(("%s: Found Cypress 27xx Standard SDIO Host Controller\n", __FUNCTION__));  in sdstd_host_init()
1866 		sd_info(("%s: Found Broadcom 27xx Standard SDIO Host Controller\n", __FUNCTION__));  in sdstd_host_init()
1870 		sd_info(("%s: Found TI PCIxx21 Standard SDIO Host Controller\n", __FUNCTION__));  in sdstd_host_init()
1874 		sd_info(("%s: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter\n",  in sdstd_host_init()
1879 		sd_info(("%s: JMicron Standard SDIO Host Controller\n",  in sdstd_host_init()
1953 			sd_info(("%s: SDIO slot %d: Full\n", __FUNCTION__, slot));  in sdstd_host_init()
1957 			sd_info(("%s: SDIO slot %d: Empty\n", __FUNCTION__, slot));  in sdstd_host_init()
2022 	sd_info(("%s: caps: 0x%x; MCCap:0x%x\n", __FUNCTION__, sd->caps, sd->curr_caps));  in sdstd_host_init()
2055 		sd_info(("%s: HCtrl: 0x%x; HCtrl2:0x%x\n", __FUNCTION__, reg8, reg16));  in sdstd_host_init()
2203 		sd_info(("RCA is 0x%x\n", sd->card_rca));  in sdstd_client_init()
2297 	sd_info(("%s: Enter\n", __FUNCTION__));  in sdstd_3_clock_wrapper()
2341 		sd_info(("%s: Legacy Mode Clock\n", __FUNCTION__));  in sdstd_3_clock_wrapper()
2365 		sd_info(("%s: Tuning NOT reqd!\n", __FUNCTION__));  in sdstd_3_clk_tuning()
2460 	sd_info(("Phase passed info: 0x%x\n", (val2>>8)& 0x3F));  in sdstd_3_clk_tuning()
2461 	sd_info(("Phase selected post tune: 0x%x\n", phase_info_local));  in sdstd_3_clk_tuning()
2479 	sd_info(("%s: TUNING Success!\n", __FUNCTION__));  in sdstd_3_clk_tuning()
2574 	sd_info(("Attempting to change BSS.current val:0x%x\n", regdata));  in sdstd_3_set_highspeed_uhsi_mode()
2577 		sd_info(("Device supports High-Speed mode.\n"));  in sdstd_3_set_highspeed_uhsi_mode()
2583 		sd_info(("Writing %08x to Card at %08x\n",  in sdstd_3_set_highspeed_uhsi_mode()
2597 		sd_info(("Read %08x from Card at %08x\n", regdata, SDIOD_CCCR_SPEED_CONTROL));  in sdstd_3_set_highspeed_uhsi_mode()
2866 	sd_info(("%s:Read %08x from Card at %08x\n", __FUNCTION__,  in sdstd_3_get_matching_uhsi_clkmode()
3007 		sd_info(("Attempting to enable High-Speed mode.\n"));  in sdstd_set_highspeed_mode()
3014 			sd_info(("Device supports High-Speed mode.\n"));  in sdstd_set_highspeed_mode()
3018 			sd_info(("Writing %08x to Card at %08x\n",  in sdstd_set_highspeed_mode()
3030 			sd_info(("Read %08x to Card at %08x\n", regdata, SDIOD_CCCR_SPEED_CONTROL));  in sdstd_set_highspeed_mode()
3191 	sd_info(("Clock control is 0x%x\n", sdstd_rreg16(sd, SD_ClockCntrl)));  in sdstd_start_clock()
3214 	sd_info(("Primary Clock Freq = %d MHz\n", GFIELD(sd->caps, CAP_BASECLK)));  in sdstd_start_clock()
3216 		sd_info(("%s: Resulting SDIO clock is %d %s\n", __FUNCTION__,  in sdstd_start_clock()
3220 		sd_info(("%s: Resulting SDIO clock is %d %s\n", __FUNCTION__,  in sdstd_start_clock()
3224 		sd_info(("%s: Resulting SDIO clock is %d %s\n", __FUNCTION__,  in sdstd_start_clock()
3228 		sd_info(("%s: Resulting SDIO clock is %d %s\n", __FUNCTION__,  in sdstd_start_clock()
3232 		sd_info(("%s: Resulting SDIO clock is %d %s\n", __FUNCTION__,  in sdstd_start_clock()
3250 		sd_info(("Waiting for clock to become stable 0x%x\n", rc));  in sdstd_start_clock()
3288 		sd_info(("%s: REsetting err int control\n", __FUNCTION__));  in sdstd_start_clock()
3295 	sd_info(("Final Clock control is 0x%x\n", sdstd_rreg16(sd, SD_ClockCntrl)));  in sdstd_start_clock()
3324 	sd_info(("Turning off VDD/bus power briefly (100ms) to ensure reset\n"));  in sdstd_start_power()
3376 	sd_info(("Setting Bus Power to %s Volts\n", s));  in sdstd_start_power()
3394 	sd_info(("%s:baseclk: %d MHz\n",	__FUNCTION__, baseclk));  in sdstd_start_power()
3441 	sd_info(("cmd_rsp = 0x%x\n", cmd_rsp));  in sdstd_start_power()
3442 	sd_info(("mem_present = %d\n", GFIELD(cmd_rsp, RSP4_MEM_PRESENT)));  in sdstd_start_power()
3443 	sd_info(("num_funcs = %d\n", GFIELD(cmd_rsp, RSP4_NUM_FUNCS)));  in sdstd_start_power()
3444 	sd_info(("card_ready = %d\n", GFIELD(cmd_rsp, RSP4_CARD_READY)));  in sdstd_start_power()
3445 	sd_info(("OCR = 0x%x\n", GFIELD(cmd_rsp, RSP4_IO_OCR)));  in sdstd_start_power()
3462 	sd_info(("Leaving bus power at 3.3 Volts\n"));  in sdstd_start_power()
3472 	sd_info(("OCR = 0x%x\n", GFIELD(cmd_rsp, RSP4_IO_OCR)));  in sdstd_start_power()
3500 				sd_info(("%s: Not sdio3.0: host_UHSISupported: %d; HC volts=%d\n",  in sdstd_start_power()
3504 		sd_info(("%s: Legacy [non sdio3.0] HC\n", __FUNCTION__));  in sdstd_start_power()
3519 		sd_info(("%s: Already at width %d\n", __FUNCTION__, new_mode));  in sdstd_bus_width()
3528 		sd_info(("Changing to SD4 Mode\n"));  in sdstd_bus_width()
3531 		sd_info(("Changing to SD1 Mode\n"));  in sdstd_bus_width()
3662 	sd_info(("%s: Card's Common CIS Ptr = 0x%x\n", __FUNCTION__, sd->com_cis_ptr));  in sdstd_card_enablefuncs()
3668 		sd_info(("%s: Function %d CIS Ptr = 0x%x\n",  in sdstd_card_enablefuncs()