395 	sd_info(("%s:sd->mem_space = %p\n", __FUNCTION__, sd->mem_space));  in sdioh_attach()
415 		sd_info(("driver_init failed - Reset RCA and try again\n"));  in sdioh_attach()
810 			sd_info(("SD Clock turned ON.\n"));  in sdioh_iovar_op()
820 			sd_info(("SD Clock turned OFF.\n"));  in sdioh_iovar_op()
1481 	sd_info(("%s: CMD14 OK: cmd_resp:0x%x\n", __FUNCTION__, rsp1));  in sdioh_sleep()
1772 	sd_info(("%s: ErrorIntrStatus 0x%04x (clearing), IntrStatus 0x%04x PresentState 0x%08x\n",  in sdstd_check_errs()
1968 		sd_info(("%s: Found Arasan Standard SDIO Host Controller\n", __FUNCTION__));  in sdstd_host_init()
1974 		sd_info(("%s: Found Broadcom 27xx Standard SDIO Host Controller\n", __FUNCTION__));  in sdstd_host_init()
1978 		sd_info(("%s: Found TI PCIxx21 Standard SDIO Host Controller\n", __FUNCTION__));  in sdstd_host_init()
1982 		sd_info(("%s: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter\n",  in sdstd_host_init()
1987 		sd_info(("%s: JMicron Standard SDIO Host Controller\n",  in sdstd_host_init()
1993 		sd_info(("%s: Found Jinvani Standard SDIO Host Controller\n", __FUNCTION__));  in sdstd_host_init()
2063 			sd_info(("%s: SDIO slot %d: Full\n", __FUNCTION__, slot));  in sdstd_host_init()
2067 			sd_info(("%s: SDIO slot %d: Empty\n", __FUNCTION__, slot));  in sdstd_host_init()
2126 	sd_info(("%s: caps: 0x%x; MCCap:0x%x\n", __FUNCTION__, sd->caps, sd->curr_caps));  in sdstd_host_init()
2137 		sd_info(("SD HOST CAPS: Max block size is INVALID\n"));  in sdstd_host_init()
2139 		sd_info(("SD HOST CAPS: Max block size is %d bytes\n",  in sdstd_host_init()
2143 	sd_info(("SD HOST CAPS: 64-bit DMA is %ssupported.\n",  in sdstd_host_init()
2145 	sd_info(("SD HOST CAPS: Suspend/Resume is %ssupported.\n",  in sdstd_host_init()
2200 		sd_info(("%s: HCtrl: 0x%x; HCtrl2:0x%x\n", __FUNCTION__, reg8, reg16));  in sdstd_host_init()
2356 		sd_info(("RCA is 0x%x\n", sd->card_rca));  in sdstd_client_init()
2451 	sd_info(("%s: Enter\n", __FUNCTION__));  in sdstd_3_clock_wrapper()
2495 		sd_info(("%s: Legacy Mode Clock\n", __FUNCTION__));  in sdstd_3_clock_wrapper()
2519 		sd_info(("%s: Tuning NOT reqd!\n", __FUNCTION__));  in sdstd_3_clk_tuning()
2614 	sd_info(("Phase passed info: 0x%x\n", (val2>>8)& 0x3F));  in sdstd_3_clk_tuning()
2615 	sd_info(("Phase selected post tune: 0x%x\n", phase_info_local));  in sdstd_3_clk_tuning()
2633 	sd_info(("%s: TUNING Success!\n", __FUNCTION__));  in sdstd_3_clk_tuning()
2728 	sd_info(("Attempting to change BSS.current val:0x%x\n", regdata));  in sdstd_3_set_highspeed_uhsi_mode()
2731 		sd_info(("Device supports High-Speed mode.\n"));  in sdstd_3_set_highspeed_uhsi_mode()
2737 		sd_info(("Writing %08x to Card at %08x\n",  in sdstd_3_set_highspeed_uhsi_mode()
2751 		sd_info(("Read %08x from Card at %08x\n", regdata, SDIOD_CCCR_SPEED_CONTROL));  in sdstd_3_set_highspeed_uhsi_mode()
3020 	sd_info(("%s:Read %08x from Card at %08x\n", __FUNCTION__,  in sdstd_3_get_matching_uhsi_clkmode()
3162 		sd_info(("Attempting to enable High-Speed mode.\n"));  in sdstd_set_highspeed_mode()
3169 			sd_info(("Device supports High-Speed mode.\n"));  in sdstd_set_highspeed_mode()
3173 			sd_info(("Writing %08x to Card at %08x\n",  in sdstd_set_highspeed_mode()
3185 			sd_info(("Read %08x to Card at %08x\n", regdata, SDIOD_CCCR_SPEED_CONTROL));  in sdstd_set_highspeed_mode()
3516 	sd_info(("Clock control is 0x%x\n", sdstd_rreg16(sd, SD_ClockCntrl)));  in sdstd_start_clock()
3539 	sd_info(("Primary Clock Freq = %d MHz\n", GFIELD(sd->caps, CAP_BASECLK)));  in sdstd_start_clock()
3541 		sd_info(("%s: Resulting SDIO clock is %d %s\n", __FUNCTION__,  in sdstd_start_clock()
3545 		sd_info(("%s: Resulting SDIO clock is %d %s\n", __FUNCTION__,  in sdstd_start_clock()
3549 		sd_info(("%s: Resulting SDIO clock is %d %s\n", __FUNCTION__,  in sdstd_start_clock()
3553 		sd_info(("%s: Resulting SDIO clock is %d %s\n", __FUNCTION__,  in sdstd_start_clock()
3557 		sd_info(("%s: Resulting SDIO clock is %d %s\n", __FUNCTION__,  in sdstd_start_clock()
3576 		sd_info(("Waiting for clock to become stable 0x%x\n", rc));  in sdstd_start_clock()
3614 		sd_info(("%s: REsetting err int control\n", __FUNCTION__));  in sdstd_start_clock()
3622 	sd_info(("Final Clock control is 0x%x\n", sdstd_rreg16(sd, SD_ClockCntrl)));  in sdstd_start_clock()
3662 	sd_info(("Turning off VDD/bus power briefly (100ms) to ensure reset\n"));  in sdstd_start_power()
3721 	sd_info(("Setting Bus Power to %s Volts\n", s));  in sdstd_start_power()
3744 	sd_info(("%s:baseclk: %d MHz\n",	__FUNCTION__, baseclk));  in sdstd_start_power()
3791 	sd_info(("cmd_rsp = 0x%x\n", cmd_rsp));  in sdstd_start_power()
3792 	sd_info(("mem_present = %d\n", GFIELD(cmd_rsp, RSP4_MEM_PRESENT)));  in sdstd_start_power()
3793 	sd_info(("num_funcs = %d\n", GFIELD(cmd_rsp, RSP4_NUM_FUNCS)));  in sdstd_start_power()
3794 	sd_info(("card_ready = %d\n", GFIELD(cmd_rsp, RSP4_CARD_READY)));  in sdstd_start_power()
3795 	sd_info(("OCR = 0x%x\n", GFIELD(cmd_rsp, RSP4_IO_OCR)));  in sdstd_start_power()
3813 	sd_info(("Leaving bus power at 3.3 Volts\n"));  in sdstd_start_power()
3823 	sd_info(("OCR = 0x%x\n", GFIELD(cmd_rsp, RSP4_IO_OCR)));  in sdstd_start_power()
3851 				sd_info(("%s: Not sdio3.0: host_UHSISupported: %d; HC volts=%d\n",  in sdstd_start_power()
3855 		sd_info(("%s: Legacy [non sdio3.0] HC\n", __FUNCTION__));  in sdstd_start_power()
3870 		sd_info(("%s: Already at width %d\n", __FUNCTION__, new_mode));  in sdstd_bus_width()
3879 		sd_info(("Changing to SD4 Mode\n"));  in sdstd_bus_width()
3882 		sd_info(("Changing to SD1 Mode\n"));  in sdstd_bus_width()
4013 	sd_info(("%s: Card's Common CIS Ptr = 0x%x\n", __FUNCTION__, sd->com_cis_ptr));  in sdstd_card_enablefuncs()
4019 		sd_info(("%s: Function %d CIS Ptr = 0x%x\n",  in sdstd_card_enablefuncs()