Lines Matching refs:u
257 bool "u-boot.ais"
261 u-boot.ais contains U-Boot with the SPL support.
264 bool "u-boot.bin"
268 bool "u-boot.dtb"
271 bool "u-boot-dtb.bin"
274 bool "u-boot-nand.bin"
277 bool "u-boot.elf"
280 bool "u-boot.img"
283 bool "u-boot-dtb.img"
286 bool "u-boot.imx"
289 bool "u-boot-dtb.imx"
292 bool "u-boot.itb"
295 bool "u-boot.kwb (Marvell)"
299 bool "u-boot.nand (Freescale i.MX28)"
312 'u-boot.nand' needs to written.
314 applies after 'u-boot.nand' was correctly written. There is no
316 be upgraded by writing 'u-boot.sb'.
318 To satisfy both cases, the 'u-boot.nand' image obtained from
319 mxsboot as well as the U-Boot make target 'u-boot.sb' are
356 bool "u-boot.sb (Freescale i.MX28)"
360 bool "u-boot.sd (Freescale i.MX28)"
372 bool "u-boot.stm32"
379 u-boot.bin, but u-boot<something>.bin. If this is your case,
392 u-boot_magic.bin
402 Use gpsign to produce an image of u-boot.bin signed with
411 https://github.com/nmenon/omap-u-boot-utils/blob/master/README
422 The omap-u-boot-utils software contains example
424 https://github.com/nmenon/omap-u-boot-utils/tree/master/configs
436 external memory (DDR), and load the u-boot program
441 default "spl/u-boot-spl.bin"
445 u-boot build. For most platform SPL name is spl/u-boot-spl.bin
446 and TPL name is tpl/u-boot-tpl.bin but not always. SPL name is
458 for u-boot-dtb.img file so this U-Boot format is required
559 Otherwise the full u-boot-dtb.bin is converted using