Lines Matching +full:mode +full:- +full:loader

11   - imx6sl-warp.dtb
12   - rootfs.ext4
13   - rootfs.tar
14   - sdcard.img
15   - u-boot.imx
16   - zImage
21 - Put warpboard in USB download mode by closing the j2 jumper on the
24 - Load u-boot.imx in the WarpBoard by using the imx-usb-loader host utility:
26   $ ./output/host/bin/imx_usb -c output/host/etc/imx-loader.d/ output/images/u-boot.imx
28 - U-Boot will appear in minicom
30 - Reset the U-Boot environment to its default:
31  => env default -f -a
34 - Run the DFU command in U-Boot:
37 - Transfer U-Boot into flash by running this command in host side:
39  $ sudo ./output/host/bin/dfu-util -D output/images/u-boot.imx -a boot
41 - remove power and put the WarpBoard back into normal boot mode by
47 Run the 'ums' command from the U-Boot prompt to mount the eMMC as USB mass
54   dd if=output/images/sdcard.img of=/dev/<your-sd-device>
73 # wpa_supplicant -Dwext -iwlan0 -c /etc/wpa.conf &
74 # udhcpc -i wlan0