Lines Matching +full:nxp +full:- +full:imx

5 This file documents the Buildroot support for the NXP i.MX8QM MEK board.
7 You will find a reference to the board on nxp.com:
8 https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-8quadmax-…
11 https://www.nxp.com/document/guide/get-started-with-the-i.mx-8quadmax-mek:GS-iMX-8QM-MEK
25   - ahab-container.img
26   - bl31.bin
27   - boot.vfat
28   - fsl-imx8qm-mek.dtb
29   - Image
30   - imx8-boot-sd.bin
31   - mkimg.commit
32   - mx8qm-mek-scfw-tcm.bin
33   - mx8qm-val-scfw-tcm.bin
34   - mx8qm-a0-ddr4-scfw-tcm.bin
35   - mx8qm-a0-mek-scfw-tcm.bin
36   - mx8qm-a0-val-scfw-tcm.bin
37   - mx8qm-ddr4-scfw-tcm.bin
38   - rootfs.ext2
39   - rootfs.ext4
40   - rootfs.tar
41   - sdcard.img
42   - u-boot-atf.bin
43   - u-boot.bin
44   - u-boot-hash.bin
58   dd if=output/images/sdcard.img of=/dev/<your-sd-device>
63 board/freescale/common/imx/genimage.cfg.template_imx8.
69 - insert the SD card in the SD slot of the board;
70 - Configure the boot switch as follows:
72 - put a micro USB cable into the Debug USB Port and connect using a terminal
74 - power on the board.