Lines Matching +full:imx8mq +full:- +full:reset
26 - bl31.bin
27 - boot.vfat
28 - fsl-imx8mq-evk.dtb
29 - Image
30 - imx8-boot-sd.bin
31 - lpddr4_pmu_train_fw.bin
32 - rootfs.ext2
33 - rootfs.ext4
34 - rootfs.tar
35 - sdcard.img
36 - signed_hdmi_imx8m.bin
37 - u-boot.bin
38 - u-boot.imx
39 - u-boot-nodtb.bin
40 - u-boot-spl-ddr.bin
54 dd if=output/images/sdcard.img of=/dev/<your-sd-device>
65 - insert the SD card in the SD slot of the board;
66 - Configure the switches as follows:
69 - put a micro USB cable into the Debug USB Port and connect using a terminal
71 - power on the board.
77 argument. To set the video boot argument from U-Boot run after
78 stopping in U-Boot prompt:
80 setenv mmcargs 'setenv bootargs console=${console} root=${mmcroot} video=HDMI-A-1:1920x1080-32@60'
82 reset