arm/juno/readme.txt

1 ARM Juno r1/r0
6 These instructions apply to all models of the ARM Juno:
7   - Juno r0 (does not support PCIe)
8   - Juno r1 (supports PCIe)
9   - Juno r2 (Big Cluster with A72)
43     +-- juno.dtb (if Juno r0 is used)
44     +-- juno-r1.dtb (if Juno r1 is used)
45     +-- juno-r2.dtb (if Juno r2 is used)
80 Insert the pen drive in one of the ARM Juno' USB type A connectors.
82 Configure *.dtb in the boot configuration for Juno r0
89 NOR3FILE: \SOFTWARE\juno.dtb     ;Image File Name
95 Configure *.dtb in the boot configuration for Juno r1
102 NOR3FILE: \SOFTWARE\juno-r1.dtb  ;Image File Name
108 Configure *.dtb in the boot configuration for Juno r2
115 NOR3FILE: \SOFTWARE\juno-r2.dtb  ;Image File Name
124 1. Connect to the ARM Juno UART0 and execute USB_ON in the terminal
125 2. Connect a USB cable between your PC and ARM Juno USB type B connector
129 5. Copy the 'juno-r1.dtb' (r1), 'juno.dtb' (r0) or juno-r2.dtb (r2) file to software/
131 7. Press the red button in the front pannel of ARM Juno