tools: gitignore: Add bmp2gray16

Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: I0095e0b212f799a8bc6f5fbb785c015070ed2aa7

tools: rockchip: support hostprogs for pack tools

- include: boot_merge/trust_merge/loaderimage/resource_tool/checksum;
- porting from rkdevelop and base on commit 8fd1d8f
(resource: get resource

tools: rockchip: support hostprogs for pack tools

- include: boot_merge/trust_merge/loaderimage/resource_tool/checksum;
- porting from rkdevelop and base on commit 8fd1d8f
(resource: get resource primary from boot partition);
- clean generated binary file when execute clean command;

Change-Id: I41c1893c2da0a0f25c2d39dbbd933f89fbb04948
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>

show more ...

UPSTREAM: pylibfdt: move pylibfdt to scripts/dtc/pylibfdt and refactor makefile

The pylibfdt is used by dtoc (and, indirectly by binman), but there
is no reason why it must be generated in the tools

UPSTREAM: pylibfdt: move pylibfdt to scripts/dtc/pylibfdt and refactor makefile

The pylibfdt is used by dtoc (and, indirectly by binman), but there
is no reason why it must be generated in the tools/ directory.

Recently, U-Boot switched over to the bundled DTC, and the directory
structure under scripts/dtc/ now mirrors the upstream DTC project.
So, scripts/dtc/pylibfdt is the best location.

I also rewrote the Makefile in a cleaner Kbuild style.

The scripts from the upstream have been moved as follows:

lib/libfdt/pylibfdt/setup.py -> scripts/dtc/pylibfdt/setup.py
lib/libfdt/pylibfdt/libfdt.i -> scripts/dtc/pylibfdt/libfdt.i_shipped

The .i_shipped is coped to .i during building because the .i must be
located in the objtree when we build it out of tree.

Change-Id: I48233cbae93794809397b7160234469f66fa11dc
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
(cherry picked from commit 15b97f5c5e6d88e0560c6928f3acd01c999a494d)

show more ...

tools: .gitignore: Add libfdt related files

Some files are generated during libfdt build. Ignore them.

This was wrongly put in the .gitignore in the root directory before.
Now let's remove entries

tools: .gitignore: Add libfdt related files

Some files are generated during libfdt build. Ignore them.

This was wrongly put in the .gitignore in the root directory before.
Now let's remove entries there and put them in the right place.

Fixes: 34e2c285 ("gitignore: add intermediates from libfdt build")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

tools: .gitignore: Sort in alphabetical order

These are currently out of alphabetical order.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

Merge git://git.denx.de/u-boot-mips

MIPS: Stop building position independent code

U-Boot has up until now built with -fpic for the MIPS architecture,
producing position independent code which uses indirection through a
global offset t

MIPS: Stop building position independent code

U-Boot has up until now built with -fpic for the MIPS architecture,
producing position independent code which uses indirection through a
global offset table, making relocation fairly straightforward as it
simply involves patching up GOT entries.

Using -fpic does however have some downsides. The biggest of these is
that generated code is bloated in various ways. For example, function
calls are indirected through the GOT & the t9 register:

8f998064 lw t9,-32668(gp)
0320f809 jalr t9

Without -fpic the call is simply:

0f803f01 jal be00fc04 <puts>

This is more compact & faster (due to the lack of the load & the
dependency the jump has on its result). It is also easier to read &
debug because the disassembly shows what function is being called,
rather than just an offset from gp which would then have to be looked up
in the ELF to discover the target function.

Another disadvantage of -fpic is that each function begins with a
sequence to calculate the value of the gp register, for example:

3c1c0004 lui gp,0x4
279c3384 addiu gp,gp,13188
0399e021 addu gp,gp,t9

Without using -fpic this sequence no longer appears at the start of each
function, reducing code size considerably.

This patch switches U-Boot from building with -fpic to building with
-fno-pic, in order to gain the benefits described above. The cost of
this is an extra step during the build process to extract relocation
data from the ELF & write it into a new .rel section in a compact
format, plus the added complexity of dealing with multiple types of
relocation rather than the single type that applied to the GOT. The
benefit is smaller, cleaner, more debuggable code. The relocate_code()
function is reimplemented in C to handle the new relocation scheme,
which also makes it easier to read & debug.

Taking maltael_defconfig as an example the size of u-boot.bin built
using the Codescape MIPS 2016.05-06 toolchain (gcc 4.9.2, binutils
2.24.90) shrinks from 254KiB to 224KiB.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: u-boot@lists.denx.de
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-sunxi

tools: sunxi: Add spl image builder

This program generates raw SPL images that can be flashed on the NAND with
the ECC and randomizer properly set up.

This has been copied (and tweaked to find the

tools: sunxi: Add spl image builder

This program generates raw SPL images that can be flashed on the NAND with
the ECC and randomizer properly set up.

This has been copied (and tweaked to find the right headers) from the
sunxi-tools (https://github.com/linux-sunxi/sunxi-tools) upstream
repository, commit 1c3a6ca5.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-net

tools: Add tool to add crc8 to a mac address

This patch adds a little tool that takes a generic MAC address and
generates a CRC byte for it. The output is the full MAC address without
any separators

tools: Add tool to add crc8 to a mac address

This patch adds a little tool that takes a generic MAC address and
generates a CRC byte for it. The output is the full MAC address without
any separators, ready written into an EEPROM.

Signed-off-by: Olliver Schinagl <o.schinagl@ultimaker.com>
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

Signed-off-by: Stefano Babic <sbabic@denx.de>

tools: Add entry for generated tools/bin2header to tools/.gitignore

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>

Merge git://git.denx.de/u-boot-x86

gitignore: Add defconfig and fdtgrep

Ignore defconfig and tools/fdtgrep.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

tools: remove mpc86x_clk tool

This is commented out in the Makefile for more than 10 years.
I assume it is proof that this tool is unused.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.

tools: remove mpc86x_clk tool

This is commented out in the Makefile for more than 10 years.
I assume it is proof that this tool is unused.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Pantelis Antoniou <panto@intracom.gr>

show more ...

Merge git://git.denx.de/u-boot-x86

tools: Add ifdtool to .gitignore

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

gitignore: ignore atmel pmecc parameter tool

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>

Merge branch 'master' of git://git.denx.de/u-boot

Signed-off-by: Stefano Babic <sbabic@denx.de>

Conflicts:
boards.cfg

Merge branch 'u-boot/master' into 'u-boot-arm/master'

.gitignore: move *.exe pattern to the top gitignore for Cygwin

GCC on Cygwin generates executables with .exe extension,
for example:
scripts/basic/fixdep.exe
scripts/docproc.exe

To ignore them, *

.gitignore: move *.exe pattern to the top gitignore for Cygwin

GCC on Cygwin generates executables with .exe extension,
for example:
scripts/basic/fixdep.exe
scripts/docproc.exe

To ignore them, *.exe pattern should be moved
from tools/.gitignore to ./.gitignore

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

show more ...

kbuild, tools: generate wrapper C sources automatically by Makefile

There are many source files shared between U-boot image and tools.
Instead of adding a lot of dummy wrapper files that just includ

kbuild, tools: generate wrapper C sources automatically by Makefile

There are many source files shared between U-boot image and tools.
Instead of adding a lot of dummy wrapper files that just include
the corresponding file in lib/ or common/ directory,
Makefile should automatically generate them.

The original inspiration for this came from
scripts/Makefile.asm-generic of Linux Kernel.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-arm

sunxi: non-FEL SPL boot support for sun7i

Add support for booting from an MMC card.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Henrik Nordström <henrik@henriknordstrom.net>
Signed-off-

sunxi: non-FEL SPL boot support for sun7i

Add support for booting from an MMC card.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Henrik Nordström <henrik@henriknordstrom.net>
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Reviewed-by: Marek Vasut <marex@denx.de>
Cc: Tom Cubie <Mr.hipboi@gmail.com>
Reviewed-by: Tom Rini <trini@ti.com>

show more ...