Kconfig: Drop CONFIG_SYS_I2C_DTT_ADDR

This option is only defined to a non-default value by canyonlands, which
needs conversion to driver model (where the I2C address would be defined
by the device

Kconfig: Drop CONFIG_SYS_I2C_DTT_ADDR

This option is only defined to a non-default value by canyonlands, which
needs conversion to driver model (where the I2C address would be defined
by the device tree).

Drop this option.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

show more ...

Convert CONFIG_DS4510 to Kconfig

This converts the following to Kconfig:
CONFIG_DS4510

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko

Convert CONFIG_DS4510 to Kconfig

This converts the following to Kconfig:
CONFIG_DS4510

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

show more ...

Kconfig: Drop CONFIG_CMD_DS4510

This option enables a command in the driver. But the functions defined by
the driver are not called anywhere else in U-Boot. So it does not seem
useful to have this d

Kconfig: Drop CONFIG_CMD_DS4510

This option enables a command in the driver. But the functions defined by
the driver are not called anywhere else in U-Boot. So it does not seem
useful to have this driver without its commands.

Drop this option, move the header file out of the common include/
directory and make all the function static.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

show more ...

Kconfig: Drop CONFIG_CMD_DS4510_RST

This option is only used in one driver and is not enabled by any board. It
does not seem worth having the ability to remove this part of the support.

Drop the op

Kconfig: Drop CONFIG_CMD_DS4510_RST

This option is only used in one driver and is not enabled by any board. It
does not seem worth having the ability to remove this part of the support.

Drop the option.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

show more ...

Kconfig: Drop CONFIG_CMD_DS4510_MEM

This option is only used in one driver and is not enabled by any board. It
does not seem worth having the ability to remove this part of the support.

Drop the op

Kconfig: Drop CONFIG_CMD_DS4510_MEM

This option is only used in one driver and is not enabled by any board. It
does not seem worth having the ability to remove this part of the support.

Drop the option.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

show more ...

Kconfig: Drop CONFIG_CMD_DS4510_INFO

This option is only used in one driver and two boards. It does not seem
worth having the ability to remove this part of the support.

Drop the option.

Signed-of

Kconfig: Drop CONFIG_CMD_DS4510_INFO

This option is only used in one driver and two boards. It does not seem
worth having the ability to remove this part of the support.

Drop the option.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

show more ...

FIT: Rename FIT_DISABLE_SHA256 to FIT_ENABLE_SHA256_SUPPORT

We rename CONFIG_FIT_DISABLE_SHA256 to CONFIG_FIT_ENABLE_SHA256_SUPPORT which
is enabled by default and now a positive option. Convert th

FIT: Rename FIT_DISABLE_SHA256 to FIT_ENABLE_SHA256_SUPPORT

We rename CONFIG_FIT_DISABLE_SHA256 to CONFIG_FIT_ENABLE_SHA256_SUPPORT which
is enabled by default and now a positive option. Convert the handful of boards
that were disabling it before to save space.

Cc: Dirk Eibach <eibach@gdsys.de>
Cc: Lukasz Dalek <luk0104@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

ARM: rmobile: salvator-x: Adjust UART clock

The UART uses internal SCIF clock except on R8A7795 H3 WS1.0 .
Use the internal clock and ignore the early version of the chip.

Signed-off-by: Marek Vasu

ARM: rmobile: salvator-x: Adjust UART clock

The UART uses internal SCIF clock except on R8A7795 H3 WS1.0 .
Use the internal clock and ignore the early version of the chip.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-video

video: bmp: rename CONFIG_BMP_24BMP to CONFIG_BMP_24BPP

Due to a typo, the 24 bit-per-pixel configuration ends in 24BMP
instead of 24BPP. This change renames it throughout the source tree
for consis

video: bmp: rename CONFIG_BMP_24BMP to CONFIG_BMP_24BPP

Due to a typo, the 24 bit-per-pixel configuration ends in 24BMP
instead of 24BPP. This change renames it throughout the source tree
for consistency and to make moving these options into Kconfig easier
and less error-prone.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-i2c

Kconfig: OMAP: USB: Migrate CONFIG_USB_EHCI_OMAP to Kconfig

Follow the exiting logic for the i.MX options when migrating this
option.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Tom Rini <trini@

Kconfig: OMAP: USB: Migrate CONFIG_USB_EHCI_OMAP to Kconfig

Follow the exiting logic for the i.MX options when migrating this
option.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Marek Vasut <marex@denx.de>

show more ...

whitelist: Drop more unused OMAP symbols

The symbol CONFIG_OMAP3_LOGIC_USE_NEW_PRODUCT_ID was recently dropped
from usage and CONFIG_OMAP3_MICRON_DDR is unused in code.

Signed-off-by: Tom Rini <tri

whitelist: Drop more unused OMAP symbols

The symbol CONFIG_OMAP3_LOGIC_USE_NEW_PRODUCT_ID was recently dropped
from usage and CONFIG_OMAP3_MICRON_DDR is unused in code.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

omap: Drop CONFIG_OMAP_VC_I2C_HS_MCODE

The symbol CONFIG_OMAP_VC_I2C_HS_MCODE always uses the default value.
Restructure the comment and code such that if a need arises later to use
another value we

omap: Drop CONFIG_OMAP_VC_I2C_HS_MCODE

The symbol CONFIG_OMAP_VC_I2C_HS_MCODE always uses the default value.
Restructure the comment and code such that if a need arises later to use
another value we can address this then.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

watchdog: Migrate OMAP_WATCHDOG to Kconfig

Move this entry to Kconfig. As it is a hardware watchdog, select
HW_WATCHDOG. While we could default to enabling this for all platforms,
it is currently

watchdog: Migrate OMAP_WATCHDOG to Kconfig

Move this entry to Kconfig. As it is a hardware watchdog, select
HW_WATCHDOG. While we could default to enabling this for all platforms,
it is currently only enabled by default on AM33XX, so keep that logic
today.

Cc: Roger Meier <r.meier@siemens.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

omap: spi: Drop CONFIG_OMAP3_SPI_D0_D1_SWAPPED support

This particular quirk is not enabled in any config files today. It does
however exist and is handled correctly in device trees and via
CONFIG_

omap: spi: Drop CONFIG_OMAP3_SPI_D0_D1_SWAPPED support

This particular quirk is not enabled in any config files today. It does
however exist and is handled correctly in device trees and via
CONFIG_DM_SPI. So we drop the symbol now and add a comment to indicate
that any (new) boards that require this quirk need to enable DM_SPI
instead.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

omap3: Migrate CONFIG_OMAP3_GPIO_X to Kconfig

The symbols CONFIG_OMAP3_GPIO_X control if we enable the clocks for a
given GPIO bank in U-Boot. select the required banks for each target.
In some cas

omap3: Migrate CONFIG_OMAP3_GPIO_X to Kconfig

The symbols CONFIG_OMAP3_GPIO_X control if we enable the clocks for a
given GPIO bank in U-Boot. select the required banks for each target.
In some cases we need to also migrate from CONFIG_USB_EHCI (deprecated,
in include/configs/) to CONFIG_USB_EHCI_HCD as we only require the GPIO
bank to be enabled if USB is also enabled.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

gpio: Move OMAP_GPIO to Kconfig

This driver is used often enough such that we want to have this enabled
by default on any ARCH_OMAP2PLUS board, and this only compiles on
ARCH_OMAP2PLUS due to requir

gpio: Move OMAP_GPIO to Kconfig

This driver is used often enough such that we want to have this enabled
by default on any ARCH_OMAP2PLUS board, and this only compiles on
ARCH_OMAP2PLUS due to required defines, so mark that as the depends.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

omap3: Drop unused CONFIG_OMAP3_xxx board defines

We no longer have a need for a per-board CONFIG_OMAP3_xxx define (we
have CONFIG_TARGET_xxx when this is required), so drop these unused
references.

omap3: Drop unused CONFIG_OMAP3_xxx board defines

We no longer have a need for a per-board CONFIG_OMAP3_xxx define (we
have CONFIG_TARGET_xxx when this is required), so drop these unused
references.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

omap4: Drop redundant CONFIG_OMAP4430 symbol

While there are a few different OMAP4 SoCs, today we always set
CONFIG_OMAP4430 and CONFIG_OMAP44XX. Convert the few test of
CONFIG_OMAP4430 to CONFIG_O

omap4: Drop redundant CONFIG_OMAP4430 symbol

While there are a few different OMAP4 SoCs, today we always set
CONFIG_OMAP4430 and CONFIG_OMAP44XX. Convert the few test of
CONFIG_OMAP4430 to CONFIG_OMAP44XX.

Cc: Marek Vasut <marex@denx.de>
Cc: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

omap3: Drop CONFIG_OMAP3_EVM, switch to CONFIG_TARGET_OMAP3_EVM when needed

We make use of CONFIG_OMAP3_EVM today to know when to do a specific
tweak in MUSB. This can be tested on via CONFIG_TARGE

omap3: Drop CONFIG_OMAP3_EVM, switch to CONFIG_TARGET_OMAP3_EVM when needed

We make use of CONFIG_OMAP3_EVM today to know when to do a specific
tweak in MUSB. This can be tested on via CONFIG_TARGET_OMAP3_EVM
instead, so switch there so we can drop the now unused symbol
CONFIG_OMAP3_EVM. In investigating what to do about the symbol usage we
see that the cairo board defines the same function, but never called it
(as it does not define CONFIG_OMAP3_EVM) and was just returning anyhow,
so drop that function from that board.

Cc: "Albert ARIBAUD (3ADEV)" <albert.aribaud@3adev.fr>
Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

omap5: Migrate CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC to Kconfig

While in theory this value could be used in places outside of "omap5"
(such as OMAP4), we only make use of it today in OMAP5, so pl

omap5: Migrate CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC to Kconfig

While in theory this value could be used in places outside of "omap5"
(such as OMAP4), we only make use of it today in OMAP5, so place the
Kconfig entry there. Given that Kconfig lets us provide a default, we
drop CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC entirely. The contents of
doc/README.omap-reset-time make a good help entry, so adjust them
slightly and delete the file. Move the comment about range to where we
use the value now, and have Kconfig enforce the upper bound.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

TI: Drop 'CONFIG_OMAP'

In the two cases in the code where we use CONFIG_OMAP as a useful test
currently we can make use of CONFIG_ARCH_OMAP2PLUS instead. With that
changed we can drop all defines o

TI: Drop 'CONFIG_OMAP'

In the two cases in the code where we use CONFIG_OMAP as a useful test
currently we can make use of CONFIG_ARCH_OMAP2PLUS instead. With that
changed we can drop all defines of CONFIG_OMAP. While in here,
CONFIG_OMAP3430 is only defined and then never used, so drop.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Drop CONFIG_I2CFAST

This option is not used in U-Boot. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>

i2c: Drop CONFIG_SYS_I2C_BOARD_LATE_INIT

This option is not used by any boards. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>