| #
09642269 |
| 26-Aug-2014 |
Guillaume GARDET <guillaume.gardet@free.fr> |
omap3_beagle: Add boot script support to omap3 beagle board
This patch adds boot script support to omap3 beagle board.
Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr>
Cc: Tom Rini <trini
omap3_beagle: Add boot script support to omap3 beagle board
This patch adds boot script support to omap3 beagle board.
Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr>
Cc: Tom Rini <trini@ti.com>
show more ...
|
| #
c23154aa |
| 08-Aug-2014 |
Stefano Babic <sbabic@denx.de> |
Merge branch 'master' of git://git.denx.de/u-boot-arm
|
| #
362f16b1 |
| 29-Jul-2014 |
Tom Rini <trini@ti.com> |
Merge branch 'master' of git://git.denx.de/u-boot-arm
|
| #
b1cdd8ba |
| 28-Jul-2014 |
Albert ARIBAUD <albert.u.boot@aribaud.net> |
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
|
| #
434f2cfc |
| 18-Jul-2014 |
pekon gupta <pekon@ti.com> |
ARM: omap: move board specific NAND configs out from ti_armv7_common.h
This patch moves some board specific NAND configs:
- FROM: generic config file 'ti_armv7_common.h'
- TO: individual board con
ARM: omap: move board specific NAND configs out from ti_armv7_common.h
This patch moves some board specific NAND configs:
- FROM: generic config file 'ti_armv7_common.h'
- TO: individual board config files using these configs.
So that each board can independently set the value as per its design.
Following configs are affected in this patch:
CONFIG_SYS_NAND_U_BOOT_OFFS: <refer doc/README.nand>
CONFIG_CMD_SPL_NAND_OFS: <refer doc/README.falcon>
CONFIG_SYS_NAND_SPL_KERNEL_OFFS: <refer doc/README.falcon>
CONFIG_CMD_SPL_WRITE_SIZE: <refer doc/README.falcon>
This patch also updates documentation for few of above NAND configs.
Signed-off-by: Pekon Gupta <pekon@ti.com>
show more ...
|
| #
222a3113 |
| 18-Jul-2014 |
pekon gupta <pekon@ti.com> |
ARM: omap: clean redundant PISMO_xx macros used in OMAP3
PISMO_xx macros were used to define 'Platform Independent Storage MOdule'
related GPMC configurations. This patch
- Replaces these OMAP3 spec
ARM: omap: clean redundant PISMO_xx macros used in OMAP3
PISMO_xx macros were used to define 'Platform Independent Storage MOdule'
related GPMC configurations. This patch
- Replaces these OMAP3 specific macros with generic CONFIG_xx macros as provided
by current u-boot infrastructure.
- Removes unused redundant macros, which are no longer required after
merging of common platform code in following commit
commit a0a37183bd75e74608bc78c8d0e2a34454f95a91
ARM: omap: merge GPMC initialization code for all platform
+-----------------+-----------------------------------------------------------+
| Macro | Reason for removal |
+-----------------+-----------------------------------------------------------+
| PISMO1_NOR_BASE | duplicate of CONFIG_SYS_FLASH_BASE |
+-----------------+-----------------------------------------------------------+
| PISMO1_NAND_BASE| duplicate of CONFIG_SYS_NAND_BASE |
+-----------------+-----------------------------------------------------------+
| PISMO1_ONEN_BASE| duplicate of CONFIG_SYS_ONENAND_BASE |
+-----------------+-----------------------------------------------------------+
| PISMO1_NAND_SIZE| GPMC accesses NAND device via I/O mapped registers so |
| | configuring GPMC chip-select for smallest allowable |
| | segment (GPMC_SIZE_16M) is enough. |
+-----------------+-----------------------------------------------------------+
| PISMO1_ONEN_SIZE| OneNAND uses a fixed GPMC chip-select address-space of |
| | 128MB (GPMC_SIZE_128M) |
+-----------------+-----------------------------------------------------------+
+-----------------+-----------------------------------------------------------+
| PISMO1_NOR | Unused Macros |
| PISMO1_NAND | |
| PISMO2_CS0 | |
| PISMO2_CS1 | |
| PISMO1_ONENAND | |
| PISMO2_NAND_CS0 | |
| PISMO2_NAND_CS1 | |
| PISMO1_NOR_BASE | |
| PISMO1_NAND_BASE| |
| PISMO2_CS0_BASE | |
+-----------------+-----------------------------------------------------------+
Signed-off-by: Pekon Gupta <pekon@ti.com>
show more ...
|
| #
44bd26fa |
| 14-Jul-2014 |
Alexander Holler <holler@ahsoftware.de> |
omap3_beagle: handle import of environments in files with CRLF as line endings
Use the new option -r for env import.
Signed-off-by: Alexander Holler <holler@ahsoftware.de>
|
| #
dab5e346 |
| 16-Jul-2014 |
Stefano Babic <sbabic@denx.de> |
Merge branch 'master' of git://git.denx.de/u-boot
Signed-off-by: Stefano Babic <sbabic@denx.de>
Conflicts:
boards.cfg
|
| #
fafee9ed |
| 23-Jun-2014 |
Tyler Baker <tyler.baker@linaro.org> |
TI:omap3: enable CONFIG_CMD_DHCP for omap3_beagle
The following patch re-enables the dhcp functionality on omap3_beagle.
It was removed with df4dbb5df6ab1c1d27b3fd4acbaad69b47095daf when
omap3_beagl
TI:omap3: enable CONFIG_CMD_DHCP for omap3_beagle
The following patch re-enables the dhcp functionality on omap3_beagle.
It was removed with df4dbb5df6ab1c1d27b3fd4acbaad69b47095daf when
omap3_beagle was converted to use ti_omap3_common.h. I have tested
beagleboard and beagleboard-xm with this patch and confirmed dhcp is
working.
Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
show more ...
|
| #
55e8250b |
| 08-Jun-2014 |
Tom Rini <trini@ti.com> |
Merge branch 'master' of git://git.denx.de/u-boot-arm
|
| #
5ed28948 |
| 08-Jun-2014 |
Albert ARIBAUD <albert.u.boot@aribaud.net> |
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
|
| #
b80a6603 |
| 05-May-2014 |
pekon gupta <pekon@ti.com> |
mtd: nand: omap: add CONFIG_SYS_NAND_BUSWIDTH_16BIT to indicate NAND device bus-width
GPMC controller needs to be configured based on bus-width of the NAND device
connected to it. Also, dynamic dete
mtd: nand: omap: add CONFIG_SYS_NAND_BUSWIDTH_16BIT to indicate NAND device bus-width
GPMC controller needs to be configured based on bus-width of the NAND device
connected to it. Also, dynamic detection of NAND bus-width from on-chip ONFI
parameters is not possible in following situations:
SPL: SPL NAND drivers does not support ONFI parameter reading.
U-boot: GPMC controller iniitalization is done in omap_gpmc.c:board_nand_init()
which is called before probing for devices, hence any ONFI parameter
information is not available during GPMC initialization.
Thus, OMAP NAND driver expected board developers to explicitely write GPMC
configurations specific to NAND device attached on board in board files itself.
But this was troublesome for board manufacturers as they need to dive into
lengthy platform & SoC documents to find details of GPMC registers and
appropriate configurations to get NAND device working.
This patch instead adds existing CONFIG_SYS_NAND_BUSWIDTH_16BIT to board config
hich indicates that connected NAND device has x16 bus-width. And then based on
this config GPMC driver itself initializes itself based on NAND bus-width. This
keeps board developers free from knowing GPMC controller specific internals.
Signed-off-by: Pekon Gupta <pekon@ti.com>
show more ...
|
| #
f6ed9d50 |
| 22-May-2014 |
Tom Rini <trini@ti.com> |
Merge branch 'master' of git://git.denx.de/u-boot-arm
|
| #
c9afa7ce |
| 22-May-2014 |
Tom Rini <trini@ti.com> |
Merge branch 'master' of git://git.denx.de/u-boot-usb
|
| #
a90bed77 |
| 16-May-2014 |
Albert ARIBAUD <albert.u.boot@aribaud.net> |
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
|
| #
4180b3db |
| 14-May-2014 |
Marek Vasut <marex@denx.de> |
Merge remote-tracking branch 'u-boot/master' into test
|
| #
4fa2427c |
| 02-May-2014 |
Robert Nelson <robertcnelson@gmail.com> |
omap3_beagle: xM A/B validate new dtb exits in file system
Fall back to previous dtb used when omap3-beagle-xm-ab.dtb doesn't exist in file system
Signed-off-by: Robert Nelson <robertcnelson@gmail.
omap3_beagle: xM A/B validate new dtb exits in file system
Fall back to previous dtb used when omap3-beagle-xm-ab.dtb doesn't exist in file system
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
CC: Tom Rini <trini@ti.com>
CC: Nishanth Menon <nm@ti.com>
Acked-by: Tom Rini <trini@ti.com>
show more ...
|
| #
3d47ffb9 |
| 02-May-2014 |
Robert Nelson <robertcnelson@gmail.com> |
omap3_beagle: use omap3-beagle-xm-ab.dtb for the xM AB revision
As of v3.15-rc3, omap3-beagle-xm-ab.dtb now exists with the usb hub (ehci) enabled.
For older kernels versions, cherry pick from main
omap3_beagle: use omap3-beagle-xm-ab.dtb for the xM AB revision
As of v3.15-rc3, omap3-beagle-xm-ab.dtb now exists with the usb hub (ehci) enabled.
For older kernels versions, cherry pick from mainline:
ef78f3869c37c480f1d58462a760a40dabc823f4
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
CC: Tom Rini <trini@ti.com>
CC: Nishanth Menon <nm@ti.com>
show more ...
|
| #
bcb879c0 |
| 09-May-2014 |
Tom Rini <trini@ti.com> |
Merge branch 'master' of git://git.denx.de/u-boot-arm
|
| #
dd5b68fb |
| 05-May-2014 |
Rob Herring <robh@kernel.org> |
arm: beagle: enable Android fastboot support
Enable Android Fastboot support on omap3_beagle board.
Signed-off-by: Rob Herring <robh@kernel.org>
|
| #
3deb22a4 |
| 29-Apr-2014 |
Stefano Babic <sbabic@denx.de> |
Merge branch 'master' of git://git.denx.de/u-boot-arm
|
| #
c9aab0f9 |
| 21-Apr-2014 |
Albert ARIBAUD <albert.u.boot@aribaud.net> |
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
|
| #
df4dbb5d |
| 03-Apr-2014 |
Tom Rini <trini@ti.com> |
TI:omap3: Convert omap3_beagle to ti_omap3_common.h
Convert to using the common config files. This requires a little more
flexibility in the common files than we had been using before.
Signed-off-
TI:omap3: Convert omap3_beagle to ti_omap3_common.h
Convert to using the common config files. This requires a little more
flexibility in the common files than we had been using before.
Signed-off-by: Tom Rini <trini@ti.com>
show more ...
|
| #
1cad23c5 |
| 04-Apr-2014 |
Stefano Babic <sbabic@denx.de> |
Merge branch 'master' of git://git.denx.de/u-boot-arm into master
Conflicts:
arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg
arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg
Signed-off-by: Stefano Babic
Merge branch 'master' of git://git.denx.de/u-boot-arm into master
Conflicts:
arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg
arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg
Signed-off-by: Stefano Babic <sbabic@denx.de>
show more ...
|
| #
ab6423ca |
| 25-Mar-2014 |
Albert ARIBAUD <albert.u.boot@aribaud.net> |
Merge branch 'u-boot/master' into 'u-boot-arm/master'
Trivial merge conflict, needed to manually remove
local_info as per commit 41364f0f.
Conflicts:
board/samsung/common/board.c
|