| #
3f6dcdb9 |
| 24-Apr-2015 |
Tom Rini <trini@konsulko.com> |
Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq
|
| #
f8cb101e |
| 20-Mar-2015 |
York Sun <yorksun@freescale.com> |
driver/i2c/mxc: Enable I2C bus 3 and 4
Some SoCs have more than two I2C busses. Instead of adding ifdef
to the driver, macros are put into board header file where
CONFIG_SYS_I2C_MXC is defined.
Sig
driver/i2c/mxc: Enable I2C bus 3 and 4
Some SoCs have more than two I2C busses. Instead of adding ifdef
to the driver, macros are put into board header file where
CONFIG_SYS_I2C_MXC is defined.
Signed-off-by: York Sun <yorksun@freescale.com>
CC: Heiko Schocher <hs@denx.de>
show more ...
|
| #
98cb0efd |
| 10-Mar-2015 |
gaurav rana <gaurav.rana@freescale.com> |
Add bootscript support to esbc_validate.
1. Default environment will be used for secure boot flow
which can't be edited or saved.
2. Command for secure boot is predefined in the default
environmen
Add bootscript support to esbc_validate.
1. Default environment will be used for secure boot flow
which can't be edited or saved.
2. Command for secure boot is predefined in the default
environment which will run on autoboot (and autoboot is
the only option allowed in case of secure boot) and it
looks like this:
#define CONFIG_SECBOOT \
"setenv bs_hdraddr 0xe8e00000;" \
"esbc_validate $bs_hdraddr;" \
"source $img_addr;" \
"esbc_halt;"
#endif
3. Boot Script can contain esbc_validate commands and bootm command.
Uboot source command used in default secure boot command will
run the bootscript.
4. Command esbc_halt added to ensure either bootm executes
after validation of images or core should just spin.
Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
show more ...
|
| #
b491d975 |
| 10-Apr-2015 |
Albert ARIBAUD <albert.u.boot@aribaud.net> |
Merge branch 'u-boot/master'
|
| #
482cbd55 |
| 31-Mar-2015 |
Tom Rini <trini@konsulko.com> |
Merge git://git.denx.de/u-boot-nand-flash
|
| #
073adf98 |
| 03-Feb-2015 |
Peter Tyser <ptyser@xes-inc.com> |
nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE
The CONFIG_MTD_NAND_VERIFY_WRITE has been removed from Linux for some
time and a more generic method of NAND verification now exists in U-Boot.
Signed-off-
nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE
The CONFIG_MTD_NAND_VERIFY_WRITE has been removed from Linux for some
time and a more generic method of NAND verification now exists in U-Boot.
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Tested-by: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
show more ...
|
| #
b9cb6482 |
| 02-Mar-2015 |
Stefano Babic <sbabic@denx.de> |
Merge branch 'master' of git://git.denx.de/u-boot
|
| #
1606b34a |
| 25-Feb-2015 |
Tom Rini <trini@ti.com> |
Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq
|
| #
180b8688 |
| 21-Jan-2015 |
Minghuan Lian <Minghuan.Lian@freescale.com> |
arm/ls1021a: add PCIe settings
The patch enables and adds PCIe settings for boards LS1021AQDS
and LS1021ATWR.
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Reviewed-by: York Sun <yorks
arm/ls1021a: add PCIe settings
The patch enables and adds PCIe settings for boards LS1021AQDS
and LS1021ATWR.
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
show more ...
|
| #
e72d3443 |
| 13-Feb-2015 |
Stefano Babic <sbabic@denx.de> |
Merge branch 'master' of git://git.denx.de/u-boot
|
| #
41ba57d0 |
| 17-Dec-2014 |
tang yuantian <Yuantian.Tang@freescale.com> |
fsl/ls1021qds: Add deep sleep support
Add deep sleep support on Freescale LS1021QDS platform.
Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
[York Sun: Fix conflict in fdt.c]
Reviewed-b
fsl/ls1021qds: Add deep sleep support
Add deep sleep support on Freescale LS1021QDS platform.
Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
[York Sun: Fix conflict in fdt.c]
Reviewed-by: York Sun <yorksun@freescale.com>
show more ...
|
| #
8fc2121a |
| 04-Jan-2015 |
Alison Wang <b18965@freescale.com> |
arm: ls102xa: Add LPUART support for LS1021AQDS board
This patch adds LPUART support for LS1021AQDS board.
For ls1021aqds_nor_lpuart_defconfig, LPUART is used as the console.
Signed-off-by: Alison
arm: ls102xa: Add LPUART support for LS1021AQDS board
This patch adds LPUART support for LS1021AQDS board.
For ls1021aqds_nor_lpuart_defconfig, LPUART is used as the console.
Signed-off-by: Alison Wang <alison.wang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
show more ...
|
| #
dd04832d |
| 16-Dec-2014 |
Xiubo Li <Li.Xiubo@freescale.com> |
ls102xa: dcu: Add platform support for DCU on LS1021AQDS board
This patch adds the CH7301 HDMI options and the common configuration
for DCU on LS1021AQDS board.
Signed-off-by: Xiubo Li <Li.Xiubo@fr
ls102xa: dcu: Add platform support for DCU on LS1021AQDS board
This patch adds the CH7301 HDMI options and the common configuration
for DCU on LS1021AQDS board.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Alison Wang <alison.wang@freescale.com>
Cc: Jason Jin <Jason.Jin@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
show more ...
|
| #
2c49323d |
| 11-Dec-2014 |
Tom Rini <trini@ti.com> |
Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq
|
| #
660673af |
| 21-Nov-2014 |
Xiubo Li <Li.Xiubo@freescale.com> |
ARM: ls102xa: Setting device's stream id for SMMUs.
LS1 has 4 SMMUs for address translation of the masters. All the
SMMUs' stream IDs are 8-bit. The address translation depends on the
stream ID of t
ARM: ls102xa: Setting device's stream id for SMMUs.
LS1 has 4 SMMUs for address translation of the masters. All the
SMMUs' stream IDs are 8-bit. The address translation depends on the
stream ID of the incoming transaction.
Each master has unique stream ID assigned to it and is configurable
through SCFG registers. The stream ID for the masters is identical
and share the same register field of STREAM ID registers.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
show more ...
|
| #
e87f3b30 |
| 21-Nov-2014 |
Xiubo Li <Li.Xiubo@freescale.com> |
ARM: ls102xa: allow all the peripheral access permission as R/W.
The Central Security Unit (CSU) allows secure world software to
change the default access control policies of peripherals/bus
slaves,
ARM: ls102xa: allow all the peripheral access permission as R/W.
The Central Security Unit (CSU) allows secure world software to
change the default access control policies of peripherals/bus
slaves, determining which bus masters may access them. This
allows peripherals to be separated into distinct security domains.
Combined with SMMU configuration of the system masters privileges,
these features provide protection against indirect unauthorized
access to data.
For now we configure all the peripheral access permissions as R/W.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
show more ...
|
| #
1a2826f6 |
| 21-Nov-2014 |
Xiubo Li <Li.Xiubo@freescale.com> |
ls102xa: changing a few targets' configurations.
Enable hypervisors utilizing the ARMv7 virtualization extension
on the LS1021A-QDS/TWR boards with the A7 core tile, we add the
required configuratio
ls102xa: changing a few targets' configurations.
Enable hypervisors utilizing the ARMv7 virtualization extension
on the LS1021A-QDS/TWR boards with the A7 core tile, we add the
required configuration variable.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
show more ...
|
| #
8ab967b6 |
| 09-Dec-2014 |
Alison Wang <b18965@freescale.com> |
arm: ls102xa: Add NAND boot support for LS1021AQDS board
This patch adds NAND boot support for LS1021AQDS board. SPL
framework is used. PBL initialize the internal RAM and copy
SPL to it, then SPL i
arm: ls102xa: Add NAND boot support for LS1021AQDS board
This patch adds NAND boot support for LS1021AQDS board. SPL
framework is used. PBL initialize the internal RAM and copy
SPL to it, then SPL initialize DDR using SPD and copy u-boot
from NAND flash to DDR, finally SPL transfer control to u-boot.
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Alison Wang <alison.wang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
show more ...
|
| #
d612f0ab |
| 09-Dec-2014 |
Alison Wang <b18965@freescale.com> |
arm: ls102xa: Add QSPI boot support for LS1021AQDS/TWR board
This patch adds QSPI boot support for LS1021AQDS/TWR board.
The QSPI boot image need to be programmed into the QSPI flash
first. Then the
arm: ls102xa: Add QSPI boot support for LS1021AQDS/TWR board
This patch adds QSPI boot support for LS1021AQDS/TWR board.
The QSPI boot image need to be programmed into the QSPI flash
first. Then the booting will start from QSPI memory space.
Signed-off-by: Alison Wang <alison.wang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
show more ...
|
| #
4c59ab9c |
| 09-Dec-2014 |
Alison Wang <b18965@freescale.com> |
arm: ls102xa: Fix SD/NAND/QSPI boot defination error for QE support
The SD/NAND/QSPI boot definations are wrong for QE support, this
patch is to fix this error.
Signed-off-by: Alison Wang <alison.w
arm: ls102xa: Fix SD/NAND/QSPI boot defination error for QE support
The SD/NAND/QSPI boot definations are wrong for QE support, this
patch is to fix this error.
Signed-off-by: Alison Wang <alison.wang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
show more ...
|
| #
8251ed23 |
| 09-Dec-2014 |
Alison Wang <b18965@freescale.com> |
arm: ls1021a: Add CONFIG_DOS_PARTITION and CONFIG_CMD_FAT support
This patch will fix the bug that the partitions on the SD card could
not be accessed and add the support for the FAT fs.
Signed-off
arm: ls1021a: Add CONFIG_DOS_PARTITION and CONFIG_CMD_FAT support
This patch will fix the bug that the partitions on the SD card could
not be accessed and add the support for the FAT fs.
Signed-off-by: Alison Wang <alison.wang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
show more ...
|
| #
86949c2b |
| 03-Dec-2014 |
Alison Wang <b18965@freescale.com> |
arm: ls102xa: Add SD boot support for LS1021AQDS board
This patch adds SD boot support for LS1021AQDS board. SPL
framework is used. PBL initialize the internal RAM and copy
SPL to it, then SPL initi
arm: ls102xa: Add SD boot support for LS1021AQDS board
This patch adds SD boot support for LS1021AQDS board. SPL
framework is used. PBL initialize the internal RAM and copy
SPL to it, then SPL initialize DDR using SPD and copy u-boot
from SD card to DDR, finally SPL transfer control to u-boot.
Signed-off-by: Alison Wang <alison.wang@freescale.com>
Signed-off-by: Jason Jin <jason.jin@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
show more ...
|
| #
da419027 |
| 31-Oct-2014 |
Minghuan Lian <Minghuan.Lian@freescale.com> |
arm: ls102xa: Update PCIe dts node status
The patch changes PCIe dts node status to 'disabled' if the
corresponding controller is disabled according to serdes protocol.
Signed-off-by: Minghuan Lian
arm: ls102xa: Update PCIe dts node status
The patch changes PCIe dts node status to 'disabled' if the
corresponding controller is disabled according to serdes protocol.
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
show more ...
|
| #
85bafb6d |
| 25-Nov-2014 |
Tom Rini <trini@ti.com> |
Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq
|
| #
272c5265 |
| 17-Oct-2014 |
Yuan Yao <yao.yuan@freescale.com> |
ls102xa: ifc: nor: fix the write issue when bytes unaligned
Add define CONFIG_SYS_WRITE_SWAPPED_DATA.
For LS1021AQDS and LS1021QTWR nor flash write should swap the
bytes when handle unaligned tail b
ls102xa: ifc: nor: fix the write issue when bytes unaligned
Add define CONFIG_SYS_WRITE_SWAPPED_DATA.
For LS1021AQDS and LS1021QTWR nor flash write should swap the
bytes when handle unaligned tail bytes.
Because of the ending, if the date bus width is 16-bits and the
number of bytes is odd, we should swap the byte when write the
last one.
Signed-off-by: Yuan Yao <yao.yuan@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
show more ...
|