Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE

The change is currently needed to be able to remove the board
configuration scripting from the top level Makefile and replace it by
a simple, table driven

Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE

The change is currently needed to be able to remove the board
configuration scripting from the top level Makefile and replace it by
a simple, table driven script.

Moving this configuration setting into the "CONFIG_*" name space is
also desirable because it is needed if we ever should move forward to
a Kconfig driven configuration system.

Signed-off-by: Wolfgang Denk <wd@denx.de>

show more ...

mkconfig: change CONFIG_MK_ prefix into plain CONFIG_

When planning for more generalization and Makefile cleanup it became
obvious that the introduction of a separate CONFIG_MK_ name space for
confi

mkconfig: change CONFIG_MK_ prefix into plain CONFIG_

When planning for more generalization and Makefile cleanup it became
obvious that the introduction of a separate CONFIG_MK_ name space for
config options that were set through scripting in the Makefile was
not a good idea.

Originally the idea was to provide a script-free approach to supply
configuration options - there was no real need for a separate name
space. But when we now convert the existing Makefile entries to make
use of this approach, it would mean that we have to touch a large
number of board config files and add #ifdef / #define sequences to
"convert" from the CONFIG_MK_ to the CONFIG_ name space.

It seems much cleaner to get rid of this somewhat arbitrary _MK
string now for the few boards that actually use it.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>

show more ...

Merge branch 'next' of /home/wd/git/u-boot/next

Conflicts:
include/ppc4xx.h

Signed-off-by: Wolfgang Denk <wd@denx.de>

e300: increase CONFIG_SYS_BOOTMAPSZ to allow booting large kernels

Newer Linux kernels can overrun the initial memory window used for
booting with their BSS area. When this happens, they overwrite t

e300: increase CONFIG_SYS_BOOTMAPSZ to allow booting large kernels

Newer Linux kernels can overrun the initial memory window used for
booting with their BSS area. When this happens, they overwrite the FDT
and silently fail to boot.

On e300 CPUs, the Linux kernel uses an initial BAT covering the first
256MB of RAM. See arch/powerpc/kernel/head_32.S for details. Increase
the value of CONFIG_SYS_BOOTMAPSZ to accommodate the maximum value
allowed by Linux. This will allow very large kernels to boot.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

show more ...

mpc831xerdb: enable mtdparts for NAND

The default partition table matches the .dts files for these boards in
Linux. This allows these partitions to be used by name with U-Boot's
"nand" command.

Si

mpc831xerdb: enable mtdparts for NAND

The default partition table matches the .dts files for these boards in
Linux. This allows these partitions to be used by name with U-Boot's
"nand" command.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

show more ...

Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature

This patch removes the completely unused CONFIG_SERIAL_SOFTWARE_FIFO
feature from U-Boot. It has only been implemented for PPC4xx and was not
used a

Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature

This patch removes the completely unused CONFIG_SERIAL_SOFTWARE_FIFO
feature from U-Boot. It has only been implemented for PPC4xx and was not
used at all. So let's remove it and make the code smaller and cleaner.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

powerpc: Update configs to properly set FSL_ELBC

Some parts that have an Enhanced Local Bus Controller weren't
setting CONFIG_FSL_ELBC. Fix this so we can use this define
properly going forward (cu

powerpc: Update configs to properly set FSL_ELBC

Some parts that have an Enhanced Local Bus Controller weren't
setting CONFIG_FSL_ELBC. Fix this so we can use this define
properly going forward (currently it's only used if PHYS_64BIT is
set, which meant not all platforms needed to have it set correctly).

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-arm

Conflicts:
arch/arm/include/asm/mach-types.h
common/serial.c

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx

mpc83xx: turn on icache in core initialization to improve u-boot boot time

before, MPC8349ITX boots u-boot in 4.3sec:

column1 is elapsed time since first message
column2 is elapsed

mpc83xx: turn on icache in core initialization to improve u-boot boot time

before, MPC8349ITX boots u-boot in 4.3sec:

column1 is elapsed time since first message
column2 is elapsed time since previous message
column3 is the message
0.000 0.000: U-Boot 2010.03-00126-gfd4e49c (Apr 11 2010 - 17:25:29) MPC83XX
0.000 0.000:
0.000 0.000: Reset Status:
0.000 0.000:
0.032 0.032: CPU: e300c1, MPC8349E, Rev: 1.1 at 533.333 MHz, CSB: 266.667 MHz
0.032 0.000: Board: Freescale MPC8349E-mITX
0.032 0.000: UPMA: Configured for compact flash
0.032 0.000: I2C: ready
0.061 0.028: DRAM: 256 MB (DDR1, 64-bit, ECC off, 266.667 MHz)
1.516 1.456: FLASH: 16 MB
2.641 1.125: PCI: Bus Dev VenId DevId Class Int
2.652 0.011: 00 10 1095 3114 0180 00
2.652 0.000: PCI: Bus Dev VenId DevId Class Int
2.652 0.000: In: serial
2.652 0.000: Out: serial
2.652 0.000: Err: serial
2.682 0.030: Board revision: 1.0 (PCF8475A)
3.080 0.398: Net: TSEC1: No support for PHY id ffffffff; assuming generic
3.080 0.000: TSEC0, TSEC1
4.300 1.219: IDE: Bus 0: .** Timeout **

after, MPC8349ITX boots u-boot in 3.0sec:

0.010 0.010: U-Boot 2010.03-00127-g4b468cc-dirty (Apr 11 2010 - 17:47:29) MPC83XX
0.010 0.000:
0.010 0.000: Reset Status:
0.010 0.000:
0.017 0.007: CPU: e300c1, MPC8349E, Rev: 1.1 at 533.333 MHz, CSB: 266.667 MHz
0.017 0.000: Board: Freescale MPC8349E-mITX
0.038 0.020: UPMA: Configured for compact flash
0.038 0.000: I2C: ready
0.038 0.000: DRAM: 256 MB (DDR1, 64-bit, ECC off, 266.667 MHz)
0.260 0.222: FLASH: 16 MB
1.390 1.130: PCI: Bus Dev VenId DevId Class Int
1.390 0.000: 00 10 1095 3114 0180 00
1.390 0.000: PCI: Bus Dev VenId DevId Class Int
1.400 0.010: In: serial
1.400 0.000: Out: serial
1.400 0.000: Err: serial
1.400 0.000: Board revision: 1.0 (PCF8475A)
1.832 0.432: Net: TSEC1: No support for PHY id ffffffff; assuming generic
1.832 0.000: TSEC0, TSEC1
3.038 1.205: IDE: Bus 0: .** Timeout **

also tested on these boards (albeit with a less accurate
boottime measurement method):

seconds: before after
8349MDS ~2.6 ~2.2
8360MDS ~2.8 ~2.6
8313RDB ~2.5 ~2.3 #nand boot
837xRDB ~3.1 ~2.3

also tested on an 8323ERDB.

v2: also remove the delayed icache enablement assumption in arch ppc's
board.c, and add a CONFIG_MPC83xx define in the ITX config file for
consistency (even though it was already being defined in 83xx'
config.mk).

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

show more ...

mpc83xx: enable command line autocompletion

because it's convenient.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

Merge branch 'master' of git://git.denx.de/u-boot-arm

Conflicts:

board/davinci/da830evm/da830evm.c
board/edb93xx/sdram_cfg.c
board/esd/otc570/otc570.c
board/netstar/eeprom.c
board/netstar/eepr

Merge branch 'master' of git://git.denx.de/u-boot-arm

Conflicts:

board/davinci/da830evm/da830evm.c
board/edb93xx/sdram_cfg.c
board/esd/otc570/otc570.c
board/netstar/eeprom.c
board/netstar/eeprom_start.S
cpu/arm920t/ep93xx/timer.c
include/configs/netstar.h
include/configs/otc570.h

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx

mpc83xx: remove hardcoded network addresses from config files

and avoid e.g., two identical boards from causing random networking
conflicts when hooked up to the same network.

Signed-off-by: Kim Ph

mpc83xx: remove hardcoded network addresses from config files

and avoid e.g., two identical boards from causing random networking
conflicts when hooked up to the same network.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-arm

Conflicts:

cpu/arm_cortexa8/s5pc1xx/cache.c
include/asm-arm/arch-s5pc1xx/sys_proto.h
include/sja1000.h

Signed-off-by: Minkyu Kang <mk7.kang

Merge branch 'master' of git://git.denx.de/u-boot-arm

Conflicts:

cpu/arm_cortexa8/s5pc1xx/cache.c
include/asm-arm/arch-s5pc1xx/sys_proto.h
include/sja1000.h

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx

mpc83xx: Add NAND boot support for MPC8315E-RDB boards

The core support for NAND booting is there already, so this patch
is pretty straightforward.

There is one trick though: top level Makefile exp

mpc83xx: Add NAND boot support for MPC8315E-RDB boards

The core support for NAND booting is there already, so this patch
is pretty straightforward.

There is one trick though: top level Makefile expects nand_spl to
be in nand_spl/board/$(BOARDDIR), but we can fully reuse the code
from mpc8313erdb boards, and so to not duplicate the code we just
symlink nand_spl/board/freescale/mpc8315erdb to mpc8313erdb.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>

o silence make during ln echo
o update documentation
o and avoid:

$ ./MAKEALL MPC8315ERDB_NAND
Configuring for MPC8315ERDB board...
sdram.o: In function `fixed_sdram':
/home/r1aaha/git/u-boot/nand_spl/board/freescale/mpc8313erdb/sdram.c:72: undefined reference to `udelay'

by renaming udelay -> __udelay in the spirit of commit
3eb90bad651fab39cffba750ec4421a9c01d60e7 "Generic udelay() with watchdog
support".

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

show more ...

Merge branch 'next' of ../next

common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL

There is more and more usage of printing 64bit values,
so enable this feature generally, and delete the
CONFIG_SYS_64BIT_VSPRINT

common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL

There is more and more usage of printing 64bit values,
so enable this feature generally, and delete the
CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
defines.

Signed-off-by: Heiko Schocher <hs@denx.de>

show more ...

Merge branch 'arm/master' into arm/next

Conflicts:
board/AtmarkTechno/suzaku/Makefile
board/amcc/acadia/acadia.c
board/amcc/katmai/katmai.c
board/amcc/luan/luan.c
board/amcc/ocotea/ocotea.c
bo

Merge branch 'arm/master' into arm/next

Conflicts:
board/AtmarkTechno/suzaku/Makefile
board/amcc/acadia/acadia.c
board/amcc/katmai/katmai.c
board/amcc/luan/luan.c
board/amcc/ocotea/ocotea.c
board/cm-bf537u/Makefile
board/cray/L1/L1.c
board/csb272/csb272.c
board/csb472/csb472.c
board/eric/eric.c
board/eric/init.S
board/eukrea/cpuat91/Makefile
board/exbitgen/exbitgen.c
board/exbitgen/init.S
board/freescale/mpc8536ds/config.mk
board/g2000/g2000.c
board/jse/sdram.c
board/mpl/mip405/mip405.c
board/mpl/pip405/pip405.c
board/netstal/hcu5/hcu5.c
board/netstal/mcu25/mcu25.c
board/sc3/sc3.c
board/w7o/init.S
board/w7o/w7o.c
common/cmd_reginfo.c
cpu/ppc4xx/40x_spd_sdram.c
cpu/ppc4xx/44x_spd_ddr.c
doc/README.sbc8548
drivers/misc/fsl_law.c
fs/ubifs/ubifs.c
include/asm-ppc/immap_85xx.h

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx

mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields

some LCRR bits are not documented throughout the 83xx family RMs.
New board porters copying similar board configurati

mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields

some LCRR bits are not documented throughout the 83xx family RMs.
New board porters copying similar board configurations might omit
setting e.g., DBYP since it was not documented in their SoC's RM.

Prevent them bricking their board by retaining power on reset values
in bit fields that the board porter doesn't explicitly configure
via CONFIG_SYS_<registername>_<bitfield> assignments in the board
config file.

also move LCRR assignment to cpu_init_r[am] to help ensure no
transactions are being executed via the local bus while CLKDIV is being
modified.

also start to use i/o accessors.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

show more ...

Merge branch 'master' of /home/wd/git/u-boot/custodians

mpc83xx: accommodate larger kernel sizes by default

linux mpc83xx_defconfig kernels are getting bigger, accommodate for
their growth by adjusting default load and fdt addresses.

Signed-off-by: Kim

mpc83xx: accommodate larger kernel sizes by default

linux mpc83xx_defconfig kernels are getting bigger, accommodate for
their growth by adjusting default load and fdt addresses.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

show more ...