net/designware: add support of max-speed device tree property

This property allows to specify fastest connection mode supported by
the MAC (as opposed to features of the phy).

There are situations

net/designware: add support of max-speed device tree property

This property allows to specify fastest connection mode supported by
the MAC (as opposed to features of the phy).

There are situations when phy may handle faster modes than the
MAC (or even it's particular implementation or even due to CPU being too
slow).

This property is a standard one in Linux kernel these days and some
boards do already use it in their device tree descriptions.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Sonic Zhang <sonic.zhang@analog.com>
cc: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

net/designware: do explicit port selection for 1Gb mode

Current implementation only sets "port select" bit for non-1Gb mode.
That works fine if GMAC has just exited reset state but we may as well
ch

net/designware: do explicit port selection for 1Gb mode

Current implementation only sets "port select" bit for non-1Gb mode.
That works fine if GMAC has just exited reset state but we may as well
change connection mode in runtime. Then we'll need to reprogram GMAC for
that new mode of operation and if previous mode was 10 or 100 Mb and new
one is 1 Gb we'll need to reset port mode bit.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Sonic Zhang <sonic.zhang@analog.com>
cc: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

Fix GCC format-security errors and convert sprintfs.

With format-security errors turned on, GCC picks up the use of sprintf with
a format parameter not being a string literal.

Simple uses of sprint

Fix GCC format-security errors and convert sprintfs.

With format-security errors turned on, GCC picks up the use of sprintf with
a format parameter not being a string literal.

Simple uses of sprintf are also converted to use strcpy.

Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
Acked-by: Wolfgang Denk <wd@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>

show more ...

Merge git://git.denx.de/u-boot-dm

dm: pci: Add a dm_ prefix to pci_get_bdf()

Most driver model PCI functions have a dm_ prefix. At some point, when the
old code is converted to driver model and the old functions are removed, we
will

dm: pci: Add a dm_ prefix to pci_get_bdf()

Most driver model PCI functions have a dm_ prefix. At some point, when the
old code is converted to driver model and the old functions are removed, we
will drop that prefix.

For consistency, we should use the dm_ prefix for all driver model
functions. Update pci_get_bdf() accordingly.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

Merge git://git.denx.de/u-boot-socfpga

Conflicts:
include/configs/axs101.h

Signed-off-by: Tom Rini <trini@konsulko.com>

net: designware: Zap trailing backslash

Trailing backslashes are necessary only in macros, not in the actual
code, so remove them.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguy

net: designware: Zap trailing backslash

Trailing backslashes are necessary only in macros, not in the actual
code, so remove them.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>

show more ...

net: eth_designware: select PHYLIB in Kconfig

Select PHYLIB in drivers/net/Kconfig. And remove CONFIG_PHYLIB
from legacy board header files.

This fixed the warnings when both ALTERA_TSE and ETH_DES

net: eth_designware: select PHYLIB in Kconfig

Select PHYLIB in drivers/net/Kconfig. And remove CONFIG_PHYLIB
from legacy board header files.

This fixed the warnings when both ALTERA_TSE and ETH_DESIGNWARE
are selected.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reported-by: Pavel Machek <pavel@denx.de>
Acked-by: Chin Liang See <clsee@altera.com>
Acked-by: Pavel Machek <pavel@denx.de>
Tested-by: Pavel Machek <pavel@denx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

Merge branch 'master' of git://git.denx.de/u-boot-net

net: designware: Add driver remove support

In designware_eth_probe(), some additional resources are allocated
(eg: mdio, phy). We should free these in the driver remove phase.
Add designware_eth_rem

net: designware: Add driver remove support

In designware_eth_probe(), some additional resources are allocated
(eg: mdio, phy). We should free these in the driver remove phase.
Add designware_eth_remove() to clean it up.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...

Merge remote-tracking branch 'u-boot/master'

Merge git://git.denx.de/u-boot-x86

net: designware: Add support to PCI designware devices

The Designware ethernet controller is also seen on PCI bus, e.g.
on Intel Quark SoC. Add this support in the DM version driver.

Signed-off-by:

net: designware: Add support to PCI designware devices

The Designware ethernet controller is also seen on PCI bus, e.g.
on Intel Quark SoC. Add this support in the DM version driver.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...

net: designware: Fix build warnings

When building dm version of designware eth driver on a platform
with 64-bit phys_addr_t, it reports the following warnings:

drivers/net/designware.c: In functi

net: designware: Fix build warnings

When building dm version of designware eth driver on a platform
with 64-bit phys_addr_t, it reports the following warnings:

drivers/net/designware.c: In function 'designware_eth_probe':
drivers/net/designware.c:599:2:
warning: format '%lx' expects argument of type 'long unsigned int',
but argument 3 has type 'phys_addr_t' [-Wformat]
drivers/net/designware.c:600:21:
warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
drivers/net/designware.c:601:21:
warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]

This commit fixes the build warnings.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

net: designware: Rename the driver var name to eth_designware

The driver variable name is eth_sandbox, which is probably a copy-paste
mistake. Fix it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc:

net: designware: Rename the driver var name to eth_designware

The driver variable name is eth_sandbox, which is probably a copy-paste
mistake. Fix it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

net: designware: Add SoCFPGA GMAC DT compatible string

Add the OF compatible property to match the SoCFPGA GMAC.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.alte

net: designware: Add SoCFPGA GMAC DT compatible string

Add the OF compatible property to match the SoCFPGA GMAC.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

dm: eth: Avoid blocking on packet reception

Some devices can take a long time to work out whether they have a new packet
or now. For example the ASIX USB Ethernet dongle can take 5 seconds to do
thi

dm: eth: Avoid blocking on packet reception

Some devices can take a long time to work out whether they have a new packet
or now. For example the ASIX USB Ethernet dongle can take 5 seconds to do
this, since it waits until it gets a new packet on the wire before allowing
the USB bulk read packet to be submitted.

At present with driver mode the Ethernet receive code reads 32 packets. This
can take a very long time if we must wait for all 32 packets. The old code
(before driver model) worked by reading a single set of packets from the USB
device, then processing all the packets with in. It would be nice to use
the same behaviour with driver model.

Add a flag to the receive method which indicates that the driver should try
to find a packet if available, by consulting the hardware. When the flag is
not set, it should just return any packet data it has already received. If
there is none, it should return -EAGAIN so that the loop will terminate.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

net: designware: Program MAC address to hardware after soft reset

commit f566c99 "net: Update hardware MAC address if it changes in env"
removes writing MAC address to designware controller after so

net: designware: Program MAC address to hardware after soft reset

commit f566c99 "net: Update hardware MAC address if it changes in env"
removes writing MAC address to designware controller after soft reset.
This makes designware ethernet port fail to work. Actually the MAC
address should always be programmed after soft reset.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

Merge git://git.denx.de/u-boot-net

net: Update hardware MAC address if it changes in env

When the ethaddr changes in the env, the hardware should also be updated
so that MAC filtering will work properly without resetting U-Boot.

Als

net: Update hardware MAC address if it changes in env

When the ethaddr changes in the env, the hardware should also be updated
so that MAC filtering will work properly without resetting U-Boot.

Also remove the manual calls to set the hwaddr that was included in a
few drivers as a result of the framework not doing it.

Reported-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>

show more ...

Merge branch 'u-boot/master' into 'u-boot-arm/master'

dm: net: Adjust designware driver to support driver model

Add driver model support to the designware driver. This reuses most of the
existing code except for some duplication in the probe() method.

dm: net: Adjust designware driver to support driver model

Add driver model support to the designware driver. This reuses most of the
existing code except for some duplication in the probe() method.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

dm: net: Tidy up designware driver ready for driver model

Adjust the error handling to use errno.h instead of returning -1. Change
leaf functions to pass in the arguments they require rather than st

dm: net: Tidy up designware driver ready for driver model

Adjust the error handling to use errno.h instead of returning -1. Change
leaf functions to pass in the arguments they require rather than struct
eth_device. Apart from simplifying the code it makes is easier to reuse
these functions for driver model, since mostly they actually only use
struct dw_eth_priv (which we can keep).

Create a stub for each Ethernet operation function. This will allow use to
share code with the driver model versions.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...