Merge branch 'master' of git://git.denx.de/u-boot-marvell

ide: add mvsata_ide driver

This driver only provides initialization code; actual driving
is done by cmd_ide.c using the ATA compatibility mode of the
Marvell SATAHC controller.

Signed-off-by: Alber

ide: add mvsata_ide driver

This driver only provides initialization code; actual driving
is done by cmd_ide.c using the ATA compatibility mode of the
Marvell SATAHC controller.

Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>

show more ...

ide: reorder object files alphabetically

Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>

Canyonlands SATA harddisk driver

This patch adds a SATA harddisk driver for the canyonlands.
This patch is kernel driver's porting.
This patch corresponded to not cmd_scsi but cmd_sata.
This patch d

Canyonlands SATA harddisk driver

This patch adds a SATA harddisk driver for the canyonlands.
This patch is kernel driver's porting.
This patch corresponded to not cmd_scsi but cmd_sata.
This patch divided an unused member with ifndef __U_BOOT__ in the structure.

[environment variable, boot script]
setenv bootargs root=/dev/sda7 rw
setenv bootargs ${bootargs} console=ttyS0,115200
ext2load sata 0:2 0x400000 /canyonlands/uImage
ext2load sata 0:2 0x800000 /canyonlands/canyonlands.dtb
fdt addr 0x800000 0x4000
bootm 0x400000 - 0x800000

If you drive SATA-2 disk on Canyonlands, you must change parts from
PI2PCIE212 to PI2PCIE2212 on U25. We confirmed to boot by using
following disks:

1.Vendor: Fujitsu Type: MHW2040BS
2.Vendor: Fujitsu Type: MHW2060BK
3.Vendor: HAGIWARA SYS-COM:HFD25S-032GT
4.Vendor: WesternDigital Type: WD3200BJKT (CONFIG_LBA48 required)
5.Vendor: WesternDigital Type: WD3200BEVT (CONFIG_LBA48 required)
6.Vendor: Hitachi Type: HTS543232L9A300 (CONFIG_LBA48 required)
7.Vendor: Seagate Type: ST31000333AS (CONFIG_LBA48 required)
8.Vendor: Transcend Type: TS32GSSD25S-M
9.Vendor: MTRON Type: MSD-SATA1525-016

Signed-off-by: Kazuaki Ichinohe <kazuichi at fsi.co.jp>

show more ...

mflash: Initial mflash support

Mflash is fusion memory device mainly targeted consumer eletronic and
mobile phone.
Internally, it have nand flash and other hardware logics and supports
some differen

mflash: Initial mflash support

Mflash is fusion memory device mainly targeted consumer eletronic and
mobile phone.
Internally, it have nand flash and other hardware logics and supports
some different operation (ATA, IO, XIP) modes.

IO mode is custom mode for the host that doesn't have IDE interface.
(Many mobile targeted SoC doesn't have IDE bus)

This driver support mflash IO mode.

Followings are brief descriptions about IO mode.

1. IO mode based on ATA protocol and uses some custom command. (read
confirm, write confirm)
2. IO mode uses SRAM bus interface.

Signed-off-by: unsik Kim <donari75@gmail.com>

show more ...

Blackfin: add driver for on-chip ATAPI controller

This is a port of the Linux Blackfin on-chip ATAPI driver to U-Boot.

Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com>
Signed-off-by: Mike Frysin

Blackfin: add driver for on-chip ATAPI controller

This is a port of the Linux Blackfin on-chip ATAPI driver to U-Boot.

Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

show more ...

Merge branch 'master' of /home/stefan/git/u-boot/u-boot into next

Merge branch 'Makefile' of git://git.denx.de/u-boot-arm

drivers/block: Move conditional compilation to Makefile

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Merge commit 'wd/master'

Merge branch 'master' of git://www.denx.de/git/u-boot

Merge branch 'master' of /home/stefan/git/u-boot/u-boot

Merge branch 'master' of ssh+git://mercury.denx.de/home/wd/git/u-boot/master

Conflicts:

board/amirix/ap1000/serial.c
board/exbitgen/exbitgen.c
board/exbitgen/flash.c
board/ml2/serial.c
board/x

Merge branch 'master' of ssh+git://mercury.denx.de/home/wd/git/u-boot/master

Conflicts:

board/amirix/ap1000/serial.c
board/exbitgen/exbitgen.c
board/exbitgen/flash.c
board/ml2/serial.c
board/xilinx/ml300/serial.c

Signed-off-by: Wolfgang Denk <wd@denx.de>

show more ...

Add sata sil3114 support

Signed-off-by: Tor Krill <tor@excito.com>

Merge commit 'wd/master'

Merge branch 'master' of /home/stefan/git/u-boot/u-boot

Big white-space cleanup.

This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print st

Big white-space cleanup.

This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print statements).

Also remove all embedded "vim:" and "vi:" statements which hide
indentation problems.

Signed-off-by: Wolfgang Denk <wd@denx.de>

show more ...

Merge git://www.denx.de/git/u-boot into uboot

drivers: add the support for Freescale SATA controller

Add the Freescale on-chip SATA controller driver to u-boot,
The SATA controller is used on the 837x and 8315 targets,
The driver can be used to

drivers: add the support for Freescale SATA controller

Add the Freescale on-chip SATA controller driver to u-boot,
The SATA controller is used on the 837x and 8315 targets,
The driver can be used to load kernel, fs and dtb.

The features list:
- 1.5/3 Gbps link speed
- LBA48, LBA28 support
- DMA and FPDMA support
- Two ports support

Signed-off-by: Dave Liu <daveliu@freescale.com>

show more ...

ata: add the libata support

add simple libata support in u-boot

Signed-off-by: Dave Liu <daveliu@freescale.com>

Merge git://www.denx.de/git/u-boot

Conflicts:

board/tqm5200/tqm5200.c

Merge with git://www.denx.de/git/u-boot.git

Merge commit 'u-boot/master' into for-1.3.1

Conflicts:

drivers/rtc/Makefile

Merge commit 'wd/master'

Merge git://www.denx.de/git/u-boot

Conflicts:

drivers/Makefile