| ad734f7d | 22-Jan-2015 |
Masahiro Yamada <yamada.m@jp.panasonic.com> |
powerpc: mpc5xxx: remove Total5200 board support
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> |
| 5344cc1a | 22-Jan-2015 |
Masahiro Yamada <yamada.m@jp.panasonic.com> |
powerpc: ppc4xx: remove PPChameleonEVB, CATcenter boards
These boards are still non-generic boards.
It is a good thing that we can drop board-specific hack code
from drivers/mtd/nand/nand_base.c
S
powerpc: ppc4xx: remove PPChameleonEVB, CATcenter boards
These boards are still non-generic boards.
It is a good thing that we can drop board-specific hack code
from drivers/mtd/nand/nand_base.c
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Stefan Roese <sr@denx.de>
Cc: Andrea "llandre" Marson <andrea.marson@dave-tech.it>
show more ...
|
| 168dcc6c | 22-Jan-2015 |
Masahiro Yamada <yamada.m@jp.panasonic.com> |
powerpc: mpc85xx: remove P2020DS board support
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> |
| 89123536 | 22-Jan-2015 |
Masahiro Yamada <yamada.m@jp.panasonic.com> |
powerpc: mpc85xx: remove P2020COME board support
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Ira W. Snyder <iws@ovro.caltech.edu> |
| 743d4815 | 22-Jan-2015 |
Masahiro Yamada <yamada.m@jp.panasonic.com> |
powerpc: mpc85xx: remove P1_P2_RDB boards
These boards are still non-generic boards:
P1011RDB, P1022RDB, P2010RDB, P2020RDB
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Poonam Agg
powerpc: mpc85xx: remove P1_P2_RDB boards
These boards are still non-generic boards:
P1011RDB, P1022RDB, P2010RDB, P2020RDB
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Poonam Aggrwal <poonam.aggrwal@freescale.com>
show more ...
|
| 8d1e3cb1 | 22-Jan-2015 |
Masahiro Yamada <yamada.m@jp.panasonic.com> |
powerpc: mpc83xx: remove MPC8360ERDK, EMPC8360EMDS support
These boards are still non-generic boards.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Dave Liu <daveliu@freescale.com>
powerpc: mpc83xx: remove MPC8360ERDK, EMPC8360EMDS support
These boards are still non-generic boards.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Dave Liu <daveliu@freescale.com>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
show more ...
|
| 6706b115 | 12-Jan-2015 |
Codrin Ciubotariu <codrin.ciubotariu@freescale.com> |
net/vsc9953: Add driver for Vitesse VSC9953 L2 Switch IP
This patch adds a driver for VSC9953 L2 Switch. This Vitesse IP
is integrated in Freescale T1040 and T1020 SoCs.
The L2 switch has 10 Etherne
net/vsc9953: Add driver for Vitesse VSC9953 L2 Switch IP
This patch adds a driver for VSC9953 L2 Switch. This Vitesse IP
is integrated in Freescale T1040 and T1020 SoCs.
The L2 switch has 10 Ethernet ports: 2 internal fixed-links
(ports 8 and 9) at 2.5 Gbps and and 8 external ports at 1 Gbps.
The external ports may be connected to PHYs over QSGMII and SGMII.
Commands have also been added to enable/disable a port and to
check a port's link speed, duplexity and status. The commands are:
ethsw port <port_nr> enable|disable - enable/disable an l2 switch port
ethsw port <port_nr> show - show an l2 switch port's configuration
port_nr=0..9; use "all" for all ports
For more detailse please see doc/README.t1040-l2switch
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: York Sun <yorksun@freescale.com>
show more ...
|
| ab77f241 | 15-Jan-2015 |
Tom Rini <trini@ti.com> |
Merge branch 'master' of git://git.denx.de/u-boot-ti |
| d928664f | 15-Jan-2015 |
Masahiro Yamada <yamada.m@jp.panasonic.com> |
powerpc: 74xx_7xx: remove 74xx_7xx cpu support
All the 74xx_7xx boards are still non-generic boards:
P3G4, ZUMA, ppmc7xx, ELPPC, mpc7448hpc2
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Stefan R
powerpc: 74xx_7xx: remove 74xx_7xx cpu support
All the 74xx_7xx boards are still non-generic boards:
P3G4, ZUMA, ppmc7xx, ELPPC, mpc7448hpc2
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: York Sun <yorksun@freescale.com>
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Nye Liu <nyet@zumanetworks.com>
Cc: Roy Zang <tie-fei.zang@freescale.com>
show more ...
|
| 421044b1 | 14-Jan-2015 |
Michal Simek <michal.simek@xilinx.com> |
doc: ARM: Use the right function name
Trivial fix.
Signed-off-by: Michal Simek <michal.simek@xilinx.com> |
| ac8192a5 | 14-Jan-2015 |
Masahiro Yamada <yamada.m@jp.panasonic.com> |
README.scrapyard: fill commit and date fields
This commit was generated by the following command:
scripts/fill_scrapyard.py
The commit-ID of CPCIISER4 removal has been fixed by hand because
th
README.scrapyard: fill commit and date fields
This commit was generated by the following command:
scripts/fill_scrapyard.py
The commit-ID of CPCIISER4 removal has been fixed by hand because
the board was removed by commit 370572601027 (ppc4xx: remove CPCIISER4
board), but it was added to README.scrapyard by commit 9a4018e09a2f
(ppc4xx: remove DP405 board).
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
show more ...
|
| 7fad8a98 | 28-Dec-2014 |
Hans de Goede <hdegoede@redhat.com> |
sunxi: video: Add a hpd_delay parameter to configure hpd delay
In some extreme cases it may be necessary to wait 1.5 seconds or more for a hpd
signal to show up (and be able to read edid info), but
sunxi: video: Add a hpd_delay parameter to configure hpd delay
In some extreme cases it may be necessary to wait 1.5 seconds or more for a hpd
signal to show up (and be able to read edid info), but we do not want to
penalize all headless boots with an extra second boot delay, so add a hpd_delay
parameter which can be set through the video-mode env. variable.
While at it raise the default from 300ms to 500ms as 300 may very well be too
low in many cases.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
show more ...
|
| 49d2703d | 25-Dec-2014 |
Hans de Goede <hdegoede@redhat.com> |
sunxi: video: Fallback from HDMI to VGA on boards with VGA
If a board has no LCD, but does have VGA fallback to VGA when no HDMI cable
is connected (unless hpd=0).
Signed-off-by: Hans de Goede <hde
sunxi: video: Fallback from HDMI to VGA on boards with VGA
If a board has no LCD, but does have VGA fallback to VGA when no HDMI cable
is connected (unless hpd=0).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
show more ...
|
| 2dae800f | 21-Dec-2014 |
Hans de Goede <hdegoede@redhat.com> |
sunxi: video: Add lcd output support
Add lcd output support, see the new Kconfig entries and doc/README.video for
how to enable / configure this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
sunxi: video: Add lcd output support
Add lcd output support, see the new Kconfig entries and doc/README.video for
how to enable / configure this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
show more ...
|
| 5f88ed5c | 13-Jan-2015 |
Tom Rini <trini@ti.com> |
Merge git://git.denx.de/u-boot-x86 |
| c316f577 | 25-Jun-2014 |
Daniel Mack <zonque@gmail.com> |
mtd: OMAP: Enable GPMC prefetch mode
Enable GPMC's prefetch feature for NAND access. This speeds up NAND read
access a lot by pre-fetching contents in the background and reading them
through the FIF
mtd: OMAP: Enable GPMC prefetch mode
Enable GPMC's prefetch feature for NAND access. This speeds up NAND read
access a lot by pre-fetching contents in the background and reading them
through the FIFO address.
The current implementation has two limitations:
a) it only works in 8-bit mode
b) it only supports read access
Both is easily fixable by someone who has hardware to implement it.
Note that U-Boot code uses non word-aligned buffers to read data into, and
request read lengths that are not multiples of 4, so both partial buffers
(head and tail) have to be addressed.
Tested on AM335x hardware.
Tested-by: Guido Martínez <guido@vanguardiasur.com.ar>
Reviewed-by: Guido Martínez <guido@vanguardiasur.com.ar>
Signed-off-by: Daniel Mack <zonque@gmail.com>
[trini: Make apply again, use 'cs' fix pointed out by Guido]
Signed-off-by: Tom Rini <trini@ti.com>
show more ...
|
| 617b867f | 06-Jan-2015 |
Bin Meng <bmeng.cn@gmail.com> |
x86: Update README.x86 for coreboot support
Update README.x86 to include new build instructions for U-Boot as
the coreboot payload and testing considerations with coreboot.
Signed-off-by: Bin Meng
x86: Update README.x86 for coreboot support
Update README.x86 to include new build instructions for U-Boot as
the coreboot payload and testing considerations with coreboot.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
show more ...
|
| cb3b2e62 | 01-Jan-2015 |
Simon Glass <sjg@chromium.org> |
x86: Add an 'mtrr' command to list and adjust MTRRs
It is useful to be able to see the MTRR setup in U-Boot. Add a command
to list the state of the variable MTRR registers and allow them to be
chang
x86: Add an 'mtrr' command to list and adjust MTRRs
It is useful to be able to see the MTRR setup in U-Boot. Add a command
to list the state of the variable MTRR registers and allow them to be
changed.
Update the documentation to list some of the available commands.
This does not support fixed MTRRs as yet.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
show more ...
|
| 5f1459dc | 12-Jan-2015 |
Matthias Fuchs <matthias.fuchs@esd.eu> |
ppc4xx: remove some CPCI405 variants
only keep CPCI4052
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> |
| 5f8f6294 | 12-Jan-2015 |
Matthias Fuchs <matthias.fuchs@esd.eu> |
ppc4xx: remove G2000 board
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> |
| fc88a5bf | 12-Jan-2015 |
Matthias Fuchs <matthias.fuchs@esd.eu> |
ppc4xx: remove WUH405 board
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> |
| 807db88b | 12-Jan-2015 |
Matthias Fuchs <matthias.fuchs@esd.eu> |
ppc4xx: remove VOH405 board
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> |
| d5263304 | 12-Jan-2015 |
Matthias Fuchs <matthias.fuchs@esd.eu> |
ppc4xx: remove PMC405 board
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> |
| dbe7bb0d | 12-Jan-2015 |
Matthias Fuchs <matthias.fuchs@esd.eu> |
ppc4xx: remove PCI405 board
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> |
| cc6e715f | 12-Jan-2015 |
Matthias Fuchs <matthias.fuchs@esd.eu> |
ppc4xx: remove OCRTC board
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> |