doc: dt-bindings: Describe Freescale TSEC ethernet controller

Adapted from the same file name in the kernel device tree bindings
documentation, to use with U-Boot.

Signed-off-by: Bin Meng <bmeng.cn

doc: dt-bindings: Describe Freescale TSEC ethernet controller

Adapted from the same file name in the kernel device tree bindings
documentation, to use with U-Boot.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

drivers: net: vsc9953: Add LAG support

You can now configure LAG on VSC9953's ports using the command:
ethsw [port <port_no>] aggr {[help] | show | <lag_group_no>}

A port must belong to a single LA

drivers: net: vsc9953: Add LAG support

You can now configure LAG on VSC9953's ports using the command:
ethsw [port <port_no>] aggr {[help] | show | <lag_group_no>}

A port must belong to a single LAG. By default, a port
belongs to a LAG equal to the port's number.

For each frame, a hash will be calculated based on
Source/Destination MAC addresses, Source/Destination IP(v4/v6)
addresses, Source/Destination ports. This hash will be used to
select a single egress port from LAG. This also assures
that frames from the same flow will always have the
same egress port.

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

doc: t1040-l2switch: Update README

The driver for VSC9953 L2 switch IP supports many features and
the documentation needs to be updated.

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescal

doc: t1040-l2switch: Update README

The driver for VSC9953 L2 switch IP supports many features and
the documentation needs to be updated.

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-x86

x86: baytrail: Add option to disable the internal UART to setup_early_uart()

This patch adds a parameter to the function setup_early_uart() to either
enable or disable the internal BayTrail legacy U

x86: baytrail: Add option to disable the internal UART to setup_early_uart()

This patch adds a parameter to the function setup_early_uart() to either
enable or disable the internal BayTrail legacy UART. Since the name
setup_early_uart() does not match its functionality any more, lets
rename it to setup_internal_uart() as well in this patch.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

x86: baytrail: Add documentation for FSP memory-down values

This patch adds the documentation for the memory-down parameters
of the Intel FSP. To configure a board without SPD DDR DIMM but
with onbo

x86: baytrail: Add documentation for FSP memory-down values

This patch adds the documentation for the memory-down parameters
of the Intel FSP. To configure a board without SPD DDR DIMM but
with onboard DDR chips. The values are taken from the coreboot
header:

src/soc/intel/fsp_baytrail/chip.h

(git ID da1a70ea from 2016-01-16 as reference).

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Andrew Bradford <andrew.bradford@kodakalaris.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

serial: uartlite: Move driver to DM

Enable SPL DM too.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Thomas Chou <thomas@wytron.com.tw>

ns16550: replace with binding files from Linux kernel

Replace ns16550.txt with binding files from Linux kernel. As suggested
by Stephen Warren, we should keep the directory structure, filenames,
and

ns16550: replace with binding files from Linux kernel

Replace ns16550.txt with binding files from Linux kernel. As suggested
by Stephen Warren, we should keep the directory structure, filenames,
and file content identical to the bindings in the Linux kernel.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

rockchip: Update the README

GPIO, I2C, LCD and HDMI are now implemented. We have more than one PMIC.
There is an implementation to run the CPU at full speed although it does
not seem to make much di

rockchip: Update the README

GPIO, I2C, LCD and HDMI are now implemented. We have more than one PMIC.
There is an implementation to run the CPU at full speed although it does
not seem to make much difference.

Update the README to cover recent developments.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

rockchip: Add support for Raxda Rock 2

This board includes an RK3288 SoC on a SOM. It can be mounted on a
base-board which provides a wide range of peripherals.

So far this is verified to boot to a

rockchip: Add support for Raxda Rock 2

This board includes an RK3288 SoC on a SOM. It can be mounted on a
base-board which provides a wide range of peripherals.

So far this is verified to boot to a prompt from a microSD card. The serial
console works as well as HDMI.

Thanks to Tom Cubie for sending me a board.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

rockchip: Add a script to parse datasheets

This script has proved useful for parsing datasheets and creating register
shift/mask values for use in header files. Include it in case it is useful
for o

rockchip: Add a script to parse datasheets

This script has proved useful for parsing datasheets and creating register
shift/mask values for use in header files. Include it in case it is useful
for others.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

dts: Bring in pinctrl device tree binding

Add this binding file since we now use it in U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>

serial: lpuart: Add driver model serial support

This adds driver model support to lpuart serial driver.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Bhuvanchandra DV <bhuvanchandra.dv@tor

serial: lpuart: Add driver model serial support

This adds driver model support to lpuart serial driver.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Tested-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>

show more ...

dm: timer: uclass: add timer init in uclass driver to add timer device

Adding timer init function in timer-uclass driver to create and
initialize the timer device on platforms where u-boot,dm-pre-re

dm: timer: uclass: add timer init in uclass driver to add timer device

Adding timer init function in timer-uclass driver to create and
initialize the timer device on platforms where u-boot,dm-pre-reloc
is not used. Since there will be multiple timer devices in the
system, adding a tick-timer node in chosen node to know which
timer device to be used as tick timer in u-boot.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>

show more ...

armv8: New MMU setup code allowing to use 48+ bits PA/VA

This patch adds code which sets up 2-level page tables on ARM64 thus
extending available VA space. CPUs implementing 64k translation
granule

armv8: New MMU setup code allowing to use 48+ bits PA/VA

This patch adds code which sets up 2-level page tables on ARM64 thus
extending available VA space. CPUs implementing 64k translation
granule are able to use direct PA-VA mapping of the whole 48 bit
address space.
It also adds the ability to reset the SCTRL register at the very beginning
of execution to avoid interference from stale mappings set up by early
firmware/loaders/etc.

Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com>
Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-x86

x86: qemu: add documentaion for the fw_cfg interface

Document the usage of 'qfw' command

Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin

x86: qemu: add documentaion for the fw_cfg interface

Document the usage of 'qfw' command

Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

ARM: uniphier: fix recommended board setting in document

The mem_is_flash() in arch/arm/mach-uniphier/micro-support_card.c
writes/reads the tail of each NOR flash bank to check if the device
really

ARM: uniphier: fix recommended board setting in document

The mem_is_flash() in arch/arm/mach-uniphier/micro-support_card.c
writes/reads the tail of each NOR flash bank to check if the device
really resides there.

If CS1_SPLIT were enabled, the support card would always require two
NOR flash devices to be inserted for the correct NOR detection.
This is not probably what we want.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

rockchip: Fix the configuration for chromebook_jerry

Various updates did not make it through to this board. Also the instructions
for building a SPI image are no-longer correct. Fix these so that Je

rockchip: Fix the configuration for chromebook_jerry

Various updates did not make it through to this board. Also the instructions
for building a SPI image are no-longer correct. Fix these so that Jerry can
boot to a prompt again.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'master' of git://www.denx.de/git/u-boot-imx

imx_common: check for Serial Downloader in spl_boot_device

Check for bmode before reading the boot device
to check if a serial downloader is started,
and returns UART if the serial downloader is set

imx_common: check for Serial Downloader in spl_boot_device

Check for bmode before reading the boot device
to check if a serial downloader is started,
and returns UART if the serial downloader is set,
letting SPL to wait for an image if
CONFIG_SPL_YMODEM_SUPPORT is set.

This allows to load again a SPL based board
with imx_usb_loader together with a tool
such as kermit.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Tim Harvey <tharvey@gateworks.com>
CC: Fabio Estevam <Fabio.Estevam@freescale.com>
CC: Eric Nelson <eric.nelson@boundarydevices.com>
Reviewed-by: Eric Nelson <eric@nelint.com>
Tested-by: Eric Nelson <eric@nelint.com>

show more ...

ARM: uniphier: rename rest of defconfig files

Rename rest of defconfig files of UniPhier SoC family to have the
prefix uniphier_.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

ARM: uniphier: support ProXstream2, PH1-LD6b boards in single defconfig

These boards are similar enough to be supported in a single defconfig
file. Distinguish one from another by "DEVICE_TREE" fro

ARM: uniphier: support ProXstream2, PH1-LD6b boards in single defconfig

These boards are similar enough to be supported in a single defconfig
file. Distinguish one from another by "DEVICE_TREE" from the command
line. The how-to-build in doc/README.uniphier should be also updated.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

ARM: uniphier: merge ph1_ld4_defconfig and ph1_sld8_defconfig

These two are similar enough to be merged into a single
defconfig file. Distinguish one from another by "DEVICE_TREE"
from the command

ARM: uniphier: merge ph1_ld4_defconfig and ph1_sld8_defconfig

These two are similar enough to be merged into a single
defconfig file. Distinguish one from another by "DEVICE_TREE"
from the command line. The how-to-build in doc/README.uniphier
should be also updated.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

x86: Remove Graeme Russ from the git alias file

As requested, remove Graeme's email address.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Bin Meng <bmeng.cn@gmail.com>