rk3288: vyasa: Add TPL support

Since the size of SPL can't be exceeded 0x8000 bytes in RK3288,
it is not possible add new SPL features like Falcon mode or etc.

So add TPL stage so-that adding new f

rk3288: vyasa: Add TPL support

Since the size of SPL can't be exceeded 0x8000 bytes in RK3288,
it is not possible add new SPL features like Falcon mode or etc.

So add TPL stage so-that adding new features to SPL is possible.
- TPL: DRAM init, clocks
- SPL: MMC, falcon, etc

Change-Id: I8e570e6a552b37dbe7e3c9cc879f70ff64f2354e
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
(update tpl text base, add memcpy/memset back)
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
(cherry picked from commit 532cb7f5ada0cc3779c33606d760ec99f6aa847a)

show more ...

UPSTREAM: doc: overlays: Tweak documentation regarding overlays

Pull some information regarding overlays from commit messages and
put them directly within the documentation. Also add some informatio

UPSTREAM: doc: overlays: Tweak documentation regarding overlays

Pull some information regarding overlays from commit messages and
put them directly within the documentation. Also add some information
regarding required dtc version to properly use overlays.

Change-Id: Idccfd1db39dd27a19415f05738e65ca43413cb25
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
(cherry picked from commit 56fc7032e1771882a086e8283586fc7c733ba6bd)

show more ...

UPSTREAM: doc: Document how to apply fdt overlays

We have the capability to apply overlays on the command line but
we didn't have a document explaining how.

Change-Id: Idec1c3eac1ef3b52f4329d2ce9bf

UPSTREAM: doc: Document how to apply fdt overlays

We have the capability to apply overlays on the command line but
we didn't have a document explaining how.

Change-Id: Idec1c3eac1ef3b52f4329d2ce9bffdd8b9aac32b
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Reviewed-by: Łukasz Majewski
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
(cherry picked from commit d80162cfc559491dee3009b120e7268e9388302f)

show more ...

UPSTREAM: fit: fdt overlays doc

Change-Id: I69e26ac5683578d8a3333e33e94b65556af479bb
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Reviewed-by: Łukasz Majewski
Acked-by: Simon Gl

UPSTREAM: fit: fdt overlays doc

Change-Id: I69e26ac5683578d8a3333e33e94b65556af479bb
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Reviewed-by: Łukasz Majewski
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
(cherry picked from commit 6b54e50b5a5889efe179cb06aa6aa25583ef25d5)

show more ...

UPSTREAM: patman: add support for omitting bouncing addresses

Add support for reading a list of bouncing addresses from a in-tree file
(doc/bounces) and from the ~/.patman config file. These address

UPSTREAM: patman: add support for omitting bouncing addresses

Add support for reading a list of bouncing addresses from a in-tree file
(doc/bounces) and from the ~/.patman config file. These addresses are
stripped from the Cc list.

Change-Id: I0b4b4107a579b344034c750d63b838ef7960f96e
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com <mailto:philipp.tomsich@theobroma-systems.com>>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
(cherry picked from commit e11aa602abd3e8007dfd3ed23ebb829101abcfec)

show more ...

UPSTREAM: spl: fit: Add booting OS first

If CONFIG_SPL_OS_BOOT is enabled, boot OS if kernel image is found
in FIT structure.

Change-Id: I6fcb0a0ac05e4d548b2bce93f9def04c12294998
Signed-off-by: Yor

UPSTREAM: spl: fit: Add booting OS first

If CONFIG_SPL_OS_BOOT is enabled, boot OS if kernel image is found
in FIT structure.

Change-Id: I6fcb0a0ac05e4d548b2bce93f9def04c12294998
Signed-off-by: York Sun <york.sun@nxp.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
(cherry picked from commit c8bc3c0c9ff7ce649b2af1416919b50ecf504874)

show more ...

UPSTREAM: spl: fit: Support both external and embedded data

SPL supports U-Boot image in FIT format which has data outside of
FIT structure. This adds support for embedded data for normal FIT
images

UPSTREAM: spl: fit: Support both external and embedded data

SPL supports U-Boot image in FIT format which has data outside of
FIT structure. This adds support for embedded data for normal FIT
images.

Change-Id: Iad87ee9d443259a6af53f0473dc1b97db083df8d
Signed-off-by: York Sun <york.sun@nxp.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
(cherry picked from commit 5fd13d973613d308663f97b51059ecd9179baf09)

show more ...

UPSTREAM: rockchip: rk3188: use boot0 hook to load up SPL in 2 steps

For the RK3188, the BROM will attempt to load up the first stage
image (SPL for the RK3188) in two steps: first 1KB to offset 0x8

UPSTREAM: rockchip: rk3188: use boot0 hook to load up SPL in 2 steps

For the RK3188, the BROM will attempt to load up the first stage
image (SPL for the RK3188) in two steps: first 1KB to offset 0x800
in the SRAM and then the remainder to offset 0xc00 in the SRAM.
It always enters at 0x804, though.

With this changeset, the RK3188 boot removes the TPL (stub) stage and
builds a single SPL binary that utilizes the early back-to-bootrom via
the boot0-hook.

Consequently, the passing of the saved boot params via pmu->os_reg[2]
is also removed.

Change-Id: I1ced867bbf232db323cf7be95cc6653bc3b50ea6
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>

show more ...

rockchip: doc: update U-Boot location info

Update rockchip U-Boot location to 0x4000/16384.

Change-Id: I0801911a7baca9a7d374c0e1b5b1dddb194fb622
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>

drivers: rknand: add nand flash drivers for Rockchip SoC

This patch add the nand flash support for Rockchip Soc(RK3128, RK3126x,
RK3188, Rk3229 etc).

Change-Id: I35ea09f0714b303b247a97ed13cc6e0e566

drivers: rknand: add nand flash drivers for Rockchip SoC

This patch add the nand flash support for Rockchip Soc(RK3128, RK3126x,
RK3188, Rk3229 etc).

Change-Id: I35ea09f0714b303b247a97ed13cc6e0e56675a0e
Signed-off-by: Yifeng Zhao <zyf@rock-chips.com>

show more ...

dtoc: Rename the phandle struct

Rather than naming the phandle struct according to the number of cells it
uses (e.g. struct phandle_2_cell) name it according to the number of
arguments it has (e.g.

dtoc: Rename the phandle struct

Rather than naming the phandle struct according to the number of cells it
uses (e.g. struct phandle_2_cell) name it according to the number of
arguments it has (e.g. struct phandle_1_arg). This is a more intuitive
naming.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

rockchip:usb: add a simple readme for rockusb

add a simple readme to introduce rockusb and tell people how to use it

Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com>
Reviewed-by: Simon Glass <s

rockchip:usb: add a simple readme for rockusb

add a simple readme to introduce rockusb and tell people how to use it

Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Changes in v7:
-none

Changes in v6:
-none

Changes in v5:
-none

Changes in v4:
-add some blank line to make it look better

Changes in v3:
-fix checkpatch error

show more ...

usb: doc: update README.usb for new config options

A number of the config options for USB networking have been migrated to
Kconfig. Update README.usb to reflect this.

Signed-off-by: Chris Packham <

usb: doc: update README.usb for new config options

A number of the config options for USB networking have been migrated to
Kconfig. Update README.usb to reflect this.

Signed-off-by: Chris Packham <judge.packham@gmail.com>

show more ...

doc: remove duplicate text in README.gpt

Signed-off-by: Alison Chaiken <alison@she-devel.com>

Merge git://git.denx.de/u-boot-dm

git: mailrc: Update e-mail address

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Add livetree documentation

Add some documentation for the live device tree support in U-Boot. This
was missing from the initial series.

Signed-off-by: Simon Glass <sjg@chromium.org>
Sugge

dm: core: Add livetree documentation

Add some documentation for the live device tree support in U-Boot. This
was missing from the initial series.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Łukasz Majewski <lukma@denx.de>

show more ...

dm: Add migration plan for CONFIG_BLK

The CONFIG_BLK conversion involves quite invasive changes in the U-Boot
code, with #ifdefs and different code paths. We should try to move over to
this soon so

dm: Add migration plan for CONFIG_BLK

The CONFIG_BLK conversion involves quite invasive changes in the U-Boot
code, with #ifdefs and different code paths. We should try to move over to
this soon so we can drop the old code.

Set a deadline of 9 months for this work, rounded up to the next release.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

show more ...

Convert CONFIG_BCH to Kconfig

This converts the following to Kconfig:
CONFIG_BCH

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

Merge git://git.denx.de/u-boot-imx

Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
configs/imx6qdl_icore_mmc_defconfig
configs/imx6qdl_icore_rqs_defconfig

nvme: Adjust the 'nvme' command to use blk_common_cmd()

Instead of having separate code in the 'nvme' command, adjust it to use
the common function.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

Merge git://git.denx.de/u-boot-i2c

doc: verified-boot: fix typos

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

cmd: spl: provide address and size of prepared FDT in environment

Writing prepared FDT to persistent storage should be possible in
scripts. Create environment variables containing address and size
o

cmd: spl: provide address and size of prepared FDT in environment

Writing prepared FDT to persistent storage should be possible in
scripts. Create environment variables containing address and size
of the updated FDT. Scripts can use these variables after running
'spl export fdt ...' command to write the new blob to persistent
storage.

Signed-off-by: Anatolij Gustschin <agust@denx.de>

show more ...

doc: add Serial Download Protocol documentation

Document the U-Boot Serial Download Protocol implementation and
some typical use cases.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Review

doc: add Serial Download Protocol documentation

Document the U-Boot Serial Download Protocol implementation and
some typical use cases.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Reviewed-by: Łukasz Majewski <lukma@denx.de>

show more ...