Remove lh7a40x cpu and serial driver

Since commit 957731ed (ARM: remove broken "lpd7a40x" boards),
lh7a40x cpu and serial driver have become unused. Remove them.

Signed-off-by: Albert ARIBAUD <albe

Remove lh7a40x cpu and serial driver

Since commit 957731ed (ARM: remove broken "lpd7a40x" boards),
lh7a40x cpu and serial driver have become unused. Remove them.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>

show more ...

kerneldoc: Add myself to the git-mailrc for kerneldoc

Add entry for kerneldoc into the git-mailrc pointing to the U-Boot ML
and myself.

Signed-off-by: Marek Vasut <marex@denx.de>

kerneldoc: Add nicer CSS stylesheet for HTML docs

Import basic CSS stylesheet for the HTML documentation. The base for
the stylesheet is taken from:

http://ds9a.nl/docbook/minimal-page.html

I cus

kerneldoc: Add nicer CSS stylesheet for HTML docs

Import basic CSS stylesheet for the HTML documentation. The base for
the stylesheet is taken from:

http://ds9a.nl/docbook/minimal-page.html

I customized the CSS a bit further, for example to add curvy corners
to example section and change the tint of gray. The HTML documentation
does not look that crude anymore.

Signed-off-by: Marek Vasut <marex@denx.de>

show more ...

kerneldoc: Implant DocBook from Linux kernel

Pull slightly modified version of Documentation/DocBook, the related perl
script scripts/kernel-doc and the scripts/docproc.c from Linux kernel and
impla

kerneldoc: Implant DocBook from Linux kernel

Pull slightly modified version of Documentation/DocBook, the related perl
script scripts/kernel-doc and the scripts/docproc.c from Linux kernel and
implant it into U-Boot. This will allow smooth generation of kerneldoc
style documentation.

It was necessary to modify the DocBook/Makefile to work with U-Boot build
system. The changes were only minor though and involved replacing the kbuild
specific parts.

It was also necessary to replace use of variables like KERNEL_VERSION with
U_BOOT_VERSION, strings like Linux kernel with U-Boot Bootloader etc. so
the generated result actually matches.

Finally, it was necessary to adjust docproc.c, since the documentation in
U-Boot is located in doc/DocBook instead of Documentation/DocBook as is in
case of the Linux kernel.

Some parts of the DocBook Makefile are unused, but to allow easier sync with
Linux kernel, these parts are still left in. The targets enabled now are
"htmldocs" "pdfdocs" "psdocs" "xmldocs" and "cleandocs" to remove the results
of documentation build.

Linux scripts/docproc.c:
commit f0f3ca8d967462dafb815412b14ca3339b9817a6
Date: Wed Jun 15 11:53:13 2011 +0200

Linux scripts/kernel-doc:
commit 1b40c1944db445c1de1c47ffd8cd426167f488e8
Date: Sun Aug 12 10:46:15 2012 +0200

Linux Documentation/DocBook:
commit bb8187d35f820671d6dd76700d77a6b55f95e2c5
Date: Thu May 17 19:06:13 2012 -0400

Signed-off-by: Marek Vasut <marex@denx.de>

show more ...

ARM: prevent misaligned array inits

Under option -munaligned-access, gcc can perform local char
or 16-bit array initializations using misaligned native
accesses which will throw a data abort excepti

ARM: prevent misaligned array inits

Under option -munaligned-access, gcc can perform local char
or 16-bit array initializations using misaligned native
accesses which will throw a data abort exception. Fix files
where these array initializations were unneeded, and for
files known to contain such initializations, enforce gcc
option -mno-unaligned-access.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
[trini: Switch to usign call cc-option for -mno-unaligned-access as
Albert had done previously as that's really correct]
Signed-off-by: Tom Rini <trini@ti.com>

show more ...

MPC85xx: remove support for TQM85xx boards

Due to grown code sizes the TQM85xx boards don't build any more with
some older tool chains (like ELDK 4.2). As these boards have long
reached EOL it seem

MPC85xx: remove support for TQM85xx boards

Due to grown code sizes the TQM85xx boards don't build any more with
some older tool chains (like ELDK 4.2). As these boards have long
reached EOL it seems a waste of effort trying to fix them. The vendor
has agreed to drop support for them, too. So let's get rid of them.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
cc: Kim Phillips <kim.phillips@freescale.com>
Acked-by: Stefan Roese <sr@denx.de>

show more ...

ARM : Add support for MINI2440 (s3c2440).

Support of the MINI2440 board from FriendlyARM from
an old version of u-boot :
http://repo.or.cz/r/u-boot-openmoko/mini2440.git

Currently, supporting only

ARM : Add support for MINI2440 (s3c2440).

Support of the MINI2440 board from FriendlyARM from
an old version of u-boot :
http://repo.or.cz/r/u-boot-openmoko/mini2440.git

Currently, supporting only boot from NOR.

Signed-off-by: Gabriel Huau <contact@huau-gabriel.fr>

show more ...

doc/git-mailrc: Add 'rmobile' alias

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

rmobile: Add README

This add README of Renesas RMOBILE.
Based doc/README.omap3.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Tom Rini <trini@ti.com>

Merge branch 'master' of git://git.denx.de/u-boot-net

SPL: Add support for loading image from ram in SPL.

Signed-off-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Tom Rini <trini@ti.com>

PXE: FDT: Add support for fdt in PXE

Now DT support is becoming common for all new SoC's. Hence it is better
to have option for getting specific FDT from the remote server.

This patch adds support

PXE: FDT: Add support for fdt in PXE

Now DT support is becoming common for all new SoC's. Hence it is better
to have option for getting specific FDT from the remote server.

This patch adds support for new label i.e. 'fdt'. This will allow to
retrieve 'fdt blob' from the remote server. This patch take care for
the following scenarios.

The usage of fdt is optional.
The 'fdt blob' can be retrieved from tftp or can be available locally
or can be absent.

If 'fdt_addr_r' environment variable is set and 'fdt' label is defined
retrieve 'fdt blob' from tftp. 'fdt_addr_r' is then passed along bootm
command.

If 'fdt_addr' is set and 'fdt blob' is not retrieved from the tftp pass
'fdt_addr' to bootm command. In this case 'fdt blob' will be available
at 'fdt_addr'.

If 'fdt_addr' is not set and 'fdt blob' is not retrieve from tftp pass
NULL to boot command. In this case 'fdt blob' is not required and absent.

Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
Acked-by: Jason Hobbs <jason.hobbs@calxeda.com>

show more ...

README.commands: Document what UNDEF_SYM does

Changes in v2:
- Reword a bit more

Signed-off-by: Tom Rini <trini@ti.com>

Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

net: Make the netconsole buffer size configurable

Allow a board to configure a larger buffer for netconsole, but leave
the default.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Mike

net: Make the netconsole buffer size configurable

Allow a board to configure a larger buffer for netconsole, but leave
the default.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>

show more ...

net: Make netconsole src and dest ports configurable

It is desirable to use different port numbers for sending and receiving
packets with netconsole in the case where you have more than one device
o

net: Make netconsole src and dest ports configurable

It is desirable to use different port numbers for sending and receiving
packets with netconsole in the case where you have more than one device
on the local subnet with netconsole enabled for broadcast. When they
use the same port for both, any output from one will look like input to
the other. This is typlically not desirable.

This patch allows the input and output ports to be specified separately
in the environment.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-arm

Merge branch 'ext4'

Update Makefile change for LIBS -> LIBS-y change.

Conflicts:
Makefile

Signed-off-by: Tom Rini <trini@ti.com>

ARM: Remove apollon board

This board is the only board that still sticks to OneNAND IPL.
Remove this board, since we have SPL around for a while and
OneNAND is well supported in the SPL framework. T

ARM: Remove apollon board

This board is the only board that still sticks to OneNAND IPL.
Remove this board, since we have SPL around for a while and
OneNAND is well supported in the SPL framework. The board can
be revived if necessary.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Tom Rini <trini@ti.com>

show more ...

nand: Add support for unlock.invert

NAND unlock command allows an invert bit to be set to unlock all but
the selected page range.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
[scottwood@

nand: Add support for unlock.invert

NAND unlock command allows an invert bit to be set to unlock all but
the selected page range.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
[scottwood@freescale.com: updated docs and added comment about invert bit]
Signed-off-by: Scott Wood <scottwood@freescale.com>

show more ...

tegra: fdt: Add NAND controller binding and definitions

Add a NAND controller along with a bindings file for review.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren

tegra: fdt: Add NAND controller binding and definitions

Add a NAND controller along with a bindings file for review.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>

show more ...

cosmetic: Better explain how to use the kirkwood kwbimage.cfg file.

Hi,

This adds to the documenation to explain how to use the
kwbimage.cfg file necessary to generate an image with
prefixed board

cosmetic: Better explain how to use the kirkwood kwbimage.cfg file.

Hi,

This adds to the documenation to explain how to use the
kwbimage.cfg file necessary to generate an image with
prefixed board setup values necessary for the kirkwood
boards.

Signed-off-by: Karl O. Pinc <kop@meme.com>

show more ...

Cosmetic doc typo fixes to the kwbimage feature docs

Signed-off-by: Karl O. Pinc <kop@meme.com>

README.SPL: Move the 'Estimating stack usage' from omap3 to here

The instructions are generic, so move to the generic doc.

Signed-off-by: Tom Rini <trini@ti.com>

README.SPL: Add a small Debugging section

Signed-off-by: Tom Rini <trini@ti.com>