sun7i: Add bananapi board

The Banana Pi is an A20 based development board using Raspberry Pi compatible
IO headers. It comes with 1 GB RAM, 1 Gb ethernet, 2x USB host, sata, hdmi
and stereo audio ou

sun7i: Add bananapi board

The Banana Pi is an A20 based development board using Raspberry Pi compatible
IO headers. It comes with 1 GB RAM, 1 Gb ethernet, 2x USB host, sata, hdmi
and stereo audio out + various expansion headers:

http://www.lemaker.org/

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

show more ...

sun7i: Add support for a number of new sun7i boards

Add support for boards which I own and which already have a dts file in the
upstream kernel.

Signed-off-by: Henrik Nordstrom <henrik@henriknordst

sun7i: Add support for a number of new sun7i boards

Add support for boards which I own and which already have a dts file in the
upstream kernel.

Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net>
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

show more ...

sun5i: Add support for a number of new sun5i boards

Add support for boards which I own and which already have a dts file in the
upstream kernel.

Signed-off-by: Henrik Nordstrom <henrik@henriknordst

sun5i: Add support for a number of new sun5i boards

Add support for boards which I own and which already have a dts file in the
upstream kernel.

Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net>
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

show more ...

sun4i: Add support for a number of new sun4i boards

Add support for boards which I own and which already have a dts file in the
upstream kernel.

Signed-off-by: Henrik Nordstrom <henrik@henriknordst

sun4i: Add support for a number of new sun4i boards

Add support for boards which I own and which already have a dts file in the
upstream kernel.

Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net>
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

show more ...

sunxi: Enable EHCI on various sunxi boards

Most sunxi boards have the EHCI controller hooked up, enable it on all
relevant boards.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian C

sunxi: Enable EHCI on various sunxi boards

Most sunxi boards have the EHCI controller hooked up, enable it on all
relevant boards.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

show more ...

cubieboard2: Enable AXP209 power controller

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

sun7i: cubietruck: enable USB EHCI

Cubietruck has two USB host controllers. This makes them
usable by enabling the EHCI driver for them.

Signed-off-by: Roman Byshko <rbyshko@gmail.com>
Acked-by: Ia

sun7i: cubietruck: enable USB EHCI

Cubietruck has two USB host controllers. This makes them
usable by enabling the EHCI driver for them.

Signed-off-by: Roman Byshko <rbyshko@gmail.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
[hdegoede@redhat.com: Also enable ehci for Cubietruck_FEL]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

show more ...

ahci: provide sunxi SATA driver using AHCI platform framework

This enables the necessary clocks, in AHB0 and in PLL6_CFG. This is done
for sun7i only since I don't have access to any other sunxi pla

ahci: provide sunxi SATA driver using AHCI platform framework

This enables the necessary clocks, in AHB0 and in PLL6_CFG. This is done
for sun7i only since I don't have access to any other sunxi platforms
with sata included.

The PHY setup is derived from the Alwinner releases and Linux, but is mostly
undocumented.

The Allwinner AHCI controller also requires some magic (and, again,
undocumented) DMA initialisation when starting a port. This is added under a
suitable ifdef.

This option is enabled for Cubieboard, Cubieboard2 and Cubietruck based on
contents of Linux DTS files, including SATA power pin config taken from the
DTS. All build tested, but runtime tested on Cubieboard2 and Cubietruck only.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

show more ...

kconfig: add board Kconfig and defconfig files

This commit adds:
- arch/${ARCH}/Kconfig
provide a menu to select target boards
- board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig

kconfig: add board Kconfig and defconfig files

This commit adds:
- arch/${ARCH}/Kconfig
provide a menu to select target boards
- board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
set CONFIG macros to the appropriate values for each board
- configs/${TARGET_BOARD}_defconfig
default setting of each board

(This commit was automatically generated by a conversion script
based on boards.cfg)

In Linux Kernel, defconfig files are located under
arch/${ARCH}/configs/ directory.
It works in Linux Kernel since ARCH is always given from the
command line for cross compile.

But in U-Boot, ARCH is not given from the command line.
Which means we cannot know ARCH until the board configuration is done.
That is why all the "*_defconfig" files should be gathered into a
single directory ./configs/.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...