| #
9adda545 |
| 30-Jun-2009 |
Peter Tyser <ptyser@xes-inc.com> |
83xx: Replace CONFIG_ECC_INIT_VIA_DDRC references
Update 83xx architecture's CONFIG_ECC_INIT_VIA_DDRC references to
CONFIG_ECC_INIT_VIA_DDRCONTROLLER, which other Freescale architectures
use
Signed
83xx: Replace CONFIG_ECC_INIT_VIA_DDRC references
Update 83xx architecture's CONFIG_ECC_INIT_VIA_DDRC references to
CONFIG_ECC_INIT_VIA_DDRCONTROLLER, which other Freescale architectures
use
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
show more ...
|
| #
e1ac387f |
| 30-Oct-2008 |
Andy Fleming <afleming@freescale.com> |
83xx: Add eSDHC support on 8379 EMDS board
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
| #
ef29884b |
| 25-Jan-2009 |
Ben Warren <biggerbadderben@gmail.com> |
Merge git://git.denx.de/u-boot into u-boot
|
| #
1ea08237 |
| 24-Jan-2009 |
Wolfgang Denk <wd@denx.de> |
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx
|
| #
833d94bc |
| 23-Jan-2009 |
Kim Phillips <kim.phillips@freescale.com> |
Merge branch 'next'
|
| #
8b34557c |
| 08-Jan-2009 |
Anton Vorontsov <avorontsov@ru.mvista.com> |
mpc83xx: Add PCI-E support for MPC837XEMDS boards
MPC837XEMDS boards can support PCI-E via "PCI-E riser card". The card
provides two PCI-E (x2) ports. Though, only one port can be used in x2
mode. T
mpc83xx: Add PCI-E support for MPC837XEMDS boards
MPC837XEMDS boards can support PCI-E via "PCI-E riser card". The card
provides two PCI-E (x2) ports. Though, only one port can be used in x2
mode. Two ports can function simultaneously in x1 mode.
PCI-E x1/x2 modes can be switched via "pex_x2" environment variable.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
show more ...
|
| #
cb547320 |
| 17-Dec-2008 |
Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
Merge branch 'fixes' into cleanups
Conflicts:
board/atmel/atngw100/atngw100.c
board/atmel/atstk1000/atstk1000.c
cpu/at32ap/at32ap700x/gpio.c
include/asm-avr32/arch-at32ap700x/clk.h
include/con
Merge branch 'fixes' into cleanups
Conflicts:
board/atmel/atngw100/atngw100.c
board/atmel/atstk1000/atstk1000.c
cpu/at32ap/at32ap700x/gpio.c
include/asm-avr32/arch-at32ap700x/clk.h
include/configs/atngw100.h
include/configs/atstk1002.h
include/configs/atstk1003.h
include/configs/atstk1004.h
include/configs/atstk1006.h
include/configs/favr-32-ezkit.h
include/configs/hammerhead.h
include/configs/mimc200.h
show more ...
|
| #
3bf1be3c |
| 14-Oct-2008 |
Anton Vorontsov <avorontsov@ru.mvista.com> |
mpc83xx: add support for switching between USB Host/Function for MPC837XEMDS
With this patch u-boot can fixup the dr_mode and phy_type properties
for the Dual-Role USB controller.
While at it, also
mpc83xx: add support for switching between USB Host/Function for MPC837XEMDS
With this patch u-boot can fixup the dr_mode and phy_type properties
for the Dual-Role USB controller.
While at it, also remove #ifdefs around includes, they are not needed.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
show more ...
|
| #
00f7bbae |
| 02-Oct-2008 |
Anton Vorontsov <avorontsov@ru.mvista.com> |
mpc83xx: fix PCI scan hang on the standalone MPC837xE-MDS boards
The MPC837xE-MDS board's CPLD can auto-detect if the board is on the PIB,
standalone or acting as a PCI agent. User's Guide says:
-
mpc83xx: fix PCI scan hang on the standalone MPC837xE-MDS boards
The MPC837xE-MDS board's CPLD can auto-detect if the board is on the PIB,
standalone or acting as a PCI agent. User's Guide says:
- When the CPLD recognizes its location on the PIB it automatically
configures RCW to the PCI Host.
- If the CPLD fails to recognize its location then it is automatically
configured as an Agent and the PCI is configured to an external arbiter.
This sounds good. Though in the standalone setup the CPLD sets PCI_HOST
flag (it's ok, we can't act as PCI agents since we receive CLKIN, not
PCICLK), but the CPLD doesn't set the ARBITER_ENABLE flag, and without
any arbiter bad things will happen (here the board hangs during any config
space reads).
In this situation we must disable the PCI. And in case of anybody really
want to use an external arbiter, we provide "pci_external_aribter"
environment variable.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
show more ...
|
| #
1da83a63 |
| 02-Oct-2008 |
Anton Vorontsov <avorontsov@ru.mvista.com> |
mpc83xx: add SGMII riser module support for the MPC8378E-MDS boards
This involves configuring the SerDes and fixing up the flags and
PHY addresses for the TSECs.
For Linux we also fix up the device
mpc83xx: add SGMII riser module support for the MPC8378E-MDS boards
This involves configuring the SerDes and fixing up the flags and
PHY addresses for the TSECs.
For Linux we also fix up the device tree.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
show more ...
|
| #
55c53198 |
| 02-Oct-2008 |
Anton Vorontsov <avorontsov@ru.mvista.com> |
mpc83xx: fix serdes setup for the MPC8378E boards
MPC837xE specs says that SerDes1 has:
— Two lanes running x1 SGMII at 1.25 Gbps;
— Two lanes running x1 SATA at 1.5 or 3.0 Gbps.
And for SerDes2:
mpc83xx: fix serdes setup for the MPC8378E boards
MPC837xE specs says that SerDes1 has:
— Two lanes running x1 SGMII at 1.25 Gbps;
— Two lanes running x1 SATA at 1.5 or 3.0 Gbps.
And for SerDes2:
— Two lanes running x1 PCI Express at 2.5 Gbps;
— One lane running x2 PCI Express at 2.5 Gbps;
— Two lanes running x1 SATA at 1.5 or 3.0 Gbps.
The spec also explicitly states that PEX options are not valid for
the SD1.
Nevertheless MPC8378 RDB and MDS boards configure the SD1 for PEX,
which is wrong to do.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
show more ...
|
| #
f61f1e15 |
| 21-Oct-2008 |
Stefan Roese <sr@denx.de> |
Merge branch 'master' of /home/stefan/git/u-boot/u-boot
|
| #
50bd0057 |
| 21-Oct-2008 |
Markus Klotzbuecher <mk@denx.de> |
Merge git://git.denx.de/u-boot into x1
Conflicts:
drivers/usb/usb_ohci.c
|
| #
f82642e3 |
| 18-Oct-2008 |
Wolfgang Denk <wd@denx.de> |
Merge 'next' branch
Conflicts:
board/freescale/mpc8536ds/mpc8536ds.c
include/configs/mgcoge.h
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
| #
6d0f6bcf |
| 16-Oct-2008 |
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
|
| #
1f6aa622 |
| 13-Oct-2008 |
Stefan Roese <sr@denx.de> |
Merge branch 'master' of /home/stefan/git/u-boot/u-boot
|
| #
1e841086 |
| 12-Oct-2008 |
Wolfgang Denk <wd@denx.de> |
Merge branch 'master' of ssh://10.10.0.7/home/wd/git/u-boot/master
|
| #
d26154c9 |
| 11-Sep-2008 |
Anton Vorontsov <avorontsov@ru.mvista.com> |
mpc83xx: spd_sdram: fix ddr sdram base address assignment bug
The spd_dram code shifts the base address, then masks 20 bits, but
forgets to shift the base address back. Fix this by just masking the
mpc83xx: spd_sdram: fix ddr sdram base address assignment bug
The spd_dram code shifts the base address, then masks 20 bits, but
forgets to shift the base address back. Fix this by just masking the
base address correctly.
Found this bug while trying to relocate a DDR memory at the base != 0.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
show more ...
|
| #
794a5924 |
| 10-Jul-2008 |
Markus Klotzbuecher <mk@denx.de> |
Merge branch 'master' of git://www.denx.de/git/u-boot
|
| #
9973e3c6 |
| 09-Jun-2008 |
Becky Bruce <becky.bruce@freescale.com> |
Change initdram() return type to phys_size_t
This patch changes the return type of initdram() from long int to phys_size_t.
This is required for a couple of reasons: long int limits the amount of dr
Change initdram() return type to phys_size_t
This patch changes the return type of initdram() from long int to phys_size_t.
This is required for a couple of reasons: long int limits the amount of dram
to 2GB, and u-boot in general is moving over to phys_size_t to represent the
size of physical memory. phys_size_t is defined as an unsigned long on almost
all current platforms.
This patch *only* changes the return type of the initdram function (in
include/common.h, as well as in each board's implementation of initdram). It
does not actually modify the code inside the function on any of the platforms;
platforms which wish to support more than 2GB of DRAM will need to modify
their initdram() function code.
Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
MPC8641HPCN.
Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
show more ...
|
| #
8c8428a5 |
| 13-Apr-2008 |
Wolfgang Denk <wd@denx.de> |
Merge branch 'master' of /home/wd/git/u-boot/custodians
|
| #
8258b6e2 |
| 13-Apr-2008 |
Wolfgang Denk <wd@denx.de> |
Merge branch 'master' of git://www.denx.de/git/u-boot-mpc83xx
|
| #
5fb5a689 |
| 31-Mar-2008 |
Dave Liu <r63238@freescale.com> |
mpc83xx: Fix the bug of serdes initialization
Currently the serdes will not be initializated due to the
partid's error.
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <
mpc83xx: Fix the bug of serdes initialization
Currently the serdes will not be initializated due to the
partid's error.
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
show more ...
|
| #
e59af4b6 |
| 07-Apr-2008 |
Wolfgang Denk <wd@denx.de> |
Merge branch 'master' of git://www.denx.de/git/u-boot-mpc83xx
Conflicts:
lib_ppc/board.c
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
| #
e5c4ade4 |
| 28-Mar-2008 |
Kim Phillips <kim.phillips@freescale.com> |
mpc83xx: cleanup System Part and Revision ID Register (SPRIDR) code
in the spirit of commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6,
85xx's "Update SVR numbers to expand support", simplify SPRIDR p
mpc83xx: cleanup System Part and Revision ID Register (SPRIDR) code
in the spirit of commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6,
85xx's "Update SVR numbers to expand support", simplify SPRIDR processing
and processor ID display. Add REVID_{MAJ,MIN}OR macros to make
REVID dependent code simpler. Also added PARTID_NO_E and IS_E_PROCESSOR
convenience macros.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
show more ...
|