Change stub example to use asm-generic/sections.h

We can use the declarations of __bss_start and _end from this header
instead of declaring them locally.

Signed-off-by: Simon Glass <sjg@chromium.or

Change stub example to use asm-generic/sections.h

We can use the declarations of __bss_start and _end from this header
instead of declaring them locally.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

Merge u-boot/master into u-boot-ti/master

In master we had already taken a patch to fix the davinci GPIO code for
CONFIG_SOC_DM646X and in u-boot-ti we have additional patches to support
DA830 (whic

Merge u-boot/master into u-boot-ti/master

In master we had already taken a patch to fix the davinci GPIO code for
CONFIG_SOC_DM646X and in u-boot-ti we have additional patches to support
DA830 (which is CONFIG_SOC_DA8XX && !CONFIG_SOC_DA850). Resolve these
conflicts manually and comment the #else/#endif lines for clarity.

Conflicts:
arch/arm/include/asm/arch-davinci/gpio.h
drivers/gpio/da8xx_gpio.c

Signed-off-by: Tom Rini <trini@ti.com>

show more ...

x86: Add an __end symbol to signal the end of the U-Boot binary

With this symbol we can easy append something (e.g. an FDT) to the U-Boot
binary and access it from within U-Boot.

Signed-off-by: Sim

x86: Add an __end symbol to signal the end of the U-Boot binary

With this symbol we can easy append something (e.g. an FDT) to the U-Boot
binary and access it from within U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

Merge samsung, imx, tegra into u-boot-arm/master

This commit merges branches from samsung, imx and tegra
meant to fix merge issues between u-boot/master and
u-boot-arm/master, as well as a few manua

Merge samsung, imx, tegra into u-boot-arm/master

This commit merges branches from samsung, imx and tegra
meant to fix merge issues between u-boot/master and
u-boot-arm/master, as well as a few manual merge fixes.

show more ...

Merge remote-tracking branch 'u-boot/master' into u-boot-arm-merged

Conflicts:
README
arch/arm/cpu/armv7/exynos/clock.c
board/samsung/universal_c210/universal.c
drivers/misc/Makefile
drivers/po

Merge remote-tracking branch 'u-boot/master' into u-boot-arm-merged

Conflicts:
README
arch/arm/cpu/armv7/exynos/clock.c
board/samsung/universal_c210/universal.c
drivers/misc/Makefile
drivers/power/power_fsl.c
include/configs/mx35pdk.h
include/configs/mx53loco.h
include/configs/seaboard.h

show more ...

Merge branch 'master' of git://git.denx.de/u-boot into resolve

Conflicts:
README
board/samsung/universal_c210/universal.c
drivers/misc/Makefile
drivers/power/power_fsl.c
include/configs/mx35pdk

Merge branch 'master' of git://git.denx.de/u-boot into resolve

Conflicts:
README
board/samsung/universal_c210/universal.c
drivers/misc/Makefile
drivers/power/power_fsl.c
include/configs/mx35pdk.h
include/configs/mx53loco.h
include/configs/seaboard.h

show more ...

Merge branch 'master' of git://git.denx.de/u-boot into master

Conflicts:
drivers/power/power_fsl.c
include/configs/mx35pdk.h
include/configs/mx53loco.h
include/configs/woodburn_common.h
board/w

Merge branch 'master' of git://git.denx.de/u-boot into master

Conflicts:
drivers/power/power_fsl.c
include/configs/mx35pdk.h
include/configs/mx53loco.h
include/configs/woodburn_common.h
board/woodburn/woodburn.c

These boards still use the old old PMIC framework, so they
do not merge properly after the power framework was merged into
mainline.

Fix all conflicts and update woodburn to use Power Framework.

Signed-off-by: Stefano Babic <sbabic@denx.de>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-x86

x86: Remove video_init() prototype from u-boot-x86.h

This function is not intended to be exported from the video drivers, so
remove the prototype. This fixes an error:

cfb_console.c:1793:12: error:

x86: Remove video_init() prototype from u-boot-x86.h

This function is not intended to be exported from the video drivers, so
remove the prototype. This fixes an error:

cfb_console.c:1793:12: error: static declaration of 'video_init' follows non-static declaration

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

x86: Add function to read time stamp counter

Put this function in the u-boot-x86.h header file. We could instead create
timer.h perhaps.

We support setting a base time, and reading the time relativ

x86: Add function to read time stamp counter

Put this function in the u-boot-x86.h header file. We could instead create
timer.h perhaps.

We support setting a base time, and reading the time relative to this base.

Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-x86

x86: Add a default implementation for cleanup_before_linux()

This function provides an opportunity for some last minute cleanup and
reconfiguration before control is handed over to Linux. It's possi

x86: Add a default implementation for cleanup_before_linux()

This function provides an opportunity for some last minute cleanup and
reconfiguration before control is handed over to Linux. It's possible this
may need to do something in the future, but for now it's left empty. It's set
up as a weak symbol so it can be overridden if necessary on a case by case
basis.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-x86

* 'master' of git://git.denx.de/u-boot-x86:
x86: Convert board_init_f_r to a processing loop
x86: Split init functions out of board.c
x86:

Merge branch 'master' of git://git.denx.de/u-boot-x86

* 'master' of git://git.denx.de/u-boot-x86:
x86: Convert board_init_f_r to a processing loop
x86: Split init functions out of board.c
x86: Move relocation code out of board.c
x86: Move setup_pcat_compatibility() out of board.c
x86: Move do_go_exec() out of board.c
CHECKPATCH: arch/x86/lib/*
x86: Tweak IDT and GDT for alignment and readability
x86: Allow cache before copy to RAM
x86: Create weak init_cache() and default enable_caches() functions
x86: Set GD_FLG_RELOC after entering in-RAM copy of U-Boot
x86: Use fs for global data
x86: Rework relocation calculations
x86: Simplify Flash-to-RAM code execution transition
x86: Rework Global Descriptor Table loading
x86: Remove GDR related magic numbers
x86: Speed up copy-to-RAM and clear BSS operations
x86: Import glibc memcpy implementation

show more ...

Merge branch 'staging'

x86: Create weak init_cache() and default enable_caches() functions

--
Changes for v2:
- Tweaked commit title

x86: Use fs for global data

Use the base address of the 'F' segment as a pointer to the global data
structure. By adding the linear address (i.e. the 'D' segment address) as
the first word of the gl

x86: Use fs for global data

Use the base address of the 'F' segment as a pointer to the global data
structure. By adding the linear address (i.e. the 'D' segment address) as
the first word of the global data structure, the address of the global data
relative to the 'D' segment can be found simply, for example, by:

fs movl 0, %eax

This makes the gd 'pointer' writable prior to relocation (by reloading the
Global Desctriptor Table) which brings x86 into line with all other arches

NOTE: Writing to the gd 'pointer' is expensive (but we only do it
twice) but using it to access global data members (read and write) is
still fairly cheap

--
Changes for v2:
- Rebased against changes made to patch #3
- Removed extra indent
- Tweaked commit message

show more ...

x86: Simplify Flash-to-RAM code execution transition

Move the relocation offset calculation out of assembler and into C. This
also paves the way for the upcoming init sequence simplification by addi

x86: Simplify Flash-to-RAM code execution transition

Move the relocation offset calculation out of assembler and into C. This
also paves the way for the upcoming init sequence simplification by adding
the board_init_f_r flash to RAM transitional function

--
Changes for v2:
- Added commit message
- Minor adjustment to new stack address comment

show more ...

Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/master

* 'master' of ssh://gemini/home/wd/git/u-boot/master:
board/emk/top860/top860.c: Fix GCC 4.6 build warning
board/sbc405/strataflas

Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/master

* 'master' of ssh://gemini/home/wd/git/u-boot/master:
board/emk/top860/top860.c: Fix GCC 4.6 build warning
board/sbc405/strataflash.c: Fix GCC 4.6 build warning
arch/powerpc/cpu/mpc86xx/cpu.c: Fix GCC 4.6 build warning
board/freescale/mpc8610hpcd/mpc8610hpcd.c: Fix GCC 4.6 build warning
board/mpl/common/flash.c: Fix GCC 4.6 build warning
post/board/lwmon5/gdc.c: Fix GCC 4.6 build warning
drivers/usb/host/sl811-hcd.c: Fix GCC 4.6 build warning
board/sandburst/common/flash.c: Fix GCC 4.6 build warning
DB64460: Fix GCC 4.6 build warnings
DB64360: Fix GCC 4.6 build warnings
board/cray/L1/flash.c: Fix GCC 4.6 build warning
drivers/block/sata_dwc.c: Fix GCC 4.6 build warning
board/amirix/ap1000/flash.c: Fix GCC 4.6 build warning
alpr board: Fix GCC 4.6 build warnings
image: Don't detect XIP images as overlapping.
image: Implement IH_TYPE_KERNEL_NOLOAD
ppc4xx: Add Io64 board support
ppc4xx: fix PMC440 painit command
ppc4xx: remove invalid access to PCI_BRDGOPT2 register
ppc4xx: use CONFIG_PCI_BOOTDELAY instead of private implementation
mpc85xx: support for Freescale COM Express P2020
arch/powerpc/cpu/mpc8xxx/ddr/interactive.c: Fix GCC 4.6 build warning
mpc85xx: support board-specific reset function
powerpc/85xx: verify the localbus device tree address before booting the OS
mpc8xxx: update module_type values from JEDEC DDR3 SPD Specification
powerpc/p3060qds: Add board related support for P3060QDS platform
powerpc/85xx: clean up and document the QE/FMAN microcode macros
powerpc/85xx: always implement the work-around for Erratum SATA_A001
powerpc/85xx: CONFIG_FSL_SATA_V2 should be defined in config_mpc85xx.h
powerpc/85xx: Add workaround for erratum A-003474
powerpc/85xx: fixup flexcan device tree clock-frequency
powerpc/85xx: Add workaround for erratum CPU-A003999
x86: Fix some bugs in the i8402 driver when no controller is present
x86: Make the i8042 driver checkpatch clean
x86: Wrap small helper functions from libgcc to avoid an ABI mismatch
x86: Import the glibc memset implementation
x86: Fix a few recently added bugs
x86: Don't relocate symbols which point to things that aren't relocated
x86: Fix how the location of the realmode and bios blobs are calculated
x86: Misc cleanups
x86: Misc PCI touchups
x86: Ensure IDT and GDT remain 16-byte aligned post relocation
x86: Provide more configuration granularity
x86: Add multiboot header
sc520: Create arch asm-offsets
x86: Punt cold- and warm-boot flags
cosmetic: checkpatch cleanup of board/eNET/*.c
cosmetic: checkpatch cleanup of arch/x86/lib/*.c
cosmetic: checkpatch cleanup of arch/x86/cpu/sc520/*.c
cosmetic: checkpatch cleanup of arch/x86/cpu/*.c
x86: Call hang() on unrecoverable exception
menu.c: use puts() instead of printf() where possible
MAKEALL: drop obsolete mx31pdk_nand target
dataflash: fix parameters order in write_dataflash()
hawkboard: Replace HAWKBOARD_KICK{0, 1}_UNLOCK defines
davinci_sonata: define CONFIG_MACH_TYPE for davinci_sonata board
davinci_schmoogie: define CONFIG_MACH_TYPE for davinci_schmoogie board
arm: a320evb: define mach-type in board config file
OMAP3: Use sdelay from arch/arm/cpu/armv7/syslib.c instead of cloning that.
Fix Stelian's email address
DIU: 1080P and 720P support
CFB: Fix font rendering on mx5 framebuffer

show more ...

cosmetic: checkpatch cleanup of arch/x86/lib/*.c

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

Merge branch 'master' of git://git.denx.de/u-boot-x86

* 'master' of git://git.denx.de/u-boot-x86:
x86: Fix a compiler warning in arch/x86/lib/realmode.c
x86: Remove the prototype for the unused

Merge branch 'master' of git://git.denx.de/u-boot-x86

* 'master' of git://git.denx.de/u-boot-x86:
x86: Fix a compiler warning in arch/x86/lib/realmode.c
x86: Remove the prototype for the unused function board_init
x86: Rename include/asm/ic to include/asm/arch-sc520
x86: turn off cache: set control register properly

show more ...

x86: Remove the prototype for the unused function board_init

Signed-off-by: Gabe Black <gabeblack@chromium.org>

Convert ISO-8859 files to UTF-8

There was a mix of UTF-8 and ISO-8859 files in the U-Boot source
tree, which could cause issues with the patchwork review system.
This commit converts all ISO-8859 fi

Convert ISO-8859 files to UTF-8

There was a mix of UTF-8 and ISO-8859 files in the U-Boot source
tree, which could cause issues with the patchwork review system.
This commit converts all ISO-8859 files to UTF-8.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>

show more ...

Unify timer_init() and cpu_init() prototypes

Clean up some duplicated prototype declarations.
Get rid of now useless AVR32 initcalls.h file.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert Ari

Unify timer_init() and cpu_init() prototypes

Clean up some duplicated prototype declarations.
Get rid of now useless AVR32 initcalls.h file.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert Aribaud <albert.aribaud@free.fr>
Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: Graeme Russ <graeme.russ@gmail.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-x86

x86: Rename i386 to x86

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>